diff mbox series

[v2,04/10] PCI: pciehp: Do not handle events if interrupts are masked

Message ID 20180913143322.77953-5-mika.westerberg@linux.intel.com (mailing list archive)
State Not Applicable
Headers show
Series PCI: Allow D3cold for PCIe hierarchies | expand

Commit Message

Mika Westerberg Sept. 13, 2018, 2:33 p.m. UTC 
PCIe native hotplug shares MSI vector with native PME so the interrupt
handler might get called even the hotplug interrupt is masked. In that
case we should not handle any events because the interrupt was not meant
for us. Modify the PCIe hotplug interrupt handler to check this
accordingly and bail out if it finds out that the interrupt was not
about hotplug.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
---
 drivers/pci/hotplug/pciehp_hpc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 02fb6e367e2a..26598a03e84b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -533,9 +533,11 @@  static irqreturn_t pciehp_isr(int irq, void *dev_id)
 	u16 status, events;
 
 	/*
-	 * Interrupts only occur in D3hot or shallower (PCIe r4.0, sec 6.7.3.4).
+	 * Interrupts only occur in D3hot or shallower and only if enabled
+	 * in the Slot Control register (PCIe r4.0, sec 6.7.3.4).
 	 */
-	if (pdev->current_state == PCI_D3cold)
+	if (pdev->current_state == PCI_D3cold ||
+	    (!(ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE) && !pciehp_poll_mode))
 		return IRQ_NONE;
 
 	/*