Message ID | 20200504195105.2909711-1-martin.blumenstingl@googlemail.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | 9530dcf1082da23438ee557291c07d475128f63a |
Headers | show |
Series | ARM: dts: meson: add the gadget mode properties to the USB0 controller | expand |
On Mon, 4 May 2020 21:51:05 +0200, Martin Blumenstingl wrote: > Testing with a USB RNDIS connection and iperf3 gives the following > results: > - From the host computer to the device at ~250Mbit/s > - From the device to the host computer at ~76Mbit/s Applied, thanks! [1/1] ARM: dts: meson: add the gadget mode properties to the USB0 controller commit: 9530dcf1082da23438ee557291c07d475128f63a Best regards,
Hello: This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next). On Mon, 4 May 2020 21:51:05 +0200 you wrote: > Testing with a USB RNDIS connection and iperf3 gives the following > results: > - From the host computer to the device at ~250Mbit/s > - From the device to the host computer at ~76Mbit/s > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > [...] Here is a summary with links: - ARM: dts: meson: add the gadget mode properties to the USB0 controller https://git.kernel.org/khilman/linux-amlogic/c/9530dcf1082da23438ee557291c07d475128f63a You are awesome, thank you!
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 5d198309058a..ae89deaa8c9c 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -229,6 +229,9 @@ usb0: usb@c9040000 { interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb0_phy>; phy-names = "usb2-phy"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <500>; + g-tx-fifo-size = <256 192 128 128 128>; dr_mode = "host"; status = "disabled"; };
Testing with a USB RNDIS connection and iperf3 gives the following results: - From the host computer to the device at ~250Mbit/s - From the device to the host computer at ~76Mbit/s Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm/boot/dts/meson.dtsi | 3 +++ 1 file changed, 3 insertions(+)