| Message ID | 20181114224921.12123-6-keith.busch@intel.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | ACPI HMAT memory sysfs representation | expand |
On 11/14/18 2:49 PM, Keith Busch wrote: > + # tree sys/devices/system/node/node0/cache/ > + /sys/devices/system/node/node0/cache/ > + |-- index1 > + | |-- associativity > + | |-- level > + | |-- line_size > + | |-- size > + | `-- write_policy Whoops, and here it is...
On Wed, 14 Nov 2018 15:49:18 -0700 Keith Busch <keith.busch@intel.com> wrote: > Platforms may provide system memory that contains side caches to help If we can call them "memory-side caches" that would avoid a persistent confusion on what they actually are. It took me ages to get to the bottom of why they were always drawn to the side of the memory path ;) > spped up access. These memory caches are part of a memory node and speed > the cache attributes are exported by the kernel. > > Add new documentation providing a brief overview of system memory side > caches and the kernel provided attributes for application optimization. A few few nits in line, but mostly looks good to me. Thanks, Jonathan > > Signed-off-by: Keith Busch <keith.busch@intel.com> > --- > Documentation/vm/numacache.rst | 76 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/vm/numacache.rst > > diff --git a/Documentation/vm/numacache.rst b/Documentation/vm/numacache.rst > new file mode 100644 > index 000000000000..e79c801b7e3b > --- /dev/null > +++ b/Documentation/vm/numacache.rst > @@ -0,0 +1,76 @@ > +.. _numacache: > + > +========== > +NUMA Cache > +========== > + > +System memory may be constructed in a hierarchy of various performing of elements with various performance > +characteristics in order to provide large address space of slower > +performing memory cached by a smaller size of higher performing cached by smaller higher performing memory. > +memory. The system physical addresses that software is aware of see is aware of is provided (no 'see') > +is provided by the last memory level in the hierarchy, while higher > +performing memory transparently provides caching to slower levels. > + > +The term "far memory" is used to denote the last level memory in the > +hierarchy. Each increasing cache level provides higher performing CPU initiator rather than CPU? > +access, and the term "near memory" represents the highest level cache > +provided by the system. This number is different than CPU caches where > +the cache level (ex: L1, L2, L3) uses a CPU centric view with each level > +being lower performing and closer to system memory. The memory cache > +level is centric to the last level memory, so the higher numbered cache from the last level memory? > +level denotes memory nearer to the CPU, and further from far memory. > + > +The memory side caches are not directly addressable by software. When > +software accesses a system address, the system will return it from the > +near memory cache if it is present. If it is not present, the system > +accesses the next level of memory until there is either a hit in that > +cache level, or it reaches far memory. > + > +In order to maximize the performance out of such a setup, software may > +wish to query the memory cache attributes. If the system provides a way > +to query this information, for example with ACPI HMAT (Heterogeneous > +Memory Attribute Table)[1], the kernel will append these attributes to > +the NUMA node that provides the memory. > + > +When the kernel first registers a memory cache with a node, the kernel > +will create the following directory:: > + > + /sys/devices/system/node/nodeX/cache/ Given we have other things with caches in a numa node, should we make this name more specific? > + > +If that directory is not present, then either the memory does not have > +a side cache, or that information is not provided to the kernel. > + > +The attributes for each level of cache is provided under its cache > +level index:: > + > + /sys/devices/system/node/nodeX/cache/indexA/ > + /sys/devices/system/node/nodeX/cache/indexB/ > + /sys/devices/system/node/nodeX/cache/indexC/ > + > +Each cache level's directory provides its attributes. For example, > +the following is a single cache level and the attributes available for > +software to query:: > + > + # tree sys/devices/system/node/node0/cache/ > + /sys/devices/system/node/node0/cache/ > + |-- index1 > + | |-- associativity > + | |-- level > + | |-- line_size > + | |-- size > + | `-- write_policy > + > +The cache "associativity" will be 0 if it is a direct-mapped cache, and > +non-zero for any other indexed based, multi-way associativity. This description is a little vague. Right now I think we have 3 options from HMAT, 1) no associativity (which I suppose could also be called fully associative?) 2) direct mapped (0 in your case) 3) Complex (who knows!) So how do you map 1 and 3? > + > +The "level" is the distance from the far memory, and matches the number > +appended to its "index" directory. > + > +The "line_size" is the number of bytes accessed on a cache miss. > + > +The "size" is the number of bytes provided by this cache level. > + > +The "write_policy" will be 0 for write-back, and non-zero for > +write-through caching. Do these not appear if the write_policy provided by acpi is "none". > + > +[1] https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
On Wed, Nov 14, 2018 at 03:49:18PM -0700, Keith Busch wrote: > Platforms may provide system memory that contains side caches to help > spped up access. These memory caches are part of a memory node and > the cache attributes are exported by the kernel. > > Add new documentation providing a brief overview of system memory side > caches and the kernel provided attributes for application optimization. > > Signed-off-by: Keith Busch <keith.busch@intel.com> > --- > Documentation/vm/numacache.rst | 76 ++++++++++++++++++++++++++++++++++++++++++ I think it's better to have both numaperf and numacache in a single document, as they are quite related. > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/vm/numacache.rst > > diff --git a/Documentation/vm/numacache.rst b/Documentation/vm/numacache.rst > new file mode 100644 > index 000000000000..e79c801b7e3b > --- /dev/null > +++ b/Documentation/vm/numacache.rst > @@ -0,0 +1,76 @@ > +.. _numacache: > + > +========== > +NUMA Cache > +========== > + > +System memory may be constructed in a hierarchy of various performing > +characteristics in order to provide large address space of slower > +performing memory cached by a smaller size of higher performing > +memory. The system physical addresses that software is aware of see > +is provided by the last memory level in the hierarchy, while higher > +performing memory transparently provides caching to slower levels. > + > +The term "far memory" is used to denote the last level memory in the > +hierarchy. Each increasing cache level provides higher performing CPU > +access, and the term "near memory" represents the highest level cache > +provided by the system. This number is different than CPU caches where > +the cache level (ex: L1, L2, L3) uses a CPU centric view with each level > +being lower performing and closer to system memory. The memory cache > +level is centric to the last level memory, so the higher numbered cache > +level denotes memory nearer to the CPU, and further from far memory. > + > +The memory side caches are not directly addressable by software. When > +software accesses a system address, the system will return it from the > +near memory cache if it is present. If it is not present, the system > +accesses the next level of memory until there is either a hit in that > +cache level, or it reaches far memory. > + > +In order to maximize the performance out of such a setup, software may > +wish to query the memory cache attributes. If the system provides a way > +to query this information, for example with ACPI HMAT (Heterogeneous > +Memory Attribute Table)[1], the kernel will append these attributes to > +the NUMA node that provides the memory. > + > +When the kernel first registers a memory cache with a node, the kernel > +will create the following directory:: > + > + /sys/devices/system/node/nodeX/cache/ > + > +If that directory is not present, then either the memory does not have > +a side cache, or that information is not provided to the kernel. > + > +The attributes for each level of cache is provided under its cache > +level index:: > + > + /sys/devices/system/node/nodeX/cache/indexA/ > + /sys/devices/system/node/nodeX/cache/indexB/ > + /sys/devices/system/node/nodeX/cache/indexC/ > + > +Each cache level's directory provides its attributes. For example, > +the following is a single cache level and the attributes available for > +software to query:: > + > + # tree sys/devices/system/node/node0/cache/ > + /sys/devices/system/node/node0/cache/ > + |-- index1 > + | |-- associativity > + | |-- level > + | |-- line_size > + | |-- size > + | `-- write_policy > + > +The cache "associativity" will be 0 if it is a direct-mapped cache, and > +non-zero for any other indexed based, multi-way associativity. > + > +The "level" is the distance from the far memory, and matches the number > +appended to its "index" directory. > + > +The "line_size" is the number of bytes accessed on a cache miss. > + > +The "size" is the number of bytes provided by this cache level. > + > +The "write_policy" will be 0 for write-back, and non-zero for > +write-through caching. > + > +[1] https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf > -- > 2.14.4 >
diff --git a/Documentation/vm/numacache.rst b/Documentation/vm/numacache.rst new file mode 100644 index 000000000000..e79c801b7e3b --- /dev/null +++ b/Documentation/vm/numacache.rst @@ -0,0 +1,76 @@ +.. _numacache: + +========== +NUMA Cache +========== + +System memory may be constructed in a hierarchy of various performing +characteristics in order to provide large address space of slower +performing memory cached by a smaller size of higher performing +memory. The system physical addresses that software is aware of see +is provided by the last memory level in the hierarchy, while higher +performing memory transparently provides caching to slower levels. + +The term "far memory" is used to denote the last level memory in the +hierarchy. Each increasing cache level provides higher performing CPU +access, and the term "near memory" represents the highest level cache +provided by the system. This number is different than CPU caches where +the cache level (ex: L1, L2, L3) uses a CPU centric view with each level +being lower performing and closer to system memory. The memory cache +level is centric to the last level memory, so the higher numbered cache +level denotes memory nearer to the CPU, and further from far memory. + +The memory side caches are not directly addressable by software. When +software accesses a system address, the system will return it from the +near memory cache if it is present. If it is not present, the system +accesses the next level of memory until there is either a hit in that +cache level, or it reaches far memory. + +In order to maximize the performance out of such a setup, software may +wish to query the memory cache attributes. If the system provides a way +to query this information, for example with ACPI HMAT (Heterogeneous +Memory Attribute Table)[1], the kernel will append these attributes to +the NUMA node that provides the memory. + +When the kernel first registers a memory cache with a node, the kernel +will create the following directory:: + + /sys/devices/system/node/nodeX/cache/ + +If that directory is not present, then either the memory does not have +a side cache, or that information is not provided to the kernel. + +The attributes for each level of cache is provided under its cache +level index:: + + /sys/devices/system/node/nodeX/cache/indexA/ + /sys/devices/system/node/nodeX/cache/indexB/ + /sys/devices/system/node/nodeX/cache/indexC/ + +Each cache level's directory provides its attributes. For example, +the following is a single cache level and the attributes available for +software to query:: + + # tree sys/devices/system/node/node0/cache/ + /sys/devices/system/node/node0/cache/ + |-- index1 + | |-- associativity + | |-- level + | |-- line_size + | |-- size + | `-- write_policy + +The cache "associativity" will be 0 if it is a direct-mapped cache, and +non-zero for any other indexed based, multi-way associativity. + +The "level" is the distance from the far memory, and matches the number +appended to its "index" directory. + +The "line_size" is the number of bytes accessed on a cache miss. + +The "size" is the number of bytes provided by this cache level. + +The "write_policy" will be 0 for write-back, and non-zero for +write-through caching. + +[1] https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Platforms may provide system memory that contains side caches to help spped up access. These memory caches are part of a memory node and the cache attributes are exported by the kernel. Add new documentation providing a brief overview of system memory side caches and the kernel provided attributes for application optimization. Signed-off-by: Keith Busch <keith.busch@intel.com> --- Documentation/vm/numacache.rst | 76 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/vm/numacache.rst