diff mbox series

[1/2] ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator

Message ID 20190520200839.22715-2-martin.blumenstingl@googlemail.com (mailing list archive)
State Mainlined
Commit 0b67e66a5fa70da8c36c1b5aa1873fa8bc254caa
Headers show
Series ARM: dts: add the GPU voltage supply on MXIII-Plus | expand

Commit Message

Martin Blumenstingl May 20, 2019, 8:08 p.m. UTC 
The DCDC2 regulator output is actually called "VDD_EE" in various
Meson8b board schematics. This matches with what Amlogic names it in the
most part of their vendor kernel (there are a few places where it's
actually called VDDAO, schematics of EC-100 suggest that the regulator
output is used for both signals).
While here, also give the regulator an alias as it supplies the Mali GPU
so a phandle to it will be required later on.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index 29d830ae4bf4..c7d9cf035e22 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -114,8 +114,9 @@ 
 				regulator-always-on;
 			};
 
-			DCDC2 {
-				regulator-name = "VDDAO";
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;