mbox series

[v1,0/5] arm64: meson: support Amlogic A1 USB OTG controller

Message ID 20230414152423.19842-1-ddrokosov@sberdevices.ru (mailing list archive)
Headers show
Series arm64: meson: support Amlogic A1 USB OTG controller | expand

Message

Dmitry Rokosov April 14, 2023, 3:24 p.m. UTC 
This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/

Dmitry Rokosov (5):
  phy: amlogic: during USB PHY clkin obtaining, enable it
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     |  2 +-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            |  2 +-
 5 files changed, 83 insertions(+), 2 deletions(-)