mbox series

[PATCHv1,0/3] Add Reset controller to Ethernet PHY

Message ID 20210729201100.3994-1-linux.amoon@gmail.com (mailing list archive)
Headers show
Series Add Reset controller to Ethernet PHY | expand

Message

Anand Moon July 29, 2021, 8:10 p.m. UTC 
It is being observed some time the Ethernet interface
will not send / recive any packet after reboot.

Earlier I had submitted Ethernet reset ID patch
but it did not resolve it issue much, Adding new 
reset controller of the Ethernet PHY for Amlogic SoC
could help resolve the issue.

Thanks
-Anand

Anand Moon (3):
  arm64: dts: amlogic: add missing ethernet reset ID
  ARM: dts: meson: Use new reset id for reset controller
  net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy

 arch/arm/boot/dts/meson8b.dtsi                |  2 +-
 arch/arm/boot/dts/meson8m2.dtsi               |  2 +-
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |  2 ++
 .../boot/dts/amlogic/meson-g12-common.dtsi    |  2 ++
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi     |  3 +++
 .../ethernet/stmicro/stmmac/dwmac-meson8b.c   | 20 +++++++++++++++++++
 6 files changed, 29 insertions(+), 2 deletions(-)

Comments

Martin Blumenstingl Aug. 3, 2021, 8:41 p.m. UTC | #1 
Hi Anand,

On Thu, Jul 29, 2021 at 10:11 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> It is being observed some time the Ethernet interface
> will not send / recive any packet after reboot.
>
> Earlier I had submitted Ethernet reset ID patch
> but it did not resolve it issue much, Adding new
> reset controller of the Ethernet PHY for Amlogic SoC
> could help resolve the issue.
nowhere in this series you are addressing the issue from [0]
Some more comments in the individual patch


Best regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/amlogic?id=19f6fe976a61f9afc289b062b7ef67f99b72e7b9