| Message ID | 20230203135043.409192-31-james.morse@arm.com (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
| Series | ACPI/arm64: add support for virtual cpuhotplug | expand |
Hi James, After Oliver Upton changes, I think we don't need most of the stuff in [Patch 29/32] and [Patch 30/32]. I have few questions related to the PSCI Version. Please scroll below. > From: James Morse <james.morse@arm.com> > Sent: Friday, February 3, 2023 1:51 PM > To: linux-pm@vger.kernel.org; loongarch@lists.linux.dev; > kvmarm@lists.linux.dev; kvm@vger.kernel.org; linux-acpi@vger.kernel.org; > linux-arch@vger.kernel.org; linux-ia64@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > x86@kernel.org [...] > > When the KVM_CAP_ARM_PSCI_TO_USER capability is available, userspace can > request to handle PSCI calls. > > This is required for virtual CPU hotplug to allow the VMM to enforce the > online/offline policy it has advertised via ACPI. By managing PSCI in > user-space, the VMM is able to return PSCI_DENIED when the guest attempts > to bring a disabled vCPU online. > Without this, the VMM is only able to not-run the vCPU, the kernel will > have already returned PSCI_SUCCESS to the guest. This results in > timeouts during boot as the OS must wait for the secondary vCPU. > > SMCCC probe requires PSCI v1.x. If userspace only implements PSCI v0.2, > the guest won't query SMCCC support through PSCI and won't use the > spectre workarounds. We could hijack PSCI_VERSION and pretend to support > v1.0 if userspace does not, then handle all v1.0 calls ourselves > (including guessing the PSCI feature set implemented by the guest), but > that seems unnecessary. After all the API already allows userspace to > force a version lower than v1.0 using the firmware pseudo-registers. > > The KVM_REG_ARM_PSCI_VERSION pseudo-register currently resets to either > v0.1 if userspace doesn't set KVM_ARM_VCPU_PSCI_0_2, or > KVM_ARM_PSCI_LATEST (1.0). I just saw the latest PSCI standard issue (Mar 2023 E Non-Confidential PSCI 1.2 issue E) and it contains the DENIED return value for the CPU_ON. Should we *explicitly* check for PSCI 1.2 support before allowing vCPU Hot plug support? For this we would need KVM changes. @James, Since Oliver's patches have now got merged with the kernel I think you would need to rebase your RFC on the latest kernel as patches 29/32 And 30/32 will create conflicts. Many thanks Salil > > Suggested-by: James Morse <james.morse@arm.com> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > [morse: Added description of why this is required] > Signed-off-by: James Morse <james.morse@arm.com> > --- > Documentation/virt/kvm/api.rst | 14 ++++++++++++++ > Documentation/virt/kvm/arm/hypercalls.rst | 1 + > arch/arm64/include/asm/kvm_host.h | 1 + > arch/arm64/kvm/arm.c | 10 +++++++--- > arch/arm64/kvm/hypercalls.c | 2 +- > arch/arm64/kvm/psci.c | 13 +++++++++++++ > include/kvm/arm_hypercalls.h | 1 + > include/uapi/linux/kvm.h | 1 + > 8 files changed, 39 insertions(+), 4 deletions(-) > > diff --git a/Documentation/virt/kvm/api.rst > b/Documentation/virt/kvm/api.rst > index 9a28a9cc1163..eb99436a1d97 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -8289,6 +8289,20 @@ This capability indicates that KVM can pass > unhandled hypercalls to userspace, > if the VMM enables it. Hypercalls are passed with KVM_EXIT_HYPERCALL in > kvm_run::hypercall. > > +8.38 KVM_CAP_ARM_PSCI_TO_USER > +----------------------------- > + > +:Architectures: arm64 > + > +When the VMM enables this capability, all PSCI calls are passed to > userspace > +instead of being handled by KVM. Capability KVM_CAP_ARM_HVC_TO_USER must > be > +enabled first. > + > +Userspace should support at least PSCI v1.0. Otherwise SMCCC features > won't be > +available to the guest. Userspace does not need to handle the > SMCCC_VERSION > +parameter for the PSCI_FEATURES function. The KVM_ARM_VCPU_PSCI_0_2 vCPU > +feature should be set even if this capability is enabled. > + > 9. Known KVM API problems > ========================= > > diff --git a/Documentation/virt/kvm/arm/hypercalls.rst > b/Documentation/virt/kvm/arm/hypercalls.rst > index 3e23084644ba..4c111afa7d74 100644 > --- a/Documentation/virt/kvm/arm/hypercalls.rst > +++ b/Documentation/virt/kvm/arm/hypercalls.rst > @@ -34,6 +34,7 @@ The following registers are defined: > - Allows any PSCI version implemented by KVM and compatible with > v0.2 to be set with SET_ONE_REG > - Affects the whole VM (even if the register view is per-vcpu) > + - Defaults to PSCI 1.0 if userspace enables KVM_CAP_ARM_PSCI_TO_USER. > > * KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: > Holds the state of the firmware support to mitigate CVE-2017-5715, as > diff --git a/arch/arm64/include/asm/kvm_host.h > b/arch/arm64/include/asm/kvm_host.h > index 40911ebfa710..a9eff47bcb43 100644 > --- a/arch/arm64/include/asm/kvm_host.h > +++ b/arch/arm64/include/asm/kvm_host.h > @@ -214,6 +214,7 @@ struct kvm_arch { > /* PSCI SYSTEM_SUSPEND enabled for the guest */ > #define KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED 5 > #define KVM_ARCH_FLAG_HVC_TO_USER 6 > +#define KVM_ARCH_FLAG_PSCI_TO_USER 7 > > unsigned long flags; > > diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c > index 815b7e8f88e1..3dba4e01f4d8 100644 > --- a/arch/arm64/kvm/arm.c > +++ b/arch/arm64/kvm/arm.c > @@ -76,7 +76,7 @@ int kvm_arch_check_processor_compat(void *opaque) > int kvm_vm_ioctl_enable_cap(struct kvm *kvm, > struct kvm_enable_cap *cap) > { > - int r; > + int r = -EINVAL; > > if (cap->flags) > return -EINVAL; > @@ -105,8 +105,11 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, > r = 0; > set_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags); > break; > - default: > - r = -EINVAL; > + case KVM_CAP_ARM_PSCI_TO_USER: > + if (test_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags)) { > + r = 0; > + set_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &kvm->arch.flags); > + } > break; > } > > @@ -235,6 +238,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long > ext) > case KVM_CAP_PTP_KVM: > case KVM_CAP_ARM_SYSTEM_SUSPEND: > case KVM_CAP_ARM_HVC_TO_USER: > + case KVM_CAP_ARM_PSCI_TO_USER: > r = 1; > break; > case KVM_CAP_SET_GUEST_DEBUG2: > diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c > index efaf05d40dab..3c2136cd7a3f 100644 > --- a/arch/arm64/kvm/hypercalls.c > +++ b/arch/arm64/kvm/hypercalls.c > @@ -121,7 +121,7 @@ static bool kvm_hvc_call_allowed(struct kvm_vcpu *vcpu, > u32 func_id) > } > } > > -static int kvm_hvc_user(struct kvm_vcpu *vcpu) > +int kvm_hvc_user(struct kvm_vcpu *vcpu) > { > int i; > struct kvm_run *run = vcpu->run; > diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c > index 7fbc4c1b9df0..8505b26f0a83 100644 > --- a/arch/arm64/kvm/psci.c > +++ b/arch/arm64/kvm/psci.c > @@ -418,6 +418,16 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu) > return 1; > } > > +static bool kvm_psci_call_is_user(struct kvm_vcpu *vcpu) > +{ > + /* Handle the special case of SMCCC probe through PSCI */ > + if (smccc_get_function(vcpu) == PSCI_1_0_FN_PSCI_FEATURES && > + smccc_get_arg1(vcpu) == ARM_SMCCC_VERSION_FUNC_ID) > + return false; > + > + return test_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &vcpu->kvm->arch.flags); > +} > + > /** > * kvm_psci_call - handle PSCI call if r0 value is in range > * @vcpu: Pointer to the VCPU struct > @@ -443,6 +453,9 @@ int kvm_psci_call(struct kvm_vcpu *vcpu) > return 1; > } > > + if (kvm_psci_call_is_user(vcpu)) > + return kvm_hvc_user(vcpu); > + > switch (kvm_psci_version(vcpu)) { > case KVM_ARM_PSCI_1_1: > return kvm_psci_1_x_call(vcpu, 1); > diff --git a/include/kvm/arm_hypercalls.h b/include/kvm/arm_hypercalls.h > index 1188f116cf4e..ea7073d1a82e 100644 > --- a/include/kvm/arm_hypercalls.h > +++ b/include/kvm/arm_hypercalls.h > @@ -6,6 +6,7 @@ > > #include <asm/kvm_emulate.h> > > +int kvm_hvc_user(struct kvm_vcpu *vcpu); > int kvm_hvc_call_handler(struct kvm_vcpu *vcpu); > > static inline u32 smccc_get_function(struct kvm_vcpu *vcpu) > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 2ead8b9aae56..c5da9d703a0f 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1176,6 +1176,7 @@ struct kvm_ppc_resize_hpt { > #define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224 > #define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225 > #define KVM_CAP_ARM_HVC_TO_USER 226 > +#define KVM_CAP_ARM_PSCI_TO_USER 227 > > #ifdef KVM_CAP_IRQ_ROUTING > > -- > 2.30.2 >
Hi Salil, On 23/05/2023 10:32, Salil Mehta wrote: >> From: James Morse <james.morse@arm.com> >> Sent: Friday, February 3, 2023 1:51 PM >> To: linux-pm@vger.kernel.org; loongarch@lists.linux.dev; >> kvmarm@lists.linux.dev; kvm@vger.kernel.org; linux-acpi@vger.kernel.org; >> linux-arch@vger.kernel.org; linux-ia64@vger.kernel.org; linux- >> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; >> x86@kernel.org > > [...] > > >> >> When the KVM_CAP_ARM_PSCI_TO_USER capability is available, userspace can >> request to handle PSCI calls. >> >> This is required for virtual CPU hotplug to allow the VMM to enforce the >> online/offline policy it has advertised via ACPI. By managing PSCI in >> user-space, the VMM is able to return PSCI_DENIED when the guest attempts >> to bring a disabled vCPU online. >> Without this, the VMM is only able to not-run the vCPU, the kernel will >> have already returned PSCI_SUCCESS to the guest. This results in >> timeouts during boot as the OS must wait for the secondary vCPU. >> >> SMCCC probe requires PSCI v1.x. If userspace only implements PSCI v0.2, >> the guest won't query SMCCC support through PSCI and won't use the >> spectre workarounds. We could hijack PSCI_VERSION and pretend to support >> v1.0 if userspace does not, then handle all v1.0 calls ourselves >> (including guessing the PSCI feature set implemented by the guest), but >> that seems unnecessary. After all the API already allows userspace to >> force a version lower than v1.0 using the firmware pseudo-registers. >> >> The KVM_REG_ARM_PSCI_VERSION pseudo-register currently resets to either >> v0.1 if userspace doesn't set KVM_ARM_VCPU_PSCI_0_2, or >> KVM_ARM_PSCI_LATEST (1.0). > I just saw the latest PSCI standard issue (Mar 2023 E Non-Confidential > PSCI 1.2 issue E) and it contains the DENIED return value for the CPU_ON. > > Should we *explicitly* check for PSCI 1.2 support before allowing vCPU > Hot plug support? For this we would need KVM changes. The VMM should certainly check which version of PSCI it supports, to make sure it doesn't return an error code that the spec says that version of PSCI doesn't use. Moving the PSCI support to the VMM is a pre-requisite for supporting this mechanism, otherwise KVM will allow the CPUs to come online immediately. Thanks, James
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 9a28a9cc1163..eb99436a1d97 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -8289,6 +8289,20 @@ This capability indicates that KVM can pass unhandled hypercalls to userspace, if the VMM enables it. Hypercalls are passed with KVM_EXIT_HYPERCALL in kvm_run::hypercall. +8.38 KVM_CAP_ARM_PSCI_TO_USER +----------------------------- + +:Architectures: arm64 + +When the VMM enables this capability, all PSCI calls are passed to userspace +instead of being handled by KVM. Capability KVM_CAP_ARM_HVC_TO_USER must be +enabled first. + +Userspace should support at least PSCI v1.0. Otherwise SMCCC features won't be +available to the guest. Userspace does not need to handle the SMCCC_VERSION +parameter for the PSCI_FEATURES function. The KVM_ARM_VCPU_PSCI_0_2 vCPU +feature should be set even if this capability is enabled. + 9. Known KVM API problems ========================= diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst index 3e23084644ba..4c111afa7d74 100644 --- a/Documentation/virt/kvm/arm/hypercalls.rst +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -34,6 +34,7 @@ The following registers are defined: - Allows any PSCI version implemented by KVM and compatible with v0.2 to be set with SET_ONE_REG - Affects the whole VM (even if the register view is per-vcpu) + - Defaults to PSCI 1.0 if userspace enables KVM_CAP_ARM_PSCI_TO_USER. * KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: Holds the state of the firmware support to mitigate CVE-2017-5715, as diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 40911ebfa710..a9eff47bcb43 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -214,6 +214,7 @@ struct kvm_arch { /* PSCI SYSTEM_SUSPEND enabled for the guest */ #define KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED 5 #define KVM_ARCH_FLAG_HVC_TO_USER 6 +#define KVM_ARCH_FLAG_PSCI_TO_USER 7 unsigned long flags; diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 815b7e8f88e1..3dba4e01f4d8 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -76,7 +76,7 @@ int kvm_arch_check_processor_compat(void *opaque) int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap) { - int r; + int r = -EINVAL; if (cap->flags) return -EINVAL; @@ -105,8 +105,11 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, r = 0; set_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags); break; - default: - r = -EINVAL; + case KVM_CAP_ARM_PSCI_TO_USER: + if (test_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags)) { + r = 0; + set_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &kvm->arch.flags); + } break; } @@ -235,6 +238,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_PTP_KVM: case KVM_CAP_ARM_SYSTEM_SUSPEND: case KVM_CAP_ARM_HVC_TO_USER: + case KVM_CAP_ARM_PSCI_TO_USER: r = 1; break; case KVM_CAP_SET_GUEST_DEBUG2: diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c index efaf05d40dab..3c2136cd7a3f 100644 --- a/arch/arm64/kvm/hypercalls.c +++ b/arch/arm64/kvm/hypercalls.c @@ -121,7 +121,7 @@ static bool kvm_hvc_call_allowed(struct kvm_vcpu *vcpu, u32 func_id) } } -static int kvm_hvc_user(struct kvm_vcpu *vcpu) +int kvm_hvc_user(struct kvm_vcpu *vcpu) { int i; struct kvm_run *run = vcpu->run; diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c index 7fbc4c1b9df0..8505b26f0a83 100644 --- a/arch/arm64/kvm/psci.c +++ b/arch/arm64/kvm/psci.c @@ -418,6 +418,16 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu) return 1; } +static bool kvm_psci_call_is_user(struct kvm_vcpu *vcpu) +{ + /* Handle the special case of SMCCC probe through PSCI */ + if (smccc_get_function(vcpu) == PSCI_1_0_FN_PSCI_FEATURES && + smccc_get_arg1(vcpu) == ARM_SMCCC_VERSION_FUNC_ID) + return false; + + return test_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &vcpu->kvm->arch.flags); +} + /** * kvm_psci_call - handle PSCI call if r0 value is in range * @vcpu: Pointer to the VCPU struct @@ -443,6 +453,9 @@ int kvm_psci_call(struct kvm_vcpu *vcpu) return 1; } + if (kvm_psci_call_is_user(vcpu)) + return kvm_hvc_user(vcpu); + switch (kvm_psci_version(vcpu)) { case KVM_ARM_PSCI_1_1: return kvm_psci_1_x_call(vcpu, 1); diff --git a/include/kvm/arm_hypercalls.h b/include/kvm/arm_hypercalls.h index 1188f116cf4e..ea7073d1a82e 100644 --- a/include/kvm/arm_hypercalls.h +++ b/include/kvm/arm_hypercalls.h @@ -6,6 +6,7 @@ #include <asm/kvm_emulate.h> +int kvm_hvc_user(struct kvm_vcpu *vcpu); int kvm_hvc_call_handler(struct kvm_vcpu *vcpu); static inline u32 smccc_get_function(struct kvm_vcpu *vcpu) diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 2ead8b9aae56..c5da9d703a0f 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1176,6 +1176,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224 #define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225 #define KVM_CAP_ARM_HVC_TO_USER 226 +#define KVM_CAP_ARM_PSCI_TO_USER 227 #ifdef KVM_CAP_IRQ_ROUTING