| Message ID | 20190314140135.19184-2-jbrunet@baylibre.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | net: phy: add Amlogic g12a support | expand |
On Thu, Mar 14, 2019 at 03:01:33PM +0100, Jerome Brunet wrote: > Add documentation for the device tree bindings of the MDIO mux of Amlogic > g12a SoC family > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > .../bindings/net/mdio-mux-meson-g12a.txt | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt > > diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt > new file mode 100644 > index 000000000000..e738bba6a9de > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt > @@ -0,0 +1,48 @@ > +Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family. > + > +This is a special case of a MDIO bus multiplexer. It allows to choose between > +the internal mdio bus leading to the embedded 10/100 PHY or the external > +MDIO bus. > + > +Required properties in addition to the generic multiplexer properties: > +- compatible : amlogic,g12a-mdio-mux > +- reg: physical address and length of the multiplexer/glue registers > +- clocks: list of clock phandle, one for each entry clock-names. > +- clock-names: should contain the following: > + * "pclk" : peripheral clock. > + * "clkin0" : platform crytal > + * "clkin1" : SoC 50MHz MPLL > + > +Example : > + > +mdio-mux: mdio-multiplexer@4c000 { > + compatible = "amlogic,g12a-mdio-mux"; > + reg = <0x0 0x4c000 0x0 0xa4>; > + clocks = <&clkc CLKID_ETH_PHY>, > + <&xtal>, > + <&clkc CLKID_MPLL_5OM>; > + clock-names = "pclk", "clkin0", "clkin1"; > + mdio-parent-bus = <&mdio0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ext_mdio: mdio@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + int_mdio: mdio@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + internal_ephy: ethernet_phy@8 { ethernet-phy@8 Otherwise, Reviewed-by: Rob Herring <robh@kernel.org> > + compatible = "ethernet-phy-id0180.3301", > + "ethernet-phy-ieee802.3-c22"; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <8>; > + max-speed = <100>; > + }; > + }; > +}; > -- > 2.20.1 >
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt new file mode 100644 index 000000000000..e738bba6a9de --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt @@ -0,0 +1,48 @@ +Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family. + +This is a special case of a MDIO bus multiplexer. It allows to choose between +the internal mdio bus leading to the embedded 10/100 PHY or the external +MDIO bus. + +Required properties in addition to the generic multiplexer properties: +- compatible : amlogic,g12a-mdio-mux +- reg: physical address and length of the multiplexer/glue registers +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "clkin0" : platform crytal + * "clkin1" : SoC 50MHz MPLL + +Example : + +mdio-mux: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_5OM>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; +};
Add documentation for the device tree bindings of the MDIO mux of Amlogic g12a SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- .../bindings/net/mdio-mux-meson-g12a.txt | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt