| Message ID | 20240312212626.29007-2-zaidal@os.amperecomputing.com (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
| Series | Enable EINJv2 Support | expand |
On Tue, Mar 12, 2024 at 02:26:22PM -0700, Zaid Alali wrote: > EINJv2 capabilities can be discovered by checking the return value > of get_error_type, where bit 30 set indicates EINJv2 support. This > commit enables the driver to show all supported error injections Drop "This commit" and write this using imperative mood (as a command). For this one, "Enable the driver to show all supported error injections for EINJ and EINJv2 at the same time". > for EINJ and EINJv2 at the same time. > > Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com> > --- > drivers/acpi/apei/einj.c | 37 ++++++++++++++++++++++++++++++------- > include/acpi/actbl1.h | 1 + > 2 files changed, 31 insertions(+), 7 deletions(-) > > diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c > index 89fb9331c611..90efbcbf6b54 100644 > --- a/drivers/acpi/apei/einj.c > +++ b/drivers/acpi/apei/einj.c > @@ -32,6 +32,7 @@ > #define SLEEP_UNIT_MAX 5000 /* 5ms */ > /* Firmware should respond within 1 seconds */ > #define FIRMWARE_TIMEOUT (1 * USEC_PER_SEC) > +#define ACPI65_EINJV2_SUPP BIT(30) > #define ACPI5_VENDOR_BIT BIT(31) > #define MEM_ERROR_MASK (ACPI_EINJ_MEMORY_CORRECTABLE | \ > ACPI_EINJ_MEMORY_UNCORRECTABLE | \ > @@ -145,13 +146,13 @@ static void einj_exec_ctx_init(struct apei_exec_context *ctx) > EINJ_TAB_ENTRY(einj_tab), einj_tab->entries); > } > > -static int __einj_get_available_error_type(u32 *type) > +static int __einj_get_available_error_type(u32 *type, int version) > { > struct apei_exec_context ctx; > int rc; > > einj_exec_ctx_init(&ctx); > - rc = apei_exec_run(&ctx, ACPI_EINJ_GET_ERROR_TYPE); > + rc = apei_exec_run(&ctx, version); > if (rc) > return rc; > *type = apei_exec_ctx_get_output(&ctx); > @@ -160,12 +161,12 @@ static int __einj_get_available_error_type(u32 *type) > } > > /* Get error injection capabilities of the platform */ > -static int einj_get_available_error_type(u32 *type) > +static int einj_get_available_error_type(u32 *type, int version) > { > int rc; > > mutex_lock(&einj_mutex); > - rc = __einj_get_available_error_type(type); > + rc = __einj_get_available_error_type(type, version); > mutex_unlock(&einj_mutex); > > return rc; > @@ -221,9 +222,14 @@ static void check_vendor_extension(u64 paddr, > > static void *einj_get_parameter_address(void) > { > - int i; > + int i, rc; > u64 pa_v4 = 0, pa_v5 = 0; > struct acpi_whea_header *entry; > + u32 error_type = 0; > + > + rc = einj_get_available_error_type(&error_type, ACPI_EINJ_GET_ERROR_TYPE); > + if (rc) > + return NULL; > > entry = EINJ_TAB_ENTRY(einj_tab); > for (i = 0; i < einj_tab->entries; i++) { > @@ -615,19 +621,35 @@ static struct { u32 mask; const char *str; } const einj_error_type_string[] = { > { BIT(17), "CXL.mem Protocol Uncorrectable fatal" }, > { BIT(31), "Vendor Defined Error Types" }, > }; > +static struct { u32 mask; const char *str; } const einjv2_error_type_string[] = { > + { BIT(0), "EINJV2 Processor Error" }, > + { BIT(1), "EINJV2 Memory Error" }, > + { BIT(2), "EINJV2 PCI Express Error" }, > +}; > > static int available_error_type_show(struct seq_file *m, void *v) > { > int rc; > u32 error_type = 0; > > - rc = einj_get_available_error_type(&error_type); > + rc = einj_get_available_error_type(&error_type, ACPI_EINJ_GET_ERROR_TYPE); > if (rc) > return rc; > for (int pos = 0; pos < ARRAY_SIZE(einj_error_type_string); pos++) > if (error_type & einj_error_type_string[pos].mask) > seq_printf(m, "0x%08x\t%s\n", einj_error_type_string[pos].mask, > einj_error_type_string[pos].str); > + if (error_type & ACPI65_EINJV2_SUPP) { > + rc = einj_get_available_error_type(&error_type, ACPI_EINJV2_GET_ERROR_TYPE); > + if (rc) > + return rc; > + seq_printf(m, "====================\n"); Seems like if we're going to visually split the EINJ and EINJv2 cases, rather than just splitting them with the above line, it might be better to be more descriptive. For example: # cat available_error_type EINJ error types: 0x00000002 Processor Uncorrectable non-fatal 0x00000008 Memory Correctable 0x00000010 Memory Uncorrectable non-fatal EINJv2 error types: 0x00000001 EINJV2 Processor Error 0x00000002 EINJV2 Memory Error > + for (int pos = 0; pos < ARRAY_SIZE(einjv2_error_type_string); pos++) > + if (error_type & einjv2_error_type_string[pos].mask) > + seq_printf(m, "0x%08x\t%s\n", einjv2_error_type_string[pos].mask, > + einjv2_error_type_string[pos].str); When you break a long function call like this, the second line should align below the first character after the parenthesis. For example: seq_printf(m, "0x%08x\t%s\n", einjv2_error_type_string[pos].mask, einjv2_error_type_string[pos].str); There are a few other places in the series where alignment should be fixed in this way as well. Thanks, John > + > + } > > return 0; > } > @@ -662,7 +684,8 @@ static int error_type_set(void *data, u64 val) > if (tval & (tval - 1)) > return -EINVAL; > if (!vendor) { > - rc = einj_get_available_error_type(&available_error_type); > + rc = einj_get_available_error_type(&available_error_type, > + ACPI_EINJ_GET_ERROR_TYPE); > if (rc) > return rc; > if (!(val & available_error_type)) > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h > index a33375e055ad..a07d564b0590 100644 > --- a/include/acpi/actbl1.h > +++ b/include/acpi/actbl1.h > @@ -1030,6 +1030,7 @@ enum acpi_einj_actions { > ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8, > ACPI_EINJ_GET_EXECUTE_TIMINGS = 9, > ACPI_EINJ_ACTION_RESERVED = 10, /* 10 and greater are reserved */ > + ACPI_EINJV2_GET_ERROR_TYPE = 0x11, > ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ > }; > > -- > 2.34.1 >
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 89fb9331c611..90efbcbf6b54 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -32,6 +32,7 @@ #define SLEEP_UNIT_MAX 5000 /* 5ms */ /* Firmware should respond within 1 seconds */ #define FIRMWARE_TIMEOUT (1 * USEC_PER_SEC) +#define ACPI65_EINJV2_SUPP BIT(30) #define ACPI5_VENDOR_BIT BIT(31) #define MEM_ERROR_MASK (ACPI_EINJ_MEMORY_CORRECTABLE | \ ACPI_EINJ_MEMORY_UNCORRECTABLE | \ @@ -145,13 +146,13 @@ static void einj_exec_ctx_init(struct apei_exec_context *ctx) EINJ_TAB_ENTRY(einj_tab), einj_tab->entries); } -static int __einj_get_available_error_type(u32 *type) +static int __einj_get_available_error_type(u32 *type, int version) { struct apei_exec_context ctx; int rc; einj_exec_ctx_init(&ctx); - rc = apei_exec_run(&ctx, ACPI_EINJ_GET_ERROR_TYPE); + rc = apei_exec_run(&ctx, version); if (rc) return rc; *type = apei_exec_ctx_get_output(&ctx); @@ -160,12 +161,12 @@ static int __einj_get_available_error_type(u32 *type) } /* Get error injection capabilities of the platform */ -static int einj_get_available_error_type(u32 *type) +static int einj_get_available_error_type(u32 *type, int version) { int rc; mutex_lock(&einj_mutex); - rc = __einj_get_available_error_type(type); + rc = __einj_get_available_error_type(type, version); mutex_unlock(&einj_mutex); return rc; @@ -221,9 +222,14 @@ static void check_vendor_extension(u64 paddr, static void *einj_get_parameter_address(void) { - int i; + int i, rc; u64 pa_v4 = 0, pa_v5 = 0; struct acpi_whea_header *entry; + u32 error_type = 0; + + rc = einj_get_available_error_type(&error_type, ACPI_EINJ_GET_ERROR_TYPE); + if (rc) + return NULL; entry = EINJ_TAB_ENTRY(einj_tab); for (i = 0; i < einj_tab->entries; i++) { @@ -615,19 +621,35 @@ static struct { u32 mask; const char *str; } const einj_error_type_string[] = { { BIT(17), "CXL.mem Protocol Uncorrectable fatal" }, { BIT(31), "Vendor Defined Error Types" }, }; +static struct { u32 mask; const char *str; } const einjv2_error_type_string[] = { + { BIT(0), "EINJV2 Processor Error" }, + { BIT(1), "EINJV2 Memory Error" }, + { BIT(2), "EINJV2 PCI Express Error" }, +}; static int available_error_type_show(struct seq_file *m, void *v) { int rc; u32 error_type = 0; - rc = einj_get_available_error_type(&error_type); + rc = einj_get_available_error_type(&error_type, ACPI_EINJ_GET_ERROR_TYPE); if (rc) return rc; for (int pos = 0; pos < ARRAY_SIZE(einj_error_type_string); pos++) if (error_type & einj_error_type_string[pos].mask) seq_printf(m, "0x%08x\t%s\n", einj_error_type_string[pos].mask, einj_error_type_string[pos].str); + if (error_type & ACPI65_EINJV2_SUPP) { + rc = einj_get_available_error_type(&error_type, ACPI_EINJV2_GET_ERROR_TYPE); + if (rc) + return rc; + seq_printf(m, "====================\n"); + for (int pos = 0; pos < ARRAY_SIZE(einjv2_error_type_string); pos++) + if (error_type & einjv2_error_type_string[pos].mask) + seq_printf(m, "0x%08x\t%s\n", einjv2_error_type_string[pos].mask, + einjv2_error_type_string[pos].str); + + } return 0; } @@ -662,7 +684,8 @@ static int error_type_set(void *data, u64 val) if (tval & (tval - 1)) return -EINVAL; if (!vendor) { - rc = einj_get_available_error_type(&available_error_type); + rc = einj_get_available_error_type(&available_error_type, + ACPI_EINJ_GET_ERROR_TYPE); if (rc) return rc; if (!(val & available_error_type)) diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index a33375e055ad..a07d564b0590 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -1030,6 +1030,7 @@ enum acpi_einj_actions { ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8, ACPI_EINJ_GET_EXECUTE_TIMINGS = 9, ACPI_EINJ_ACTION_RESERVED = 10, /* 10 and greater are reserved */ + ACPI_EINJV2_GET_ERROR_TYPE = 0x11, ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ };
EINJv2 capabilities can be discovered by checking the return value of get_error_type, where bit 30 set indicates EINJv2 support. This commit enables the driver to show all supported error injections for EINJ and EINJv2 at the same time. Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com> --- drivers/acpi/apei/einj.c | 37 ++++++++++++++++++++++++++++++------- include/acpi/actbl1.h | 1 + 2 files changed, 31 insertions(+), 7 deletions(-)