@@ -54,6 +54,7 @@ config SND_MESON_AXG_SOUND_CARD
imply SND_MESON_AXG_TDMIN
imply SND_MESON_AXG_TDMOUT
imply SND_MESON_AXG_SPDIFOUT
+ imply SND_MESON_AXG_SPDIFIN
imply SND_MESON_AXG_PDM
help
Select Y or M to add support for the AXG SoC sound card
@@ -67,6 +68,13 @@ config SND_MESON_AXG_SPDIFOUT
Select Y or M to add support for SPDIF output serializer embedded
in the Amlogic AXG SoC family
+config SND_MESON_AXG_SPDIFIN
+ tristate "Amlogic AXG SPDIF Input Support"
+ imply SND_SOC_SPDIF
+ help
+ Select Y or M to add support for SPDIF input embedded
+ in the Amlogic AXG SoC family
+
config SND_MESON_AXG_PDM
tristate "Amlogic AXG PDM Input Support"
imply SND_SOC_DMIC
@@ -74,5 +82,4 @@ config SND_MESON_AXG_PDM
help
Select Y or M to add support for PDM input embedded
in the Amlogic AXG SoC family
-
endmenu
@@ -8,6 +8,7 @@ snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o
snd-soc-meson-axg-tdmin-objs := axg-tdmin.o
snd-soc-meson-axg-tdmout-objs := axg-tdmout.o
snd-soc-meson-axg-sound-card-objs := axg-card.o
+snd-soc-meson-axg-spdifin-objs := axg-spdifin.o
snd-soc-meson-axg-spdifout-objs := axg-spdifout.o
snd-soc-meson-axg-pdm-objs := axg-pdm.o
@@ -19,5 +20,6 @@ obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o
obj-$(CONFIG_SND_MESON_AXG_TDMIN) += snd-soc-meson-axg-tdmin.o
obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o
obj-$(CONFIG_SND_MESON_AXG_SOUND_CARD) += snd-soc-meson-axg-sound-card.o
+obj-$(CONFIG_SND_MESON_AXG_SPDIFIN) += snd-soc-meson-axg-spdifin.o
obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o
obj-$(CONFIG_SND_MESON_AXG_PDM) += snd-soc-meson-axg-pdm.o
new file mode 100644
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2018 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/pcm_params.h>
+
+#define SPDIFIN_CTRL0 0x00
+#define SPDIFIN_CTRL0_EN BIT(31)
+#define SPDIFIN_CTRL0_RST_OUT BIT(29)
+#define SPDIFIN_CTRL0_RST_IN BIT(28)
+#define SPDIFIN_CTRL0_WIDTH_SEL BIT(24)
+#define SPDIFIN_CTRL0_STATUS_CH_SHIFT 11
+#define SPDIFIN_CTRL0_STATUS_SEL GENMASK(10, 8)
+#define SPDIFIN_CTRL0_SRC_SEL GENMASK(5, 4)
+#define SPDIFIN_CTRL0_CHK_VALID BIT(3)
+#define SPDIFIN_CTRL1 0x04
+#define SPDIFIN_CTRL1_BASE_TIMER GENMASK(19, 0)
+#define SPDIFIN_CTRL1_IRQ_MASK GENMASK(27, 20)
+#define SPDIFIN_CTRL2 0x08
+#define SPDIFIN_THRES_PER_REG 3
+#define SPDIFIN_THRES_WIDTH 10
+#define SPDIFIN_CTRL3 0x0c
+#define SPDIFIN_CTRL4 0x10
+#define SPDIFIN_TIMER_PER_REG 4
+#define SPDIFIN_TIMER_WIDTH 8
+#define SPDIFIN_CTRL5 0x14
+#define SPDIFIN_CTRL6 0x18
+#define SPDIFIN_STAT0 0x1c
+#define SPDIFIN_STAT0_MODE GENMASK(30, 28)
+#define SPDIFIN_STAT0_MAXW GENMASK(17, 8)
+#define SPDIFIN_STAT0_IRQ GENMASK(7, 0)
+#define SPDIFIN_IRQ_MODE_CHANGED BIT(2)
+#define SPDIFIN_STAT1 0x20
+#define SPDIFIN_STAT2 0x24
+#define SPDIFIN_MUTE_VAL 0x28
+
+#define SPDIFIN_MODE_NUM 7
+
+struct axg_spdifin_cfg {
+ const unsigned int *mode_rates;
+ unsigned int ref_rate;
+};
+
+struct axg_spdifin {
+ const struct axg_spdifin_cfg *conf;
+ struct regmap *map;
+ struct clk *refclk;
+ struct clk *pclk;
+};
+
+/*
+ * TODO:
+ * It would have been nice to check the actual rate against the sample rate
+ * requested in hw_params(). Unfortunately, I was not able to make the mode
+ * detection and IRQ work reliably:
+ *
+ * 1. IRQs are generated on mode change only, so there is no notification
+ * on transition between no signal and mode 0 (32kHz).
+ * 2. Mode detection very often has glitches, and may detects the
+ * lowest or the highest mode before zeroing in on the actual mode.
+ *
+ * This makes calling snd_pcm_stop() difficult to get right. Even notifying
+ * the kcontrol would be very unreliable at this point.
+ * Let's keep things simple until the magic spell that makes this work is
+ * found.
+ */
+
+static unsigned int axg_spdifin_get_rate(struct axg_spdifin *priv)
+{
+ unsigned int stat, mode, rate = 0;
+
+ regmap_read(priv->map, SPDIFIN_STAT0, &stat);
+ mode = FIELD_GET(SPDIFIN_STAT0_MODE, stat);
+
+ /*
+ * If max width is zero, we are not capturing anything.
+ * Also Sometimes, when the capture is on but there is no data,
+ * mode is SPDIFIN_MODE_NUM, but not always ...
+ */
+ if (FIELD_GET(SPDIFIN_STAT0_MAXW, stat) &&
+ mode < SPDIFIN_MODE_NUM)
+ rate = priv->conf->mode_rates[mode];
+
+ return rate;
+}
+
+static int axg_spdifin_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+
+ /* Apply both reset */
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_RST_OUT |
+ SPDIFIN_CTRL0_RST_IN,
+ 0);
+
+ /* Clear out reset before in reset */
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_RST_OUT, SPDIFIN_CTRL0_RST_OUT);
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_RST_IN, SPDIFIN_CTRL0_RST_IN);
+
+ return 0;
+}
+
+static int axg_spdifin_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+ int ret;
+
+ ret = clk_prepare_enable(priv->refclk);
+ if (ret) {
+ dev_err(dai->dev,
+ "failed to enable spdifin reference clock\n");
+ return ret;
+ }
+
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN,
+ SPDIFIN_CTRL0_EN);
+
+ return 0;
+}
+
+static void axg_spdifin_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0);
+ clk_disable_unprepare(priv->refclk);
+}
+
+static void axg_spdifin_write_mode_param(struct regmap *map, int mode,
+ unsigned int val,
+ unsigned int num_per_reg,
+ unsigned int base_reg,
+ unsigned int width)
+{
+ unsigned int offset = mode, rem;
+ unsigned int reg, shift;
+
+ rem = do_div(offset, num_per_reg);
+
+ reg = offset * regmap_get_reg_stride(map) + base_reg;
+ shift = width * (num_per_reg - 1 - rem);
+
+ regmap_update_bits(map, reg, GENMASK(width - 1, 0) << shift,
+ val << shift);
+}
+
+static void axg_spdifin_write_timer(struct regmap *map, int mode,
+ unsigned int val)
+{
+ axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_TIMER_PER_REG,
+ SPDIFIN_CTRL4, SPDIFIN_TIMER_WIDTH);
+}
+
+static void axg_spdifin_write_threshold(struct regmap *map, int mode,
+ unsigned int val)
+{
+ axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_THRES_PER_REG,
+ SPDIFIN_CTRL2, SPDIFIN_THRES_WIDTH);
+}
+
+static unsigned int axg_spdifin_mode_timer(struct axg_spdifin *priv,
+ int mode,
+ unsigned int rate)
+{
+ /*
+ * Number of period of the reference clock during a period of the
+ * input signal reference clock
+ */
+ return rate / (128 * priv->conf->mode_rates[mode]);
+}
+
+static int axg_spdifin_sample_mode_config(struct snd_soc_dai *dai,
+ struct axg_spdifin *priv)
+{
+ unsigned int rate, t_next;
+ int ret, i = SPDIFIN_MODE_NUM - 1;
+
+ /* Set spdif input reference clock */
+ ret = clk_set_rate(priv->refclk, priv->conf->ref_rate);
+ if (ret) {
+ dev_err(dai->dev, "reference clock rate set failed\n");
+ return ret;
+ }
+
+ /*
+ * The rate actually set might be slightly different, get
+ * the actual rate for the following mode calculation
+ */
+ rate = clk_get_rate(priv->refclk);
+
+ /* HW will update mode every 1ms */
+ regmap_update_bits(priv->map, SPDIFIN_CTRL1,
+ SPDIFIN_CTRL1_BASE_TIMER,
+ FIELD_PREP(SPDIFIN_CTRL1_BASE_TIMER, rate / 1000));
+
+ /* Threshold based on the minimum width between two edges */
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_WIDTH_SEL, SPDIFIN_CTRL0_WIDTH_SEL);
+
+ /* Calculate the last timer which has no threshold */
+ t_next = axg_spdifin_mode_timer(priv, i, rate);
+ axg_spdifin_write_timer(priv->map, i, t_next);
+
+ do {
+ unsigned int t;
+
+ i -= 1;
+
+ /* Calculate the timer */
+ t = axg_spdifin_mode_timer(priv, i, rate);
+
+ /* Set the timer value */
+ axg_spdifin_write_timer(priv->map, i, t);
+
+ /* Set the threshold value */
+ axg_spdifin_write_threshold(priv->map, i, t + t_next);
+
+ /* Save the current timer for the next threshold calculation */
+ t_next = t;
+
+ } while (i > 0);
+
+ return 0;
+}
+
+static int axg_spdifin_dai_probe(struct snd_soc_dai *dai)
+{
+ struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+ int ret;
+
+ ret = clk_prepare_enable(priv->pclk);
+ if (ret) {
+ dev_err(dai->dev, "failed to enable pclk\n");
+ return ret;
+ }
+
+ ret = axg_spdifin_sample_mode_config(dai, priv);
+ if (ret) {
+ dev_err(dai->dev, "mode configuration failed\n");
+ clk_disable_unprepare(priv->pclk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int axg_spdifin_dai_remove(struct snd_soc_dai *dai)
+{
+ struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+
+ clk_disable_unprepare(priv->pclk);
+ return 0;
+}
+
+static const struct snd_soc_dai_ops axg_spdifin_ops = {
+ .prepare = axg_spdifin_prepare,
+ .startup = axg_spdifin_startup,
+ .shutdown = axg_spdifin_shutdown,
+};
+
+static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+
+ return 0;
+}
+
+static int axg_spdifin_get_status_mask(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int i;
+
+ for (i = 0; i < 24; i++)
+ ucontrol->value.iec958.status[i] = 0xff;
+
+ return 0;
+}
+
+static int axg_spdifin_get_status(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
+ struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
+ int i, j;
+
+ for (i = 0; i < 6; i++) {
+ unsigned int val;
+
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_STATUS_SEL,
+ FIELD_PREP(SPDIFIN_CTRL0_STATUS_SEL, i));
+
+ regmap_read(priv->map, SPDIFIN_STAT1, &val);
+
+ for (j = 0; j < 4; j++) {
+ unsigned int offset = i * 4 + j;
+
+ ucontrol->value.iec958.status[offset] =
+ (val >> (j * 8)) & 0xff;
+ }
+ }
+
+ return 0;
+}
+
+#define AXG_SPDIFIN_IEC958_MASK \
+ { \
+ .access = SNDRV_CTL_ELEM_ACCESS_READ, \
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK), \
+ .info = axg_spdifin_iec958_info, \
+ .get = axg_spdifin_get_status_mask, \
+ }
+
+#define AXG_SPDIFIN_IEC958_STATUS \
+ { \
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE), \
+ .info = axg_spdifin_iec958_info, \
+ .get = axg_spdifin_get_status, \
+ }
+
+static const char * const spdifin_chsts_src_texts[] = {
+ "A", "B",
+};
+
+static SOC_ENUM_SINGLE_DECL(axg_spdifin_chsts_src_enum, SPDIFIN_CTRL0,
+ SPDIFIN_CTRL0_STATUS_CH_SHIFT,
+ spdifin_chsts_src_texts);
+
+static int axg_spdifin_rate_lock_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 192000;
+
+ return 0;
+}
+
+static int axg_spdifin_rate_lock_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
+ struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
+
+ ucontrol->value.integer.value[0] = axg_spdifin_get_rate(priv);
+
+ return 0;
+}
+
+#define AXG_SPDIFIN_LOCK_RATE(xname) \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
+ .get = axg_spdifin_rate_lock_get, \
+ .info = axg_spdifin_rate_lock_info, \
+ .name = xname, \
+ }
+
+static const struct snd_kcontrol_new axg_spdifin_controls[] = {
+ AXG_SPDIFIN_LOCK_RATE("Capture Rate Lock"),
+ SOC_DOUBLE("Capture Switch", SPDIFIN_CTRL0, 7, 6, 1, 1),
+ SOC_ENUM(SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Src",
+ axg_spdifin_chsts_src_enum),
+ AXG_SPDIFIN_IEC958_MASK,
+ AXG_SPDIFIN_IEC958_STATUS,
+};
+
+static const struct snd_soc_component_driver axg_spdifin_component_drv = {
+ .controls = axg_spdifin_controls,
+ .num_controls = ARRAY_SIZE(axg_spdifin_controls),
+};
+
+static const struct regmap_config axg_spdifin_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = SPDIFIN_MUTE_VAL,
+};
+
+static const unsigned int axg_spdifin_mode_rates[SPDIFIN_MODE_NUM] = {
+ 32000, 44100, 48000, 88200, 96000, 176400, 192000,
+};
+
+static const struct axg_spdifin_cfg axg_cfg = {
+ .mode_rates = axg_spdifin_mode_rates,
+ .ref_rate = 333333333,
+};
+
+static const struct of_device_id axg_spdifin_of_match[] = {
+ {
+ .compatible = "amlogic,axg-spdifin",
+ .data = &axg_cfg,
+ }, {}
+};
+MODULE_DEVICE_TABLE(of, axg_spdifin_of_match);
+
+static struct snd_soc_dai_driver *
+axg_spdifin_get_dai_drv(struct device *dev, struct axg_spdifin *priv)
+{
+ struct snd_soc_dai_driver *drv;
+ int i;
+
+ drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+ if (!drv)
+ return ERR_PTR(-ENOMEM);
+
+ drv->name = "SPDIF Input";
+ drv->ops = &axg_spdifin_ops;
+ drv->probe = axg_spdifin_dai_probe;
+ drv->remove = axg_spdifin_dai_remove;
+ drv->capture.stream_name = "Capture";
+ drv->capture.channels_min = 1;
+ drv->capture.channels_max = 2;
+ drv->capture.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE;
+
+ for (i = 0; i < SPDIFIN_MODE_NUM; i++) {
+ unsigned int rb =
+ snd_pcm_rate_to_rate_bit(priv->conf->mode_rates[i]);
+
+ if (rb == SNDRV_PCM_RATE_KNOT)
+ return ERR_PTR(-EINVAL);
+
+ drv->capture.rates |= rb;
+ }
+
+ return drv;
+}
+
+static int axg_spdifin_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct axg_spdifin *priv;
+ struct snd_soc_dai_driver *dai_drv;
+ struct resource *res;
+ void __iomem *regs;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, priv);
+
+ priv->conf = of_device_get_match_data(dev);
+ if (!priv->conf) {
+ dev_err(dev, "failed to match device\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifin_regmap_cfg);
+ if (IS_ERR(priv->map)) {
+ dev_err(dev, "failed to init regmap: %ld\n",
+ PTR_ERR(priv->map));
+ return PTR_ERR(priv->map);
+ }
+
+ priv->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(priv->pclk)) {
+ ret = PTR_ERR(priv->pclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get pclk: %d\n", ret);
+ return ret;
+ }
+
+ priv->refclk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(priv->refclk)) {
+ ret = PTR_ERR(priv->refclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get mclk: %d\n", ret);
+ return ret;
+ }
+
+ dai_drv = axg_spdifin_get_dai_drv(dev, priv);
+ if (IS_ERR(dai_drv)) {
+ dev_err(dev, "failed to get dai driver: %ld\n",
+ PTR_ERR(dai_drv));
+ return PTR_ERR(dai_drv);
+ }
+
+ return devm_snd_soc_register_component(dev, &axg_spdifin_component_drv,
+ dai_drv, 1);
+}
+
+static struct platform_driver axg_spdifin_pdrv = {
+ .probe = axg_spdifin_probe,
+ .driver = {
+ .name = "axg-spdifin",
+ .of_match_table = axg_spdifin_of_match,
+ },
+};
+module_platform_driver(axg_spdifin_pdrv);
+
+MODULE_DESCRIPTION("Amlogic AXG SPDIF Input driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");
Add support for the spdif input decoder of the axg SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/meson/Kconfig | 9 +- sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-spdifin.c | 521 ++++++++++++++++++++++++++++++++++ 3 files changed, 531 insertions(+), 1 deletion(-) create mode 100644 sound/soc/meson/axg-spdifin.c