diff mbox series

[2/3] ARM: dts: meson8b: odroidc1: use the same RGMII TX delay as u-boot

Message ID 20191225005655.1502037-3-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series Meson8b/8m2: Ethernet RGMII TX delay fixes | expand

Commit Message

Martin Blumenstingl Dec. 25, 2019, 12:56 a.m. UTC 
Due to a bug in the MPLL2 clock setup (which is used as input for the
RGMII TX clock) a TX delay of 2ns did not work previously. With a TX
delay of 4ns Ethernet worked enough to get an IP via DHCP but there was
still high packet loss when transmitting data.

Update the TX delay to 2ns - which is the same value that u-boot and the
vendor kernel use - to fix the packet loss when transmitting data.

Fixes: 9c15795a4f96cb ("ARM: dts: meson8b-odroidc1: ethernet support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..e2ba2d66d8d9 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -204,7 +204,7 @@  &ethmac {
 
 	phy-mode = "rgmii";
 	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
+	amlogic,tx-delay-ns = <2>;
 
 	nvmem-cells = <&ethernet_mac_address>;
 	nvmem-cell-names = "mac-address";