Message ID | 20240312212626.29007-5-zaidal@os.amperecomputing.com (mailing list archive) |
---|---|
State | RFC, archived |
Headers | show |
Series | Enable EINJv2 Support | expand |
On Tue, Mar 12, 2024 at 02:26:25PM -0700, Zaid Alali wrote: > This commit enable the driver to inject EINJv2 type errors. Same with other commits, commit descriptions should be in imperative mood. For this one I might say something like, "Support injecting EINJv2 type errors." or something along those lines. > The component array values are parsed from user_input and expected > to contain hex values for component id and syndrom seperated by s/syndrom/syndrome > space, and multiple components are separated by new line. > > for example: > component_id1 component_syndrom1 s/syndrom/syndrome Same for the below lines. > component_id2 component_syndrom2 > : > component_id(n) component_syndrom(n) This interface seems a bit clunky, but I can't think of a way a better way to do it right now. Can you provide an example of how a user would write to the component array file? This would be a good addition to the example in the documentation provided in patch 5/5. > > Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com> > --- > drivers/acpi/apei/einj.c | 89 ++++++++++++++++++++++++++++++++++++---- > 1 file changed, 80 insertions(+), 9 deletions(-) > > diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c > index ceac53aa0d3f..9e31bf707ced 100644 > --- a/drivers/acpi/apei/einj.c > +++ b/drivers/acpi/apei/einj.c > @@ -80,6 +80,13 @@ enum { > SETWA_FLAGS_APICID = 1, > SETWA_FLAGS_MEM = 2, > SETWA_FLAGS_PCIE_SBDF = 4, > + SETWA_FLAGS_EINJV2 = 8, > +}; > + > +enum { > + EINJV2_PROCESSOR_ERROR = 0x1, > + EINJV2_MEMORY_ERROR = 0x2, > + EINJV2_PCIE_ERROR = 0x4, > }; > > /* > @@ -104,6 +111,7 @@ static char vendor_dev[64]; > static struct debugfs_blob_wrapper einjv2_component_arr; > static u64 component_count; > static void *user_input; > +static int nr_components; > > /* > * Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the > @@ -275,11 +283,20 @@ static void *einj_get_parameter_address(void) > } > if (pa_v5) { > struct set_error_type_with_address *v5param; > - > v5param = acpi_os_map_iomem(pa_v5, sizeof(*v5param)); > if (v5param) { > + int offset, len; > + > acpi5 = 1; > check_vendor_extension(pa_v5, v5param); > + if (error_type & ACPI65_EINJV2_SUPP) { > + len = v5param->einjv2_struct.length; > + offset = offsetof(struct einjv2_extension_struct, component_arr); > + nr_components = (len-offset)/32; Binary operators like '-' and '/' should have a single space on either side: nr_components = (len - offset) / 32; Some places have this right, but there are a number of other places in the series that should fix this as well. > + acpi_os_unmap_iomem(v5param, sizeof(*v5param)); > + v5param = acpi_os_map_iomem(pa_v5, sizeof(*v5param) + ( > + (nr_components) * sizeof(struct syndrome_array))); > + } > return v5param; > } > } > @@ -485,10 +502,47 @@ static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, > v5param->flags = vendor_flags; > } else if (flags) { > v5param->flags = flags; > - v5param->memory_address = param1; > - v5param->memory_address_range = param2; > - v5param->apicid = param3; > - v5param->pcie_sbdf = param4; > + if (flags & SETWA_FLAGS_MEM) { > + v5param->memory_address = param1; > + v5param->memory_address_range = param2; > + } > + if (flags & SETWA_FLAGS_EINJV2) { > + if (component_count > nr_components) > + return -EINVAL; > + > + v5param->einjv2_struct.component_arr_count = component_count; > + int count = 0, bytes_read, pos = 0; > + unsigned int comp, synd; > + struct syndrome_array *component_arr; > + > + component_arr = v5param->einjv2_struct.component_arr; > + while (sscanf(user_input+pos, "%x %x\n%n", &comp, &synd, > + &bytes_read) == 2) { > + count++; > + pos += bytes_read; > + if (count > component_count) > + return -EINVAL; > + > + switch (type) { > + case EINJV2_PROCESSOR_ERROR: > + component_arr[count-1].comp_id.acpi_id = comp; > + component_arr[count-1].comp_synd.proc_synd = synd; > + break; > + case EINJV2_MEMORY_ERROR: > + component_arr[count-1].comp_id.device_id = comp; > + component_arr[count-1].comp_synd.mem_synd = synd; > + break; > + case EINJV2_PCIE_ERROR: > + component_arr[count-1].comp_id.pcie_sbdf = comp; > + component_arr[count-1].comp_synd.pcie_synd = synd; > + break; Nesting is getting pretty deep here. A separate function for parsing the component array could improve readability. > + } > + } > + Remove unneeded new line above. Thanks, John > + } else { > + v5param->apicid = param3; > + v5param->pcie_sbdf = param4; > + } > } else { > switch (type) { > case ACPI_EINJ_PROCESSOR_CORRECTABLE: > @@ -572,9 +626,19 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, > > /* If user manually set "flags", make sure it is legal */ > if (flags && (flags & > - ~(SETWA_FLAGS_APICID|SETWA_FLAGS_MEM|SETWA_FLAGS_PCIE_SBDF))) > + ~(SETWA_FLAGS_APICID|SETWA_FLAGS_MEM|SETWA_FLAGS_PCIE_SBDF|SETWA_FLAGS_EINJV2))) > return -EINVAL; > > + /*check if type is a valid EINJv2 error type*/ > + if (flags & SETWA_FLAGS_EINJV2) { > + u32 error_type; > + > + rc = einj_get_available_error_type(&error_type, ACPI_EINJV2_GET_ERROR_TYPE); > + if (rc) > + return rc; > + if (!(type & error_type)) > + return -EINVAL; > + } > /* > * We need extra sanity checks for memory errors. > * Other types leap directly to injection. > @@ -694,7 +758,7 @@ static int error_type_get(void *data, u64 *val) > static int error_type_set(void *data, u64 val) > { > int rc; > - u32 available_error_type = 0; > + u32 available_error_type = 0, available_error_type_v2 = 0; > u32 tval, vendor; > > /* Only low 32 bits for error type are valid */ > @@ -716,7 +780,13 @@ static int error_type_set(void *data, u64 val) > ACPI_EINJ_GET_ERROR_TYPE); > if (rc) > return rc; > - if (!(val & available_error_type)) > + if (available_error_type & ACPI65_EINJV2_SUPP) { > + rc = einj_get_available_error_type(&available_error_type_v2, > + ACPI_EINJV2_GET_ERROR_TYPE); > + if (rc) > + return rc; > + } > + if (!(val & (available_error_type | available_error_type_v2))) > return -EINVAL; > } > error_type = val; > @@ -886,7 +956,8 @@ static void __exit einj_exit(void) > sizeof(struct set_error_type_with_address) : > sizeof(struct einj_parameter); > > - acpi_os_unmap_iomem(einj_param, size); > + acpi_os_unmap_iomem(einj_param, > + size+((nr_components) * sizeof(struct syndrome_array))); > if (vendor_errors.size) > acpi_os_unmap_memory(vendor_errors.data, vendor_errors.size); > } > -- > 2.34.1 >
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index ceac53aa0d3f..9e31bf707ced 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -80,6 +80,13 @@ enum { SETWA_FLAGS_APICID = 1, SETWA_FLAGS_MEM = 2, SETWA_FLAGS_PCIE_SBDF = 4, + SETWA_FLAGS_EINJV2 = 8, +}; + +enum { + EINJV2_PROCESSOR_ERROR = 0x1, + EINJV2_MEMORY_ERROR = 0x2, + EINJV2_PCIE_ERROR = 0x4, }; /* @@ -104,6 +111,7 @@ static char vendor_dev[64]; static struct debugfs_blob_wrapper einjv2_component_arr; static u64 component_count; static void *user_input; +static int nr_components; /* * Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the @@ -275,11 +283,20 @@ static void *einj_get_parameter_address(void) } if (pa_v5) { struct set_error_type_with_address *v5param; - v5param = acpi_os_map_iomem(pa_v5, sizeof(*v5param)); if (v5param) { + int offset, len; + acpi5 = 1; check_vendor_extension(pa_v5, v5param); + if (error_type & ACPI65_EINJV2_SUPP) { + len = v5param->einjv2_struct.length; + offset = offsetof(struct einjv2_extension_struct, component_arr); + nr_components = (len-offset)/32; + acpi_os_unmap_iomem(v5param, sizeof(*v5param)); + v5param = acpi_os_map_iomem(pa_v5, sizeof(*v5param) + ( + (nr_components) * sizeof(struct syndrome_array))); + } return v5param; } } @@ -485,10 +502,47 @@ static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, v5param->flags = vendor_flags; } else if (flags) { v5param->flags = flags; - v5param->memory_address = param1; - v5param->memory_address_range = param2; - v5param->apicid = param3; - v5param->pcie_sbdf = param4; + if (flags & SETWA_FLAGS_MEM) { + v5param->memory_address = param1; + v5param->memory_address_range = param2; + } + if (flags & SETWA_FLAGS_EINJV2) { + if (component_count > nr_components) + return -EINVAL; + + v5param->einjv2_struct.component_arr_count = component_count; + int count = 0, bytes_read, pos = 0; + unsigned int comp, synd; + struct syndrome_array *component_arr; + + component_arr = v5param->einjv2_struct.component_arr; + while (sscanf(user_input+pos, "%x %x\n%n", &comp, &synd, + &bytes_read) == 2) { + count++; + pos += bytes_read; + if (count > component_count) + return -EINVAL; + + switch (type) { + case EINJV2_PROCESSOR_ERROR: + component_arr[count-1].comp_id.acpi_id = comp; + component_arr[count-1].comp_synd.proc_synd = synd; + break; + case EINJV2_MEMORY_ERROR: + component_arr[count-1].comp_id.device_id = comp; + component_arr[count-1].comp_synd.mem_synd = synd; + break; + case EINJV2_PCIE_ERROR: + component_arr[count-1].comp_id.pcie_sbdf = comp; + component_arr[count-1].comp_synd.pcie_synd = synd; + break; + } + } + + } else { + v5param->apicid = param3; + v5param->pcie_sbdf = param4; + } } else { switch (type) { case ACPI_EINJ_PROCESSOR_CORRECTABLE: @@ -572,9 +626,19 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, /* If user manually set "flags", make sure it is legal */ if (flags && (flags & - ~(SETWA_FLAGS_APICID|SETWA_FLAGS_MEM|SETWA_FLAGS_PCIE_SBDF))) + ~(SETWA_FLAGS_APICID|SETWA_FLAGS_MEM|SETWA_FLAGS_PCIE_SBDF|SETWA_FLAGS_EINJV2))) return -EINVAL; + /*check if type is a valid EINJv2 error type*/ + if (flags & SETWA_FLAGS_EINJV2) { + u32 error_type; + + rc = einj_get_available_error_type(&error_type, ACPI_EINJV2_GET_ERROR_TYPE); + if (rc) + return rc; + if (!(type & error_type)) + return -EINVAL; + } /* * We need extra sanity checks for memory errors. * Other types leap directly to injection. @@ -694,7 +758,7 @@ static int error_type_get(void *data, u64 *val) static int error_type_set(void *data, u64 val) { int rc; - u32 available_error_type = 0; + u32 available_error_type = 0, available_error_type_v2 = 0; u32 tval, vendor; /* Only low 32 bits for error type are valid */ @@ -716,7 +780,13 @@ static int error_type_set(void *data, u64 val) ACPI_EINJ_GET_ERROR_TYPE); if (rc) return rc; - if (!(val & available_error_type)) + if (available_error_type & ACPI65_EINJV2_SUPP) { + rc = einj_get_available_error_type(&available_error_type_v2, + ACPI_EINJV2_GET_ERROR_TYPE); + if (rc) + return rc; + } + if (!(val & (available_error_type | available_error_type_v2))) return -EINVAL; } error_type = val; @@ -886,7 +956,8 @@ static void __exit einj_exit(void) sizeof(struct set_error_type_with_address) : sizeof(struct einj_parameter); - acpi_os_unmap_iomem(einj_param, size); + acpi_os_unmap_iomem(einj_param, + size+((nr_components) * sizeof(struct syndrome_array))); if (vendor_errors.size) acpi_os_unmap_memory(vendor_errors.data, vendor_errors.size); }
This commit enable the driver to inject EINJv2 type errors. The component array values are parsed from user_input and expected to contain hex values for component id and syndrom seperated by space, and multiple components are separated by new line. for example: component_id1 component_syndrom1 component_id2 component_syndrom2 : component_id(n) component_syndrom(n) Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com> --- drivers/acpi/apei/einj.c | 89 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 80 insertions(+), 9 deletions(-)