@@ -393,4 +393,21 @@ config ACPI_EXTLOG
driver adds support for that functionality with corresponding
tracepoint which carries that information to userspace.
+menuconfig PMIC_OPREGION
+ bool "PMIC (Power Management Integrated Circuit) operation region support"
+ help
+ Select this option to enable support for ACPI operation
+ region of the PMIC chip. The operation region can be used
+ to control power rails and sensor reading/writing on the
+ PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+ bool "ACPI operation region support for CrystalCove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for CrystalCove PMIC.
+
+endif
+
endif # ACPI
@@ -88,3 +88,6 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
new file mode 100644
@@ -0,0 +1,354 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_POWER_OPREGION_ID 0x8d
+#define PMIC_THERMAL_OPREGION_ID 0x8c
+
+struct acpi_lpat {
+ int temp;
+ int raw;
+};
+
+struct intel_pmic_opregion {
+ struct mutex lock;
+ struct acpi_lpat *lpat;
+ int lpat_count;
+ struct regmap *regmap;
+ struct intel_pmic_opregion_data *data;
+};
+
+static int pmic_get_reg_bit(int address, struct pmic_table *table,
+ int count, int *reg, int *bit)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (table[i].address == address) {
+ *reg = table[i].reg;
+ if (bit)
+ *bit = table[i].bit;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+/**
+ * raw_to_temp(): Return temperature from raw value through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @raw: the raw value, used as a key to get the temerature from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+ int i, delta_temp, delta_raw, temp;
+
+ for (i = 0; i < count - 1; i++) {
+ if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+ (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+ return temp;
+}
+
+/**
+ * temp_to_raw(): Return raw value from temperature through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @temp: the temperature, used as a key to get the raw value from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+ int i, delta_temp, delta_raw, raw;
+
+ for (i = 0; i < count - 1; i++) {
+ if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+ return raw;
+}
+
+static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion,
+ acpi_handle handle, struct device *dev)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj_p, *obj_e;
+ int *lpat, i;
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return;
+
+ obj_p = (union acpi_object *)buffer.pointer;
+ if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+ (obj_p->package.count % 2) || (obj_p->package.count < 4))
+ goto out;
+
+ lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count,
+ GFP_KERNEL);
+ if (!lpat)
+ goto out;
+
+ for (i = 0; i < obj_p->package.count; i++) {
+ obj_e = &obj_p->package.elements[i];
+ if (obj_e->type != ACPI_TYPE_INTEGER) {
+ devm_kfree(dev, lpat);
+ goto out;
+ }
+ lpat[i] = (s64)obj_e->integer.value;
+ }
+
+ opregion->lpat = (struct acpi_lpat *)lpat;
+ opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+ kfree(buffer.pointer);
+}
+
+static acpi_status intel_pmic_power_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct regmap *regmap = opregion->regmap;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, bit, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->power_table,
+ d->power_table_count, ®, &bit);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ result = function == ACPI_READ ?
+ d->get_power(regmap, reg, bit, value64) :
+ d->update_power(regmap, reg, bit, *value64 == 1);
+
+ mutex_unlock(&opregion->lock);
+
+ return result ? AE_ERROR : AE_OK;
+}
+
+static int pmic_read_temp(struct intel_pmic_opregion *opregion,
+ int reg, u64 *value)
+{
+ int raw_temp, temp;
+
+ if (!opregion->data->get_raw_temp)
+ return -ENXIO;
+
+ raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+ if (raw_temp < 0)
+ return raw_temp;
+
+ if (!opregion->lpat) {
+ *value = raw_temp;
+ return 0;
+ }
+
+ temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+ if (temp < 0)
+ return temp;
+
+ *value = temp;
+ return 0;
+}
+
+static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ return function == ACPI_READ ?
+ pmic_read_temp(opregion, reg, value) : -EINVAL;
+}
+
+static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ int raw_temp;
+
+ if (function == ACPI_READ)
+ return pmic_read_temp(opregion, reg, value);
+
+ if (!opregion->data->update_aux)
+ return -ENXIO;
+
+ if (opregion->lpat) {
+ raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+ *value);
+ if (raw_temp < 0)
+ return raw_temp;
+ } else {
+ raw_temp = *value;
+ }
+
+ return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
+}
+
+static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ struct intel_pmic_opregion_data *d = opregion->data;
+ struct regmap *regmap = opregion->regmap;
+
+ if (!d->get_policy || !d->update_policy)
+ return -ENXIO;
+
+ if (function == ACPI_READ)
+ return d->get_policy(regmap, reg, value);
+
+ if (*value != 0 || *value != 1)
+ return -EINVAL;
+
+ return d->update_policy(regmap, reg, *value);
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+ return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+ return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+ (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+ return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status intel_pmic_thermal_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->thermal_table,
+ d->thermal_table_count, ®, NULL);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ if (pmic_thermal_is_temp(address))
+ result = pmic_thermal_temp(opregion, reg, function, value64);
+ else if (pmic_thermal_is_aux(address))
+ result = pmic_thermal_aux(opregion, reg, function, value64);
+ else if (pmic_thermal_is_pen(address))
+ result = pmic_thermal_pen(opregion, reg, function, value64);
+ else
+ result = -EINVAL;
+
+ mutex_unlock(&opregion->lock);
+
+ if (result < 0) {
+ if (result == -EINVAL)
+ return AE_BAD_PARAMETER;
+ else
+ return AE_ERROR;
+ }
+
+ return AE_OK;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+ struct regmap *regmap,
+ struct intel_pmic_opregion_data *d)
+{
+ acpi_status status;
+ struct intel_pmic_opregion *opregion;
+
+ if (!dev || !regmap || !d)
+ return -EINVAL;
+
+ if (!handle)
+ return -ENODEV;
+
+ opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+ if (!opregion)
+ return -ENOMEM;
+
+ mutex_init(&opregion->lock);
+ opregion->regmap = regmap;
+ pmic_thermal_lpat(opregion, handle, dev);
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_THERMAL_OPREGION_ID,
+ intel_pmic_thermal_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status)) {
+ acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler);
+ return -ENODEV;
+ }
+
+ opregion->data = d;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,25 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_table {
+ int address; /* operation region address */
+ int reg; /* corresponding thermal register */
+ int bit; /* control bit for power */
+};
+
+struct intel_pmic_opregion_data {
+ int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
+ int (*update_power)(struct regmap *r, int reg, int bit, bool on);
+ int (*get_raw_temp)(struct regmap *r, int reg);
+ int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+ int (*get_policy)(struct regmap *r, int reg, u64 *value);
+ int (*update_policy)(struct regmap *r, int reg, int enable);
+ struct pmic_table *power_table;
+ int power_table_count;
+ struct pmic_table *thermal_table;
+ int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
new file mode 100644
@@ -0,0 +1,211 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT BIT(1)
+
+#define PMIC_A0LOCK_REG 0xc5
+
+static struct pmic_table power_table[] = {
+ {
+ .address = 0x24,
+ .reg = 0x66,
+ .bit = 0x00,
+ },
+ {
+ .address = 0x48,
+ .reg = 0x5d,
+ .bit = 0x00,
+ },
+};
+
+static struct pmic_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x75
+ },
+ {
+ .address = 0x04,
+ .reg = 0x95
+ },
+ {
+ .address = 0x08,
+ .reg = 0x97
+ },
+ {
+ .address = 0x0c,
+ .reg = 0x77
+ },
+ {
+ .address = 0x10,
+ .reg = 0x9a
+ },
+ {
+ .address = 0x14,
+ .reg = 0x9c
+ },
+ {
+ .address = 0x18,
+ .reg = 0x79
+ },
+ {
+ .address = 0x1c,
+ .reg = 0x9f
+ },
+ {
+ .address = 0x20,
+ .reg = 0xa1
+ },
+ {
+ .address = 0x48,
+ .reg = 0x94
+ },
+ {
+ .address = 0x4c,
+ .reg = 0x99
+ },
+ {
+ .address = 0x50,
+ .reg = 0x9e
+ },
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
+ int bit, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
+ int bit, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ if (on) {
+ data |= PWR_SOURCE_SELECT | BIT(bit);
+ } else {
+ data &= ~BIT(bit);
+ data |= PWR_SOURCE_SELECT;
+ }
+
+ if (regmap_write(regmap, reg, data))
+ return -EIO;
+ return 0;
+}
+
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ int temp_l, temp_h;
+
+ /*
+ * Raw temperature value is 10bits: 8bits in reg
+ * and 2bits in reg-1: bit0,1
+ */
+ if (regmap_read(regmap, reg, &temp_l) ||
+ regmap_read(regmap, reg - 1, &temp_h))
+ return -EIO;
+
+ return temp_l | (temp_h & 0x3) << 8;
+}
+
+static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+ return regmap_write(regmap, reg, raw) ||
+ regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
+}
+
+static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+ int pen;
+
+ if (regmap_read(regmap, reg, &pen))
+ return -EIO;
+ *value = pen >> 7;
+ return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+ int reg, int enable)
+{
+ int alert0;
+
+ /* Update to policy enable bit requires unlocking a0lock */
+ if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+ return -EIO;
+
+ /* restore alert0 */
+ if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+ return -EIO;
+
+ return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+ .get_power = intel_crc_pmic_get_power,
+ .update_power = intel_crc_pmic_update_power,
+ .get_raw_temp = intel_crc_pmic_get_raw_temp,
+ .update_aux = intel_crc_pmic_update_aux,
+ .get_policy = intel_crc_pmic_get_policy,
+ .update_policy = intel_crc_pmic_update_policy,
+ .power_table = power_table,
+ .power_table_count= ARRAY_SIZE(power_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ return intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+ &intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+ .probe = intel_crc_pmic_opregion_probe,
+ .driver = {
+ .name = "crystal_cove_region",
+ },
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = gpio_resources,
},
+ {
+ .name = "crystal_cove_region",
+ },
};
static struct regmap_config crystal_cove_regmap_config = {