| Message ID | 1546592917-27846-1-git-send-email-clabbe@baylibre.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header | expand |
On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote: > When building on x86, I got the following build failure: Hi, what tree are you testing on and which config ? Thanks, Lorenzo > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’: > drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration] > gpiod_set_value_cansleep(mp->reset_gpio, 0); > ^~~~~~~~~~~~~~~~~~~~~~~~ > gpio_set_value_cansleep > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’: > drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration] > mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > ^~~~~~~~~~~~~~ > devm_gpio_free > drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’? > mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > ^~~~~~~~~~~~~ > GPIOF_INIT_LOW > > This is due to the missing linux/gpio/consumer.h header > > Signed-off-by: Corentin Labbe <clabbe@baylibre.com> > --- > drivers/pci/controller/dwc/pci-meson.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c > index 241ebe0c4505..e35e9eaa50ee 100644 > --- a/drivers/pci/controller/dwc/pci-meson.c > +++ b/drivers/pci/controller/dwc/pci-meson.c > @@ -8,6 +8,7 @@ > > #include <linux/clk.h> > #include <linux/delay.h> > +#include <linux/gpio/consumer.h> > #include <linux/of_device.h> > #include <linux/of_gpio.h> > #include <linux/pci.h> > -- > 2.19.2 >
On Fri, Jan 04, 2019 at 10:30:25AM +0000, Lorenzo Pieralisi wrote: > On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote: > > When building on x86, I got the following build failure: > > Hi, > > what tree are you testing on and which config ? I use the next-20190102 tree The config can be found at http://kernel.montjoie.ovh/configs/x86 Regards > > Thanks, > Lorenzo > > > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’: > > drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration] > > gpiod_set_value_cansleep(mp->reset_gpio, 0); > > ^~~~~~~~~~~~~~~~~~~~~~~~ > > gpio_set_value_cansleep > > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’: > > drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration] > > mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > > ^~~~~~~~~~~~~~ > > devm_gpio_free > > drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’? > > mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > > ^~~~~~~~~~~~~ > > GPIOF_INIT_LOW > > > > This is due to the missing linux/gpio/consumer.h header > > > > Signed-off-by: Corentin Labbe <clabbe@baylibre.com> > > --- > > drivers/pci/controller/dwc/pci-meson.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c > > index 241ebe0c4505..e35e9eaa50ee 100644 > > --- a/drivers/pci/controller/dwc/pci-meson.c > > +++ b/drivers/pci/controller/dwc/pci-meson.c > > @@ -8,6 +8,7 @@ > > > > #include <linux/clk.h> > > #include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > #include <linux/of_device.h> > > #include <linux/of_gpio.h> > > #include <linux/pci.h> > > -- > > 2.19.2 > >
On Fri, Jan 04, 2019 at 11:36:26AM +0100, LABBE Corentin wrote: > On Fri, Jan 04, 2019 at 10:30:25AM +0000, Lorenzo Pieralisi wrote: > > On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote: > > > When building on x86, I got the following build failure: > > > > Hi, > > > > what tree are you testing on and which config ? > > I use the next-20190102 tree > The config can be found at http://kernel.montjoie.ovh/configs/x86 Ok, right, it is a config that unfortunately the bots failed to test, I will pick this up and send it to Bjorn for -rc2 (given that the PCI tree is not in mainline yet). Thanks, Lorenzo
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index 241ebe0c4505..e35e9eaa50ee 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -8,6 +8,7 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pci.h>
When building on x86, I got the following build failure: drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’: drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(mp->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’: drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration] mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’? mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW This is due to the missing linux/gpio/consumer.h header Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- drivers/pci/controller/dwc/pci-meson.c | 1 + 1 file changed, 1 insertion(+)