@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -155,6 +156,19 @@
};
};
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ status = "disabled";
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
reg = <0x0 0xffc01000 0 0x1000>,
@@ -215,6 +229,46 @@
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
+ eth_rgmii_x_pins: eth-x-rgmii {
+ mux {
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
+
+ eth_rgmii_y_pins: eth-y-rgmii {
+ mux {
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
+
pwm_a_a_pins: pwm_a_a {
mux {
groups = "pwm_a_a";