| Message ID | 20200519222409.616078-1-srinivas.pandruvada@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | ACPI / DPTF: Add additional attributes to power participant driver | expand |
powerOn Wed, May 20, 2020 at 12:24 AM Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> wrote: > > Add two additional attributes to the existing power participant driver: > rest_of_platform_power_mw: (RO) Shows the rest of worst case platform > power in mW. It would be good to explain or at least give an example of what the "rest of worst case platform power" can be. > prochot_confirm: (WO) Confirm EC about a prochot notification. > > Also userspace is notified via sysfs_notify(), whenever power source or > rest of the platform power is changed. So user space can use poll() > system call on those attributes. > > The ACPI methods used in this patch are as follows: > > PROP > This object evaluates to the rest of worst case platform power in mW. > Bits: > 23:0 Worst case rest of platform power in mW. > > PBOK > PBOK is a method designed to provide a mechanism for OSPM to change power > setting before EC can de-assert a PROCHOT from a device. The EC may > receive several PROCHOTs, so it has a sequence number attached to PSRC > (read via existing attribute "platform_power_source"). Once OSPM takes > action for a PSRC change notification, it can call PBOK method to confirm > with the sequence number. > Bits: > 3:0 Power Delivery State Change Sequence number > 30 Reserved > 31 0 – Not OK to de-assert PROCHOT > 1 – OK to de-assert PROCHOT > > PSRC (Platform Power Source): Not new in this patch but for > documentation for new bits > This object evaluates to an integer that represents the system power > source as well as the power delivery state change sequence number. > Bits: > 3:0 The current power source as an integer for AC, DC, USB, Wireless. > 0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging > 7:4 Power Delivery State Change Sequence Number. Default value is 0 > > Notifications: > 0x81: (Power State Change) Used to notify when the power source has > changed. > 0x84: (PROP change) Used to notify when the platform rest of power has > changed. > > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > --- > Documentation/ABI/testing/sysfs-platform-dptf | 24 +++++-- > drivers/acpi/dptf/dptf_power.c | 69 ++++++++++++++++++- > 2 files changed, 88 insertions(+), 5 deletions(-) > > diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf > index 325dc0667dbb..cf4eb5d676de 100644 > --- a/Documentation/ABI/testing/sysfs-platform-dptf > +++ b/Documentation/ABI/testing/sysfs-platform-dptf > @@ -27,10 +27,12 @@ KernelVersion: v4.10 > Contact: linux-acpi@vger.kernel.org > Description: > (RO) Display the platform power source > - 0x00 = DC > - 0x01 = AC > - 0x02 = USB > - 0x03 = Wireless Charger > + bits[3:0] Current power source > + 0x00 = DC > + 0x01 = AC > + 0x02 = USB > + 0x03 = Wireless Charger > + bits[7:4] Power source sequence number > > What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power > Date: Jul, 2016 > @@ -38,3 +40,17 @@ KernelVersion: v4.10 > Contact: linux-acpi@vger.kernel.org > Description: > (RO) The maximum sustained power for battery in milliwatts. > + > +What: /sys/bus/platform/devices/INT3407:00/dptf_power/rest_of_platform_power_mw > +Date: June, 2020 > +KernelVersion: v5.8 > +Contact: linux-acpi@vger.kernel.org > +Description: > + (RO) Shows the rest of worst case platform power in mW. > + > +What: /sys/bus/platform/devices/INT3407:00/dptf_power/prochot_confirm > +Date: June, 2020 > +KernelVersion: v5.8 > +Contact: linux-acpi@vger.kernel.org > +Description: > + (WO) Confirm embedded controller about a prochot notification. > diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c > index e4e8b75d39f0..abe99039af74 100644 > --- a/drivers/acpi/dptf/dptf_power.c > +++ b/drivers/acpi/dptf/dptf_power.c > @@ -16,6 +16,7 @@ > * ARTG : Adapter rating > * CTYP : Charger type > * PBSS : Battery steady power > + * PROP : Rest of worst case platform Power > */ > #define DPTF_POWER_SHOW(name, object) \ > static ssize_t name##_show(struct device *dev,\ > @@ -39,12 +40,34 @@ DPTF_POWER_SHOW(platform_power_source, PSRC) > DPTF_POWER_SHOW(adapter_rating_mw, ARTG) > DPTF_POWER_SHOW(battery_steady_power_mw, PBSS) > DPTF_POWER_SHOW(charger_type, CTYP) > +DPTF_POWER_SHOW(rest_of_platform_power_mw, PROP) > > static DEVICE_ATTR_RO(max_platform_power_mw); > static DEVICE_ATTR_RO(platform_power_source); > static DEVICE_ATTR_RO(adapter_rating_mw); > static DEVICE_ATTR_RO(battery_steady_power_mw); > static DEVICE_ATTR_RO(charger_type); > +static DEVICE_ATTR_RO(rest_of_platform_power_mw); > + > +static ssize_t prochot_confirm_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct acpi_device *acpi_dev = dev_get_drvdata(dev); > + acpi_status status; > + int seq_no; > + > + if (kstrtouint(buf, 0, &seq_no) < 0) > + return -EINVAL; > + > + status = acpi_execute_simple_method(acpi_dev->handle, "PBOK", seq_no); > + if (ACPI_SUCCESS(status)) > + return count; > + > + return -EINVAL; > +} > + > +static DEVICE_ATTR_WO(prochot_confirm); > > static struct attribute *dptf_power_attrs[] = { > &dev_attr_max_platform_power_mw.attr, > @@ -52,6 +75,8 @@ static struct attribute *dptf_power_attrs[] = { > &dev_attr_adapter_rating_mw.attr, > &dev_attr_battery_steady_power_mw.attr, > &dev_attr_charger_type.attr, > + &dev_attr_rest_of_platform_power_mw.attr, > + &dev_attr_prochot_confirm.attr, > NULL > }; > > @@ -60,6 +85,33 @@ static const struct attribute_group dptf_power_attribute_group = { > .name = "dptf_power" > }; > > +#define POWER_STATE_CHANGED 0x81 > +#define POWER_PROP_CHANGE_EVENT 0x84 > + > +static void dptf_power_notify(acpi_handle handle, u32 event, void *data) > +{ > + struct platform_device *pdev = data; > + char *attr; > + > + switch (event) { > + case POWER_STATE_CHANGED: > + attr = "platform_power_source"; > + break; > + case POWER_PROP_CHANGE_EVENT: > + attr = "rest_of_platform_power_mw"; > + break; > + default: > + dev_err(&pdev->dev, "Unsupported event [0x%x]\n", event); > + return; > + } > + > + /* > + * Notify that an attribute is changed, so that user space can read > + * again. > + */ > + sysfs_notify(&pdev->dev.kobj, "dptf_power", attr); > +} > + > static int dptf_power_add(struct platform_device *pdev) > { > struct acpi_device *acpi_dev; > @@ -78,10 +130,21 @@ static int dptf_power_add(struct platform_device *pdev) > if (ptype != 0x11) > return -ENODEV; > > + result = acpi_install_notify_handler(acpi_dev->handle, > + ACPI_DEVICE_NOTIFY, > + dptf_power_notify, > + (void *)pdev); > + if (result) > + return result; > + > result = sysfs_create_group(&pdev->dev.kobj, > &dptf_power_attribute_group); > - if (result) > + if (result) { > + acpi_remove_notify_handler(acpi_dev->handle, > + ACPI_DEVICE_NOTIFY, > + dptf_power_notify); > return result; > + } > > platform_set_drvdata(pdev, acpi_dev); > > @@ -90,7 +153,11 @@ static int dptf_power_add(struct platform_device *pdev) > > static int dptf_power_remove(struct platform_device *pdev) > { > + struct acpi_device *acpi_dev = platform_get_drvdata(pdev); > > + acpi_remove_notify_handler(acpi_dev->handle, > + ACPI_DEVICE_NOTIFY, > + dptf_power_notify); > sysfs_remove_group(&pdev->dev.kobj, &dptf_power_attribute_group); > > return 0; > -- > 2.25.4 >
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf index 325dc0667dbb..cf4eb5d676de 100644 --- a/Documentation/ABI/testing/sysfs-platform-dptf +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -27,10 +27,12 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Display the platform power source - 0x00 = DC - 0x01 = AC - 0x02 = USB - 0x03 = Wireless Charger + bits[3:0] Current power source + 0x00 = DC + 0x01 = AC + 0x02 = USB + 0x03 = Wireless Charger + bits[7:4] Power source sequence number What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power Date: Jul, 2016 @@ -38,3 +40,17 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) The maximum sustained power for battery in milliwatts. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/rest_of_platform_power_mw +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Shows the rest of worst case platform power in mW. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/prochot_confirm +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (WO) Confirm embedded controller about a prochot notification. diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c index e4e8b75d39f0..abe99039af74 100644 --- a/drivers/acpi/dptf/dptf_power.c +++ b/drivers/acpi/dptf/dptf_power.c @@ -16,6 +16,7 @@ * ARTG : Adapter rating * CTYP : Charger type * PBSS : Battery steady power + * PROP : Rest of worst case platform Power */ #define DPTF_POWER_SHOW(name, object) \ static ssize_t name##_show(struct device *dev,\ @@ -39,12 +40,34 @@ DPTF_POWER_SHOW(platform_power_source, PSRC) DPTF_POWER_SHOW(adapter_rating_mw, ARTG) DPTF_POWER_SHOW(battery_steady_power_mw, PBSS) DPTF_POWER_SHOW(charger_type, CTYP) +DPTF_POWER_SHOW(rest_of_platform_power_mw, PROP) static DEVICE_ATTR_RO(max_platform_power_mw); static DEVICE_ATTR_RO(platform_power_source); static DEVICE_ATTR_RO(adapter_rating_mw); static DEVICE_ATTR_RO(battery_steady_power_mw); static DEVICE_ATTR_RO(charger_type); +static DEVICE_ATTR_RO(rest_of_platform_power_mw); + +static ssize_t prochot_confirm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acpi_device *acpi_dev = dev_get_drvdata(dev); + acpi_status status; + int seq_no; + + if (kstrtouint(buf, 0, &seq_no) < 0) + return -EINVAL; + + status = acpi_execute_simple_method(acpi_dev->handle, "PBOK", seq_no); + if (ACPI_SUCCESS(status)) + return count; + + return -EINVAL; +} + +static DEVICE_ATTR_WO(prochot_confirm); static struct attribute *dptf_power_attrs[] = { &dev_attr_max_platform_power_mw.attr, @@ -52,6 +75,8 @@ static struct attribute *dptf_power_attrs[] = { &dev_attr_adapter_rating_mw.attr, &dev_attr_battery_steady_power_mw.attr, &dev_attr_charger_type.attr, + &dev_attr_rest_of_platform_power_mw.attr, + &dev_attr_prochot_confirm.attr, NULL }; @@ -60,6 +85,33 @@ static const struct attribute_group dptf_power_attribute_group = { .name = "dptf_power" }; +#define POWER_STATE_CHANGED 0x81 +#define POWER_PROP_CHANGE_EVENT 0x84 + +static void dptf_power_notify(acpi_handle handle, u32 event, void *data) +{ + struct platform_device *pdev = data; + char *attr; + + switch (event) { + case POWER_STATE_CHANGED: + attr = "platform_power_source"; + break; + case POWER_PROP_CHANGE_EVENT: + attr = "rest_of_platform_power_mw"; + break; + default: + dev_err(&pdev->dev, "Unsupported event [0x%x]\n", event); + return; + } + + /* + * Notify that an attribute is changed, so that user space can read + * again. + */ + sysfs_notify(&pdev->dev.kobj, "dptf_power", attr); +} + static int dptf_power_add(struct platform_device *pdev) { struct acpi_device *acpi_dev; @@ -78,10 +130,21 @@ static int dptf_power_add(struct platform_device *pdev) if (ptype != 0x11) return -ENODEV; + result = acpi_install_notify_handler(acpi_dev->handle, + ACPI_DEVICE_NOTIFY, + dptf_power_notify, + (void *)pdev); + if (result) + return result; + result = sysfs_create_group(&pdev->dev.kobj, &dptf_power_attribute_group); - if (result) + if (result) { + acpi_remove_notify_handler(acpi_dev->handle, + ACPI_DEVICE_NOTIFY, + dptf_power_notify); return result; + } platform_set_drvdata(pdev, acpi_dev); @@ -90,7 +153,11 @@ static int dptf_power_add(struct platform_device *pdev) static int dptf_power_remove(struct platform_device *pdev) { + struct acpi_device *acpi_dev = platform_get_drvdata(pdev); + acpi_remove_notify_handler(acpi_dev->handle, + ACPI_DEVICE_NOTIFY, + dptf_power_notify); sysfs_remove_group(&pdev->dev.kobj, &dptf_power_attribute_group); return 0;
Add two additional attributes to the existing power participant driver: rest_of_platform_power_mw: (RO) Shows the rest of worst case platform power in mW. prochot_confirm: (WO) Confirm EC about a prochot notification. Also userspace is notified via sysfs_notify(), whenever power source or rest of the platform power is changed. So user space can use poll() system call on those attributes. The ACPI methods used in this patch are as follows: PROP This object evaluates to the rest of worst case platform power in mW. Bits: 23:0 Worst case rest of platform power in mW. PBOK PBOK is a method designed to provide a mechanism for OSPM to change power setting before EC can de-assert a PROCHOT from a device. The EC may receive several PROCHOTs, so it has a sequence number attached to PSRC (read via existing attribute "platform_power_source"). Once OSPM takes action for a PSRC change notification, it can call PBOK method to confirm with the sequence number. Bits: 3:0 Power Delivery State Change Sequence number 30 Reserved 31 0 – Not OK to de-assert PROCHOT 1 – OK to de-assert PROCHOT PSRC (Platform Power Source): Not new in this patch but for documentation for new bits This object evaluates to an integer that represents the system power source as well as the power delivery state change sequence number. Bits: 3:0 The current power source as an integer for AC, DC, USB, Wireless. 0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging 7:4 Power Delivery State Change Sequence Number. Default value is 0 Notifications: 0x81: (Power State Change) Used to notify when the power source has changed. 0x84: (PROP change) Used to notify when the platform rest of power has changed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> --- Documentation/ABI/testing/sysfs-platform-dptf | 24 +++++-- drivers/acpi/dptf/dptf_power.c | 69 ++++++++++++++++++- 2 files changed, 88 insertions(+), 5 deletions(-)