From patchwork Thu Sep 10 05:40:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Hellwig X-Patchwork-Id: 11766639 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2CA84112E for ; Thu, 10 Sep 2020 05:41:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 064F320731 for ; Thu, 10 Sep 2020 05:41:58 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=infradead.org header.i=@infradead.org header.b="dGjgEckE" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728363AbgIJFl4 (ORCPT ); Thu, 10 Sep 2020 01:41:56 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58362 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725913AbgIJFkz (ORCPT ); Thu, 10 Sep 2020 01:40:55 -0400 Received: from casper.infradead.org (casper.infradead.org [IPv6:2001:8b0:10b:1236::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D057FC0613ED; Wed, 9 Sep 2020 22:40:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=casper.20170209; h=Content-Transfer-Encoding:MIME-Version: References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From:Sender:Reply-To: Content-Type:Content-ID:Content-Description; bh=KowqMdTwIY6z/2j6fNj4uxDzXTUnWQmL1uTbgsHA36A=; b=dGjgEckEvGFXoyeXPjIK/VLZBo CKH9tj6WoJG+5BKNviD81HHv3Ki18PazjMRmPOAOQGwEgdKUZejT8KBxsVWmtuEKwber5ZXvTfwX/ yPZdddaChbbD55nIXrZgQWjIj6fadNDnOvIZbo2VFKRU22V77XFFvA7xK7u1IdQmxyR+mwSZiPZaW J3rnlcoEjhcORx81yBj3s69n+rLp/d/NxGGxpcEEJbaThgOFozRKmxEKIBmNYGLHYKXwtOuEgeLOB oNN/zFMwfw2ZxM7qVNb86z0cJXyD6jL1cBJ/w6XXgY5sVZ+AaQ3UbG6K49mVKaXrG/TW98sKme+C4 qwjby5FQ==; Received: from [2001:4bb8:184:af1:d8d0:3027:a666:4c4e] (helo=localhost) by casper.infradead.org with esmtpsa (Exim 4.92.3 #3 (Red Hat Linux)) id 1kGFK7-0001u6-SO; Thu, 10 Sep 2020 05:40:44 +0000 From: Christoph Hellwig To: iommu@lists.linux-foundation.org, Russell King , Santosh Shilimkar Cc: Jim Quinlan , Nathan Chancellor , Florian Fainelli , Robin Murphy , Rob Herring , Frank Rowand , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org, linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH 3/3] dma-mapping: introduce DMA range map, supplanting dma_pfn_offset Date: Thu, 10 Sep 2020 07:40:38 +0200 Message-Id: <20200910054038.324517-4-hch@lst.de> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200910054038.324517-1-hch@lst.de> References: <20200910054038.324517-1-hch@lst.de> MIME-Version: 1.0 X-SRS-Rewrite: SMTP reverse-path rewritten from by casper.infradead.org. See http://www.infradead.org/rpr.html Sender: linux-acpi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org From: Jim Quinlan The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_attach_offset_range(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan [hch: various interface cleanups] Signed-off-by: Christoph Hellwig Tested-by: Nathan Chancellor Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy --- arch/arm/include/asm/dma-direct.h | 9 +-- arch/arm/mach-keystone/keystone.c | 17 ++-- arch/sh/drivers/pci/pcie-sh7786.c | 9 ++- arch/x86/pci/sta2x11-fixup.c | 6 +- drivers/acpi/arm64/iort.c | 6 +- drivers/base/core.c | 2 + drivers/gpu/drm/sun4i/sun4i_backend.c | 8 +- drivers/iommu/io-pgtable-arm.c | 2 +- .../platform/sunxi/sun4i-csi/sun4i_csi.c | 9 ++- .../platform/sunxi/sun6i-csi/sun6i_csi.c | 11 ++- drivers/of/address.c | 73 ++++++++--------- drivers/of/device.c | 44 ++++++---- drivers/of/of_private.h | 11 +-- drivers/of/unittest.c | 34 +++++--- drivers/remoteproc/remoteproc_core.c | 4 +- .../staging/media/sunxi/cedrus/cedrus_hw.c | 10 ++- drivers/usb/core/message.c | 5 +- drivers/usb/core/usb.c | 3 +- include/linux/device.h | 4 +- include/linux/dma-direct.h | 52 ++++++++++-- include/linux/dma-mapping.h | 19 ++++- kernel/dma/coherent.c | 7 +- kernel/dma/direct.c | 81 ++++++++++++++++++- 23 files changed, 303 insertions(+), 123 deletions(-) diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h index de0f4ff9279615..a443d5257a21ed 100644 --- a/arch/arm/include/asm/dma-direct.h +++ b/arch/arm/include/asm/dma-direct.h @@ -16,8 +16,8 @@ #ifndef __arch_pfn_to_dma static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) { - if (dev) - pfn -= dev->dma_pfn_offset; + if (dev && dev->dma_range_map) + pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn))); return (dma_addr_t)__pfn_to_bus(pfn); } @@ -25,9 +25,8 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) { unsigned long pfn = __bus_to_pfn(addr); - if (dev) - pfn += dev->dma_pfn_offset; - + if (dev && dev->dma_range_map) + pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn))); return pfn; } diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index dcd031ba84c2e0..09a65c2dfd7327 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -8,6 +8,7 @@ */ #include #include +#include #include #include #include @@ -25,8 +26,6 @@ #include "keystone.h" #ifdef CONFIG_ARM_LPAE -static unsigned long keystone_dma_pfn_offset __read_mostly; - static int keystone_platform_notifier(struct notifier_block *nb, unsigned long event, void *data) { @@ -39,9 +38,12 @@ static int keystone_platform_notifier(struct notifier_block *nb, return NOTIFY_BAD; if (!dev->of_node) { - dev->dma_pfn_offset = keystone_dma_pfn_offset; - dev_err(dev, "set dma_pfn_offset%08lx\n", - dev->dma_pfn_offset); + int ret = dma_direct_set_offset(dev, KEYSTONE_HIGH_PHYS_START, + KEYSTONE_LOW_PHYS_START, + KEYSTONE_HIGH_PHYS_SIZE); + dev_err(dev, "set dma_offset%08llx%s\n", + KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START, + ret ? " failed" : ""); } return NOTIFY_OK; } @@ -54,11 +56,8 @@ static struct notifier_block platform_nb = { static void __init keystone_init(void) { #ifdef CONFIG_ARM_LPAE - if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) { - keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - - KEYSTONE_LOW_PHYS_START); + if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) bus_register_notifier(&platform_bus_type, &platform_nb); - } #endif keystone_pm_runtime_init(); } diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index e0b568aaa7014c..4468289ab2cac7 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -31,6 +32,8 @@ struct sh7786_pcie_port { static struct sh7786_pcie_port *sh7786_pcie_ports; static unsigned int nr_ports; static unsigned long dma_pfn_offset; +size_t memsize; +u64 memstart; static struct sh7786_pcie_hwops { int (*core_init)(void); @@ -301,7 +304,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) struct pci_channel *chan = port->hose; unsigned int data; phys_addr_t memstart, memend; - size_t memsize; int ret, i, win; /* Begin initialization */ @@ -368,8 +370,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) memstart = ALIGN_DOWN(memstart, memsize); memsize = roundup_pow_of_two(memend - memstart); - dma_pfn_offset = memstart >> PAGE_SHIFT; - /* * If there's more than 512MB of memory, we need to roll over to * LAR1/LAMR1. @@ -487,7 +487,8 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) void pcibios_bus_add_device(struct pci_dev *pdev) { - pdev->dev.dma_pfn_offset = dma_pfn_offset; + dma_direct_set_offset(&pdev->dev, __pa(memory_start), + __pa(memory_start) - memstart, memsize); } static int __init sh7786_pcie_core_init(void) diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c index c313d784efabb9..324a207f99956b 100644 --- a/arch/x86/pci/sta2x11-fixup.c +++ b/arch/x86/pci/sta2x11-fixup.c @@ -133,7 +133,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev) struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); struct device *dev = &pdev->dev; u32 amba_base, max_amba_addr; - int i; + int i, ret; if (!instance) return; @@ -141,7 +141,9 @@ static void sta2x11_map_ep(struct pci_dev *pdev) pci_read_config_dword(pdev, AHB_BASE(0), &amba_base); max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1; - dev->dma_pfn_offset = PFN_DOWN(-amba_base); + ret = dma_direct_set_offset(dev, 0, amba_base, STA2X11_AMBA_SIZE); + if (ret) + dev_err(dev, "sta2x11: could not set DMA offset\n"); dev->bus_dma_limit = max_amba_addr; pci_set_consistent_dma_mask(pdev, max_amba_addr); diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index ec782e4a0fe419..de18c07ca02cc4 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -18,6 +18,7 @@ #include #include #include +#include #define IORT_TYPE_MASK(type) (1 << (type)) #define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP) @@ -1184,8 +1185,9 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) *dma_addr = dmaaddr; *dma_size = size; - dev->dma_pfn_offset = PFN_DOWN(offset); - dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset); + ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size); + + dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : ""); } static void __init acpi_iort_register_irq(int hwirq, const char *name, diff --git a/drivers/base/core.c b/drivers/base/core.c index f6f620aa94086d..b893056e39459c 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1792,6 +1792,8 @@ static void device_release(struct kobject *kobj) */ devres_release_all(dev); + kfree(dev->dma_range_map); + if (dev->release) dev->release(dev); else if (dev->type && dev->type->release) diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index 072ea113e6be55..05e9f0d28196d9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -811,8 +812,13 @@ static int sun4i_backend_bind(struct device *dev, struct device *master, * because of an old DT, we need to set the DMA offset by hand * on our device since the RAM mapping is at 0 for the DMA bus, * unlike the CPU. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. */ - drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + ret = dma_direct_set_offset(drm->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; } backend->engine.node = dev->of_node; diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c index dc7bcf858b6d2d..d77e881516a4ab 100644 --- a/drivers/iommu/io-pgtable-arm.c +++ b/drivers/iommu/io-pgtable-arm.c @@ -751,7 +751,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg) if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS) return NULL; - if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) { + if (!selftest_running && cfg->iommu_dev->dma_range_map) { dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n"); return NULL; } diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c index 5319eb1ab30927..307997ee7f96a2 100644 --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -182,8 +183,14 @@ static int sun4i_csi_probe(struct platform_device *pdev) if (ret) return ret; } else { + /* + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. + */ #ifdef PHYS_PFN_OFFSET - csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + ret = dma_direct_set_offset(csi->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; #endif } diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c index 28e89340fed981..e69e14379fc6e4 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c @@ -899,8 +899,15 @@ static int sun6i_csi_probe(struct platform_device *pdev) return -ENOMEM; sdev->dev = &pdev->dev; - /* The DMA bus has the memory mapped at 0 */ - sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT; + /* + * The DMA bus has the memory mapped at 0. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. + */ + ret = dma_direct_set_offset(sdev->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; ret = sun6i_csi_resource_request(sdev, pdev); if (ret) diff --git a/drivers/of/address.c b/drivers/of/address.c index da4f7341323f22..a49ef87aaaf21c 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -13,6 +13,7 @@ #include #include #include +#include /* for bus_dma_region */ #include "of_private.h" @@ -937,33 +938,33 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index, } EXPORT_SYMBOL(of_io_request_and_map); +#ifdef CONFIG_HAS_DMA /** - * of_dma_get_range - Get DMA range info + * of_dma_get_range - Get DMA range info and put it into a map array * @np: device node to get DMA range info - * @dma_addr: pointer to store initial DMA address of DMA range - * @paddr: pointer to store initial CPU address of DMA range - * @size: pointer to store size of DMA range + * @map: dma range structure to return * * Look in bottom up direction for the first "dma-ranges" property - * and parse it. - * dma-ranges format: + * and parse it. Put the information into a DMA offset map array. + * + * dma-ranges format: * DMA addr (dma_addr) : naddr cells * CPU addr (phys_addr_t) : pna cells * size : nsize cells * - * It returns -ENODEV if "dma-ranges" property was not found - * for this device in DT. + * It returns -ENODEV if "dma-ranges" property was not found for this + * device in the DT. */ -int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size) +int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) { struct device_node *node = of_node_get(np); const __be32 *ranges = NULL; - int len; - int ret = 0; bool found_dma_ranges = false; struct of_range_parser parser; struct of_range range; - u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0; + struct bus_dma_region *r; + int len, num_ranges = 0; + int ret = 0; while (node) { ranges = of_get_property(node, "dma-ranges", &len); @@ -989,49 +990,39 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz } of_dma_range_parser_init(&parser, node); + for_each_of_range(&parser, &range) + num_ranges++; + + r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL); + if (!r) { + ret = -ENOMEM; + goto out; + } + /* + * Record all info in the generic DMA ranges array for struct device. + */ + *map = r; + of_dma_range_parser_init(&parser, node); for_each_of_range(&parser, &range) { pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", range.bus_addr, range.cpu_addr, range.size); - - if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) { - pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node); - /* Don't error out as we'd break some existing DTs */ - continue; - } if (range.cpu_addr == OF_BAD_ADDR) { pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n", range.bus_addr, node); continue; } - dma_offset = range.cpu_addr - range.bus_addr; - - /* Take lower and upper limits */ - if (range.bus_addr < dma_start) - dma_start = range.bus_addr; - if (range.bus_addr + range.size > dma_end) - dma_end = range.bus_addr + range.size; - } - - if (dma_start >= dma_end) { - ret = -EINVAL; - pr_debug("Invalid DMA ranges configuration on node(%pOF)\n", - node); - goto out; + r->cpu_start = range.cpu_addr; + r->dma_start = range.bus_addr; + r->size = range.size; + r->offset = range.cpu_addr - range.bus_addr; + r++; } - - *dma_addr = dma_start; - *size = dma_end - dma_start; - *paddr = dma_start + dma_offset; - - pr_debug("final: dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", - *dma_addr, *paddr, *size); - out: of_node_put(node); - return ret; } +#endif /* CONFIG_HAS_DMA */ /** * of_dma_is_coherent - Check if device is coherent diff --git a/drivers/of/device.c b/drivers/of/device.c index b439c1e054349b..6e3ae7ebc33eeb 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -5,7 +5,7 @@ #include #include #include -#include +#include /* for bus_dma_region */ #include #include #include @@ -90,14 +90,14 @@ int of_device_add(struct platform_device *ofdev) int of_dma_configure_id(struct device *dev, struct device_node *np, bool force_dma, const u32 *id) { - u64 dma_addr, paddr, size = 0; - int ret; - bool coherent; - unsigned long offset; const struct iommu_ops *iommu; - u64 mask, end; + const struct bus_dma_region *map = NULL; + dma_addr_t dma_start = 0; + u64 mask, end, size = 0; + bool coherent; + int ret; - ret = of_dma_get_range(np, &dma_addr, &paddr, &size); + ret = of_dma_get_range(np, &map); if (ret < 0) { /* * For legacy reasons, we have to assume some devices need @@ -106,26 +106,35 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, */ if (!force_dma) return ret == -ENODEV ? 0 : ret; - - dma_addr = offset = 0; } else { - offset = PFN_DOWN(paddr - dma_addr); + const struct bus_dma_region *r = map; + dma_addr_t dma_end = 0; + + /* Determine the overall bounds of all DMA regions */ + for (dma_start = ~(dma_addr_t)0; r->size; r++) { + /* Take lower and upper limits */ + if (r->dma_start < dma_start) + dma_start = r->dma_start; + if (r->dma_start + r->size > dma_end) + dma_end = r->dma_start + r->size; + } + size = dma_end - dma_start; /* * Add a work around to treat the size as mask + 1 in case * it is defined in DT as a mask. */ if (size & 1) { - dev_warn(dev, "Invalid size 0x%llx for dma-range\n", + dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n", size); size = size + 1; } if (!size) { dev_err(dev, "Adjusted size 0x%llx invalid\n", size); + kfree(map); return -EINVAL; } - dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); } /* @@ -144,13 +153,11 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, else if (!size) size = 1ULL << 32; - dev->dma_pfn_offset = offset; - /* * Limit coherent and dma mask based on size and default mask * set by the driver. */ - end = dma_addr + size - 1; + end = dma_start + size - 1; mask = DMA_BIT_MASK(ilog2(end) + 1); dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; @@ -163,14 +170,17 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, coherent ? " " : " not "); iommu = of_iommu_configure(dev, np, id); - if (PTR_ERR(iommu) == -EPROBE_DEFER) + if (PTR_ERR(iommu) == -EPROBE_DEFER) { + kfree(map); return -EPROBE_DEFER; + } dev_dbg(dev, "device is%sbehind an iommu\n", iommu ? " " : " not "); - arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); + arch_setup_dma_ops(dev, dma_start, size, iommu, coherent); + dev->dma_range_map = map; return 0; } EXPORT_SYMBOL_GPL(of_dma_configure_id); diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index edc682249c0015..d9e6a324de0a77 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -157,12 +157,13 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np, extern int of_bus_n_addr_cells(struct device_node *np); extern int of_bus_n_size_cells(struct device_node *np); -#ifdef CONFIG_OF_ADDRESS -extern int of_dma_get_range(struct device_node *np, u64 *dma_addr, - u64 *paddr, u64 *size); +struct bus_dma_region; +#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA) +int of_dma_get_range(struct device_node *np, + const struct bus_dma_region **map); #else -static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr, - u64 *paddr, u64 *size) +static inline int of_dma_get_range(struct device_node *np, + const struct bus_dma_region **map) { return -ENODEV; } diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 9b7e84bdc7d446..06cc988faf78b3 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -7,6 +7,7 @@ #include #include +#include /* to test phys_to_dma/dma_to_phys */ #include #include #include @@ -869,10 +870,11 @@ static void __init of_unittest_changeset(void) } static void __init of_unittest_dma_ranges_one(const char *path, - u64 expect_dma_addr, u64 expect_paddr, u64 expect_size) + u64 expect_dma_addr, u64 expect_paddr) { +#ifdef CONFIG_HAS_DMA struct device_node *np; - u64 dma_addr, paddr, size; + const struct bus_dma_region *map = NULL; int rc; np = of_find_node_by_path(path); @@ -881,28 +883,40 @@ static void __init of_unittest_dma_ranges_one(const char *path, return; } - rc = of_dma_get_range(np, &dma_addr, &paddr, &size); + rc = of_dma_get_range(np, &map); unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc); + if (!rc) { - unittest(size == expect_size, - "of_dma_get_range wrong size on node %pOF size=%llx\n", np, size); + phys_addr_t paddr; + dma_addr_t dma_addr; + struct device dev_bogus; + + dev_bogus.dma_range_map = map; + paddr = dma_to_phys(&dev_bogus, expect_dma_addr); + dma_addr = phys_to_dma(&dev_bogus, expect_paddr); + unittest(paddr == expect_paddr, - "of_dma_get_range wrong phys addr (%llx) on node %pOF", paddr, np); + "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", + &paddr, expect_paddr, np); unittest(dma_addr == expect_dma_addr, - "of_dma_get_range wrong DMA addr (%llx) on node %pOF", dma_addr, np); + "of_dma_get_range: wrong DMA addr %pad (expecting %llx) on node %pOF\n", + &dma_addr, expect_dma_addr, np); + + kfree(map); } of_node_put(np); +#endif } static void __init of_unittest_parse_dma_ranges(void) { of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", - 0x0, 0x20000000, 0x40000000); + 0x0, 0x20000000); of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", - 0x100000000, 0x20000000, 0x2000000000); + 0x100000000, 0x20000000); of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", - 0x80000000, 0x20000000, 0x10000000); + 0x80000000, 0x20000000); } static void __init of_unittest_pci_dma_ranges(void) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 7f90eeea67e279..bc412fb164a3fe 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -529,7 +529,9 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, /* Initialise vdev subdevice */ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); rvdev->dev.parent = &rproc->dev; - rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset; + ret = dma_direct_copy_range_map(&rvdev->dev, rproc->dev.parent); + if (ret) + return ret; rvdev->dev.release = rproc_rvdev_release; dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); dev_set_drvdata(&rvdev->dev, rvdev); diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c index 1744e6fcc99980..bcf050a04ffc45 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c @@ -227,11 +227,17 @@ int cedrus_hw_probe(struct cedrus_dev *dev) * the RAM offset to the physcal addresses. * * This information will eventually be obtained from device-tree. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. */ #ifdef PHYS_PFN_OFFSET - if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) - dev->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) { + ret = dma_direct_set_offset(dev->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; + } #endif ret = of_reserved_mem_device_init(dev->dev); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 6197938dcc2d8f..935ee98e049f65 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1956,10 +1956,11 @@ int usb_set_configuration(struct usb_device *dev, int configuration) intf->dev.groups = usb_interface_groups; /* * Please refer to usb_alloc_dev() to see why we set - * dma_mask and dma_pfn_offset. + * dma_mask and dma_range_map. */ intf->dev.dma_mask = dev->dev.dma_mask; - intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset; + if (dma_direct_copy_range_map(&intf->dev, &dev->dev)) + dev_err(&dev->dev, "failed to copy DMA map\n"); INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); intf->minor = -1; device_initialize(&intf->dev); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index bafc113f2b3ef3..23d451f6894d70 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -610,7 +610,8 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, * mask for the entire HCD, so don't do that. */ dev->dev.dma_mask = bus->sysdev->dma_mask; - dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset; + if (dma_direct_copy_range_map(&dev->dev, bus->sysdev)) + dev_err(&dev->dev, "failed to copy DMA map\n"); set_dev_node(&dev->dev, dev_to_node(bus->sysdev)); dev->state = USB_STATE_ATTACHED; dev->lpm_disable_count = 1; diff --git a/include/linux/device.h b/include/linux/device.h index ca18da4768e3e8..1c78621fc3c01f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -466,7 +466,7 @@ struct dev_links_info { * such descriptors. * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller * DMA limit than the device itself supports. - * @dma_pfn_offset: offset of DMA memory range relatively of RAM + * @dma_range_map: map for DMA memory ranges relative to that of RAM * @dma_parms: A low level driver may set these to teach IOMMU code about * segment limitations. * @dma_pools: Dma pools (if dma'ble device). @@ -561,7 +561,7 @@ struct device { 64 bit addresses for consistent allocations such descriptors. */ u64 bus_dma_limit; /* upstream dma constraint */ - unsigned long dma_pfn_offset; + const struct bus_dma_region *dma_range_map; struct device_dma_parameters *dma_parms; diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h index 6e87225600ae35..715dcb7d64d5a4 100644 --- a/include/linux/dma-direct.h +++ b/include/linux/dma-direct.h @@ -14,21 +14,56 @@ extern unsigned int zone_dma_bits; +/* + * Record the mapping of CPU physical to DMA addresses for a given region. + */ +struct bus_dma_region { + phys_addr_t cpu_start; + dma_addr_t dma_start; + u64 size; + u64 offset; +}; + +static inline dma_addr_t translate_phys_to_dma(struct device *dev, + phys_addr_t paddr) +{ + const struct bus_dma_region *m; + + for (m = dev->dma_range_map; m->size; m++) + if (paddr >= m->cpu_start && paddr - m->cpu_start < m->size) + return (dma_addr_t)paddr - m->offset; + + /* make sure dma_capable fails when no translation is available */ + return DMA_MAPPING_ERROR; +} + +static inline phys_addr_t translate_dma_to_phys(struct device *dev, + dma_addr_t dma_addr) +{ + const struct bus_dma_region *m; + + for (m = dev->dma_range_map; m->size; m++) + if (dma_addr >= m->dma_start && dma_addr - m->dma_start < m->size) + return (phys_addr_t)dma_addr + m->offset; + + return 0; +} + #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA #include #else static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) { - dma_addr_t dev_addr = (dma_addr_t)paddr; - - return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); + if (dev->dma_range_map) + return translate_phys_to_dma(dev, paddr); + return paddr; } -static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr) +static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) { - phys_addr_t paddr = (phys_addr_t)dev_addr; - - return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); + if (dev->dma_range_map) + return translate_dma_to_phys(dev, dma_addr); + return dma_addr; } #endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */ @@ -64,7 +99,8 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size, if (!dev->dma_mask) return false; - + if (addr == DMA_MAPPING_ERROR) + return false; if (is_ram && !IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) && min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn))) return false; diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index df0bff2ea750e0..e8fcb19c9112f8 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -730,4 +730,21 @@ static inline int dma_mmap_wc(struct device *dev, #define dma_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif -#endif +/* + * These interfaces deal with the offset ranges for the direct mapping. + * Drivers really should not use them, but we have a few legacy cases + * that need them left. + */ +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, + dma_addr_t dma_start, u64 size); +#ifdef CONFIG_HAS_DMA +int dma_direct_copy_range_map(struct device *to, struct device *from); +#else +static inline int dma_direct_copy_range_map(struct device *to, + struct device *from) +{ + return 0; +} +#endif /* CONFIG_HAS_DMA */ + +#endif /* _LINUX_DMA_MAPPING_H */ diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c index 2a0c4985f38e41..029fdc3eb670ae 100644 --- a/kernel/dma/coherent.c +++ b/kernel/dma/coherent.c @@ -7,7 +7,7 @@ #include #include #include -#include +#include struct dma_coherent_mem { void *virt_base; @@ -32,9 +32,8 @@ static inline dma_addr_t dma_get_device_base(struct device *dev, struct dma_coherent_mem * mem) { if (mem->use_dev_dma_pfn_offset) - return (mem->pfn_base - dev->dma_pfn_offset) << PAGE_SHIFT; - else - return mem->device_base; + return phys_to_dma(dev, PFN_PHYS(mem->pfn_base)); + return mem->device_base; } static int dma_init_coherent_memory(phys_addr_t phys_addr, diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index db6ef07aec3b37..fc815f7375e282 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -13,6 +13,7 @@ #include #include #include +#include /* * Most architectures use ZONE_DMA for the first 16 Megabytes, but some use it @@ -70,8 +71,12 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size) { - return phys_to_dma_direct(dev, phys) + size - 1 <= - min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); + dma_addr_t dma_addr = phys_to_dma_direct(dev, phys); + + if (dma_addr == DMA_MAPPING_ERROR) + return false; + return dma_addr + size - 1 <= + min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); } /* @@ -476,3 +481,75 @@ bool dma_direct_need_sync(struct device *dev, dma_addr_t dma_addr) return !dev_is_dma_coherent(dev) || is_swiotlb_buffer(dma_to_phys(dev, dma_addr)); } + +/** + * dma_direct_set_offset - Assign scalar offset for a single DMA range. + * @dev: device pointer; needed to "own" the alloced memory. + * @cpu_start: beginning of memory region covered by this offset. + * @dma_start: beginning of DMA/PCI region covered by this offset. + * @size: size of the region. + * + * This is for the simple case of a uniform offset which cannot + * be discovered by "dma-ranges". + * + * It returns -ENOMEM if out of memory, -EINVAL if a map + * already exists, 0 otherwise. + * + * Note: any call to this from a driver is a bug. The mapping needs + * to be described by the device tree or other firmware interfaces. + */ +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, + dma_addr_t dma_start, u64 size) +{ + struct bus_dma_region *map; + u64 offset = (u64)cpu_start - (u64)dma_start; + + if (dev->dma_range_map) { + dev_err(dev, "attempt to add DMA range to existing map\n"); + return -EINVAL; + } + + if (!offset) + return 0; + + map = kcalloc(2, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + map[0].cpu_start = cpu_start; + map[0].dma_start = dma_start; + map[0].offset = offset; + map[0].size = size; + dev->dma_range_map = map; + + return 0; +} +EXPORT_SYMBOL_GPL(dma_direct_set_offset); + +/** + * dma_direct_copy_range_map - Copy the dma_range from one device to another + * @to: device to copy to + * @from: device to copy from + * + * Note: this should not be used in any new code. Drivers should never try + * to inherit DMA parameters from other devices but just use those other + * devices in the DMA mapping functions. + */ +int dma_direct_copy_range_map(struct device *to, struct device *from) +{ + const struct bus_dma_region *map = from->dma_range_map, *new_map, *r; + int num_ranges = 0; + + if (!map) + return 0; + + for (r = map; r->size; r++) + num_ranges++; + + new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)), + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + to->dma_range_map = new_map; + return 0; +} +EXPORT_SYMBOL_GPL(dma_direct_copy_range_map);