@@ -391,14 +391,33 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
FUNCTION(i2c_slave_ao),
};
+static struct meson_bank meson_gxbb_periphs_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
+ BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
+ BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
+ BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
+ BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
+ BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
+};
+
+static struct meson_bank meson_gxbb_aobus_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+};
+
struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
.name = "periphs-banks",
.pin_base = 14,
.groups = meson_gxbb_periphs_groups,
.funcs = meson_gxbb_periphs_functions,
+ .banks = meson_gxbb_periphs_banks,
.num_pins = 120,
.num_groups = ARRAY_SIZE(meson_gxbb_periphs_groups),
.num_funcs = ARRAY_SIZE(meson_gxbb_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks),
};
struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
@@ -406,9 +425,11 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
.pin_base = 0,
.groups = meson_gxbb_aobus_groups,
.funcs = meson_gxbb_aobus_functions,
+ .banks = meson_gxbb_aobus_banks,
.num_pins = 14,
.num_groups = ARRAY_SIZE(meson_gxbb_aobus_groups),
.num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions),
+ .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks),
};
static const struct udevice_id meson_gxbb_pinctrl_match[] = {
@@ -6,11 +6,14 @@
#include <common.h>
#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <fdt_support.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/sizes.h>
+#include <asm/gpio.h>
#include "pinctrl-meson.h"
@@ -135,12 +138,152 @@ static fdt_addr_t parse_address(int offset, const char *name, int na, int ns)
return fdt_translate_address((void *)gd->fdt_blob, offset, reg);
}
+static int meson_gpio_calc_reg_and_bit(struct udevice *dev, unsigned int offset,
+ enum meson_reg_type reg_type,
+ unsigned int *reg, unsigned int *bit)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ struct meson_bank *bank = NULL;
+ struct meson_reg_desc *desc;
+ unsigned int pin;
+ int i;
+
+ pin = priv->data->pin_base + offset;
+
+ for (i = 0; i < priv->data->num_banks; i++) {
+ if (pin >= priv->data->banks[i].first &&
+ pin <= priv->data->banks[i].last) {
+ bank = &priv->data->banks[i];
+ break;
+ }
+ }
+
+ if (!bank)
+ return -EINVAL;
+
+ desc = &bank->regs[reg_type];
+ *reg = desc->reg * 4;
+ *bit = desc->bit + pin - bank->first;
+
+ return 0;
+}
+
+static int meson_gpio_get(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_IN, ®, &bit);
+ if (ret)
+ return ret;
+
+ return !!(readl(priv->reg_gpio + reg) & BIT(bit));
+}
+
+static int meson_gpio_set(struct udevice *dev, unsigned int offset, int value)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_OUT, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), value ? BIT(bit) : 0);
+
+ return 0;
+}
+
+static int meson_gpio_get_direction(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit, val;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ val = readl(priv->reg_gpio + reg);
+
+ return (val & BIT(bit)) ? GPIOF_INPUT : GPIOF_OUTPUT;
+}
+
+static int meson_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 1);
+
+ return 0;
+}
+
+static int meson_gpio_direction_output(struct udevice *dev,
+ unsigned int offset, int value)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 0);
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_OUT, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), value ? BIT(bit) : 0);
+
+ return 0;
+}
+
+static int meson_gpio_probe(struct udevice *dev)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ struct gpio_dev_priv *uc_priv;
+
+ uc_priv = dev_get_uclass_priv(dev);
+ uc_priv->bank_name = priv->data->name;
+ uc_priv->gpio_count = priv->data->num_pins;
+
+ return 0;
+}
+
+static const struct dm_gpio_ops meson_gpio_ops = {
+ .set_value = meson_gpio_set,
+ .get_value = meson_gpio_get,
+ .get_function = meson_gpio_get_direction,
+ .direction_input = meson_gpio_direction_input,
+ .direction_output = meson_gpio_direction_output,
+};
+
+static struct driver meson_gpio_driver = {
+ .name = "meson-gpio",
+ .id = UCLASS_GPIO,
+ .probe = meson_gpio_probe,
+ .ops = &meson_gpio_ops,
+};
+
int meson_pinctrl_probe(struct udevice *dev)
{
struct meson_pinctrl *priv = dev_get_priv(dev);
+ struct uclass_driver *drv;
+ struct udevice *gpio_dev;
fdt_addr_t addr;
int node, gpio = -1, len;
int na, ns;
+ char *name;
na = fdt_address_cells(gd->fdt_blob, dev_of_offset(dev->parent));
if (na < 1) {
@@ -168,12 +311,32 @@ int meson_pinctrl_probe(struct udevice *dev)
addr = parse_address(gpio, "mux", na, ns);
if (addr == FDT_ADDR_T_NONE) {
- debug("mux not found\n");
+ debug("mux address not found\n");
return -EINVAL;
}
-
priv->reg_mux = (void __iomem *)addr;
+
+ addr = parse_address(gpio, "gpio", na, ns);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("gpio address not found\n");
+ return -EINVAL;
+ }
+ priv->reg_gpio = (void __iomem *)addr;
priv->data = (struct meson_pinctrl_data *)dev_get_driver_data(dev);
+ /* Lookup GPIO driver */
+ drv = lists_uclass_lookup(UCLASS_GPIO);
+ if (!drv) {
+ puts("Cannot find GPIO driver\n");
+ return -ENOENT;
+ }
+
+ name = calloc(1, 32);
+ sprintf(name, "meson-gpio");
+
+ /* Create child device UCLASS_GPIO and bind it */
+ device_bind(dev, &meson_gpio_driver, name, NULL, gpio, &gpio_dev);
+ dev_set_of_offset(gpio_dev, gpio);
+
return 0;
}
@@ -28,15 +28,64 @@ struct meson_pinctrl_data {
const char *name;
struct meson_pmx_group *groups;
struct meson_pmx_func *funcs;
+ struct meson_bank *banks;
unsigned int pin_base;
unsigned int num_pins;
unsigned int num_groups;
unsigned int num_funcs;
+ unsigned int num_banks;
};
struct meson_pinctrl {
struct meson_pinctrl_data *data;
void __iomem *reg_mux;
+ void __iomem *reg_gpio;
+};
+
+/**
+ * struct meson_reg_desc - a register descriptor
+ *
+ * @reg: register offset in the regmap
+ * @bit: bit index in register
+ *
+ * The structure describes the information needed to control pull,
+ * pull-enable, direction, etc. for a single pin
+ */
+struct meson_reg_desc {
+ unsigned int reg;
+ unsigned int bit;
+};
+
+/**
+ * enum meson_reg_type - type of registers encoded in @meson_reg_desc
+ */
+enum meson_reg_type {
+ REG_PULLEN,
+ REG_PULL,
+ REG_DIR,
+ REG_OUT,
+ REG_IN,
+ NUM_REG,
+};
+
+/**
+ * struct meson bank
+ *
+ * @name: bank name
+ * @first: first pin of the bank
+ * @last: last pin of the bank
+ * @regs: array of register descriptors
+ *
+ * A bank represents a set of pins controlled by a contiguous set of
+ * bits in the domain registers. The structure specifies which bits in
+ * the regmap control the different functionalities. Each member of
+ * the @regs array refers to the first pin of the bank.
+ */
+struct meson_bank {
+ const char *name;
+ unsigned int first;
+ unsigned int last;
+ struct meson_reg_desc regs[NUM_REG];
};
#define PIN(x, b) (b + x)
@@ -65,6 +114,20 @@ struct meson_pinctrl {
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
+#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+ { \
+ .name = n, \
+ .first = f, \
+ .last = l, \
+ .regs = { \
+ [REG_PULLEN] = { per, peb }, \
+ [REG_PULL] = { pr, pb }, \
+ [REG_DIR] = { dr, db }, \
+ [REG_OUT] = { or, ob }, \
+ [REG_IN] = { ir, ib }, \
+ }, \
+ }
+
#define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
extern const struct pinctrl_ops meson_pinctrl_ops;
This commit adds GPIO support to the Amlogic Meson pin controller driver, based on code from Linux kernel. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 21 ++++ drivers/pinctrl/meson/pinctrl-meson.c | 167 ++++++++++++++++++++++++++++- drivers/pinctrl/meson/pinctrl-meson.h | 63 +++++++++++ 3 files changed, 249 insertions(+), 2 deletions(-)