| Message ID | 1582870346-74145-1-git-send-email-christianshewitt@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: meson: add thermal zones to gxl-s905x-khadas-vim | expand |
Hi, On 28/02/2020 07:12, Christian Hewitt wrote: > Add thermal zones to the VIM1 board, copying the zone config from the > existing VIM2 board. > > Suggested-by: Nick Xie <nick@khadas.com> > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 50 ++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > index 440bc23..2c198c4 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts > @@ -6,6 +6,7 @@ > /dts-v1/; > > #include <dt-bindings/input/input.h> > +#include <dt-bindings/thermal/thermal.h> > > #include "meson-gxl-s905x-p212.dtsi" > > @@ -63,6 +64,39 @@ > }; > }; > }; > + > + thermal-zones { > + cpu-thermal { > + polling-delay-passive = <250>; /* milliseconds */ > + polling-delay = <1000>; /* milliseconds */ > + > + thermal-sensors = <&scpi_sensors 0>; > + > + trips { > + cpu_alert0: cpu-alert0 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <2000>; /* millicelsius */ > + type = "active"; > + }; > + > + cpu_alert1: cpu-alert1 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <2000>; /* millicelsius */ > + type = "passive"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu_alert1>; > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + }; > }; > > &cec_AO { > @@ -72,6 +106,22 @@ > hdmi-phandle = <&hdmi_tx>; > }; > > +&cpu0 { > + #cooling-cells = <2>; > +}; > + > +&cpu1 { > + #cooling-cells = <2>; > +}; > + > +&cpu2 { > + #cooling-cells = <2>; > +}; > + > +&cpu3 { > + #cooling-cells = <2>; > +}; > + > &hdmi_tx { > status = "okay"; > pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > Following the g12a/g12b/sm1 work, this should go into the meson-gx.dtsi instead, with some bits in meson-gxm.dtsi to handle the second spu cluster. Neil
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 440bc23..2c198c4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "meson-gxl-s905x-p212.dtsi" @@ -63,6 +64,39 @@ }; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&scpi_sensors 0>; + + trips { + cpu_alert0: cpu-alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert1: cpu-alert1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; &cec_AO { @@ -72,6 +106,22 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
Add thermal zones to the VIM1 board, copying the zone config from the existing VIM2 board. Suggested-by: Nick Xie <nick@khadas.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+)