| Message ID | 20180312214840.rnuflajm6n6kozxt@gofer.mess.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Mon, Mar 12, 2018 at 09:48:40PM +0000, Sean Young wrote: > A timeout of 200ms is much longer than necessary, and delays the decoding > decoding of a single scancode and the last scancode when a button is being > held. This makes the remote seem sluggish. > > If the min_timeout and max_timeout values are set, the timeout is > configurable via the LIRC_SET_REC_TIMEOUT ioctl. > > Signed-off-by: Sean Young <sean@mess.org> Tested-by: Matthias Reichl <hias@horus.com> Thanks a lot, this is working fine! so long, Hias > --- > drivers/media/rc/meson-ir.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c > index 64b0aa4f4db7..f449b35d25e7 100644 > --- a/drivers/media/rc/meson-ir.c > +++ b/drivers/media/rc/meson-ir.c > @@ -144,7 +144,9 @@ static int meson_ir_probe(struct platform_device *pdev) > ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY; > ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; > ir->rc->rx_resolution = US_TO_NS(MESON_TRATE); > - ir->rc->timeout = MS_TO_NS(200); > + ir->rc->min_timeout = 1; > + ir->rc->timeout = IR_DEFAULT_TIMEOUT; > + ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT; > ir->rc->driver_name = DRIVER_NAME; > > spin_lock_init(&ir->lock); > -- > 2.14.3 >
diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c index 64b0aa4f4db7..f449b35d25e7 100644 --- a/drivers/media/rc/meson-ir.c +++ b/drivers/media/rc/meson-ir.c @@ -144,7 +144,9 @@ static int meson_ir_probe(struct platform_device *pdev) ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY; ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; ir->rc->rx_resolution = US_TO_NS(MESON_TRATE); - ir->rc->timeout = MS_TO_NS(200); + ir->rc->min_timeout = 1; + ir->rc->timeout = IR_DEFAULT_TIMEOUT; + ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT; ir->rc->driver_name = DRIVER_NAME; spin_lock_init(&ir->lock);
A timeout of 200ms is much longer than necessary, and delays the decoding decoding of a single scancode and the last scancode when a button is being held. This makes the remote seem sluggish. If the min_timeout and max_timeout values are set, the timeout is configurable via the LIRC_SET_REC_TIMEOUT ioctl. Signed-off-by: Sean Young <sean@mess.org> --- drivers/media/rc/meson-ir.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)