[v7,0/3] arm64: dts: meson: add dts/bindings for SmartLabs SML-5442TW

Message

Christian Hewitt March 12, 2020, 4:38 a.m. UTC

This series adds new bindings and a device-tree file for the Smartlabs
SML-5442TW set-top box. The original attempt [1] was 15-months ago but
nothing has really changed apart from a change to yaml bindings.

The QCA9377 BT device does not have bindings and early experiments to add
them are partially successful but need further work. I have dropped the
gpio-hog from the device-tree and will submit changes to add BT once the
supporting bits exist elsewhere in the kernel.

v7 - update gpio-led nodes
   - remove gpio-hog for BT enable
   - add bindings acks from Rob

v6 - removed audio nodes again

v5 - typo in card name

v4 - typos/corrections from Andreas
   - convert to yaml bindings
   - add sound node back
   - confirmed gpio-hog is necessary

v3 - change to Smartlabs LLC
   - removed sound node

v2 - removed audio nodes
   - changes soundcard name to "meson-gx-audio"
   - added missing uart-has-rtscts;

[1] https://patchwork.kernel.org/cover/10674939/

Christian Hewitt (3):
  dt-bindings: add vendor prefix for SmartLabs LLC
  dt-bindings: arm: amlogic: add support for the SmartLabs SML-5442TW
  arm64: dts: meson: add support for the SmartLabs SML-5442TW

 Documentation/devicetree/bindings/arm/amlogic.yaml |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 284 +++++++++++++++++++++
 4 files changed, 288 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts