| Message ID | 1476890480-8884-3-git-send-email-jbrunet@baylibre.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Wed, Oct 19, 2016 at 05:21:13PM +0200, Jerome Brunet wrote: > > This commit adds the device tree bindings description for Amlogic's GPIO > interrupt controller available on the meson8, meson8b and gxbb SoC families > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > Rob, I did not include the Ack you gave for the RFC as bindings have slightly > changed. Only the interrupt property has be removed following a discussion I > had with Marc As Mark R already said, you should keep the interrupts property.
On Wed, Oct 26, 2016 at 04:42:35PM -0500, Rob Herring wrote: > On Wed, Oct 19, 2016 at 05:21:13PM +0200, Jerome Brunet wrote: > > > > This commit adds the device tree bindings description for Amlogic's GPIO > > interrupt controller available on the meson8, meson8b and gxbb SoC families > > > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > > --- > > Rob, I did not include the Ack you gave for the RFC as bindings have slightly > > changed. Only the interrupt property has be removed following a discussion I > > had with Marc > > As Mark R already said, you should keep the interrupts property. To be clear, the interrupt routing should be described *somehow*, though I don't think the generic interrupts property is correct, as this is an interrupt *router*, i.e. this device doesn't own the interrupt, it just joins two parts of the line together (and so flags are meaningless). Thanks, Mark.
On Thu, 2016-10-27 at 10:32 +0100, Mark Rutland wrote: > On Wed, Oct 26, 2016 at 04:42:35PM -0500, Rob Herring wrote: > > > > On Wed, Oct 19, 2016 at 05:21:13PM +0200, Jerome Brunet wrote: > > > > > > > > > This commit adds the device tree bindings description for > > > Amlogic's GPIO > > > interrupt controller available on the meson8, meson8b and gxbb > > > SoC families > > > > > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > > > --- > > > Rob, I did not include the Ack you gave for the RFC as bindings > > > have slightly > > > changed. Only the interrupt property has be removed following a > > > discussion I > > > had with Marc > > > > As Mark R already said, you should keep the interrupts property. > > To be clear, the interrupt routing should be described *somehow*, > though > I don't think the generic interrupts property is correct, as this is > an > interrupt *router*, i.e. this device doesn't own the interrupt, it > just > joins two parts of the line together (and so flags are meaningless). > > Thanks, > Mark. Indeed Mark, I already rewritten the driver taking Marc's comment into account. There will be 2 properties added to the DT: - meson,upstream-interrupts : an array with the 8 gic interrupt used as output of the controller - meson,num-input-mux : the number of inputs (pads) available to the muxes I'm looking for solution to the "create mapping" issue we have in pinctrl (patch 4) before posting a v3. If you think these properties should be different, feel free to tell me now. Thx Jerome
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt new file mode 100644 index 000000000000..2464d9a0865d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -0,0 +1,31 @@ +Amlogic meson GPIO interrupt controller + +Meson SoCs contains an interrupt controller which is able watch the SoC pads +and generate an interrupt on edges or level. The controller is essentially a +256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge +or level and polarity. We don’t expose all 256 mux inputs because the +documentation shows that upper part is not mapped to any pad. The actual number +of interrupt exposed depends on the SoC. + +Required properties: + +- compatible : should be either + "amlogic,meson8-gpio-intc” for meson8 SoCs (AML7826MX) or + “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or + “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) +- interrupt-parent : a phandle to the GIC the interrupts are routed to. + Usually this is provided at the root level of the device tree as it is + common to most of the SoC +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + +Example: + +gpio_interrupt: interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; +};
This commit adds the device tree bindings description for Amlogic's GPIO interrupt controller available on the meson8, meson8b and gxbb SoC families Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- Rob, I did not include the Ack you gave for the RFC as bindings have slightly changed. Only the interrupt property has be removed following a discussion I had with Marc .../amlogic,meson-gpio-intc.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt