Message ID | 20180105095621.196472-3-yixun.lan@amlogic.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote: > The address space range is actually 0x18, fixed here. Isn't it the same for other meson SoC ? If they are compatible, it should. Could you please re-submit this change addressing all the required platforms ? > > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 1c6002b3fe34..9636a7c5f6ed 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -143,14 +143,14 @@ > > uart_A: serial@24000 { > compatible = "amlogic,meson-gx-uart"; > - reg = <0x0 0x24000 0x0 0x14>; > + reg = <0x0 0x24000 0x0 0x18>; > interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; > status = "disabled"; > }; > > uart_B: serial@23000 { > compatible = "amlogic,meson-gx-uart"; > - reg = <0x0 0x23000 0x0 0x14>; > + reg = <0x0 0x23000 0x0 0x18>; > interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; > status = "disabled"; > };
On 01/05/2018 06:30 PM, Jerome Brunet wrote: > On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote: >> The address space range is actually 0x18, fixed here. > > Isn't it the same for other meson SoC ? If they are compatible, it should. > Could you please re-submit this change addressing all the required platforms ? > sure sorry, I was in hurry to send the patch set without do a full tree check.. you right, the fix should also apply to other SoCs, I will fold them into this patch together, thanks for raising the idea. >> >> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi >> index 1c6002b3fe34..9636a7c5f6ed 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi >> @@ -143,14 +143,14 @@ >> >> uart_A: serial@24000 { >> compatible = "amlogic,meson-gx-uart"; >> - reg = <0x0 0x24000 0x0 0x14>; >> + reg = <0x0 0x24000 0x0 0x18>; >> interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; >> status = "disabled"; >> }; >> >> uart_B: serial@23000 { >> compatible = "amlogic,meson-gx-uart"; >> - reg = <0x0 0x23000 0x0 0x14>; >> + reg = <0x0 0x23000 0x0 0x18>; >> interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; >> status = "disabled"; >> }; > > . >
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 1c6002b3fe34..9636a7c5f6ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -143,14 +143,14 @@ uart_A: serial@24000 { compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x14>; + reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@23000 { compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x14>; + reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; };
The address space range is actually 0x18, fixed here. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)