| Message ID | 20200803141850.172704-1-jbrunet@baylibre.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 1f9d87d08e4a2299e86f8a1600aedf87ecd3b636 |
| Headers | show |
| Series | arm64: dts: meson: vim3: correct led polarity | expand |
Hello: This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next). On Mon, 3 Aug 2020 16:18:50 +0200 you wrote: > The LEDs on the vim3 are active when the gpio is high, not low. > > Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree") > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Here is a summary with links: - arm64: dts: meson: vim3: correct led polarity https://git.kernel.org/khilman/linux-amlogic/c/1f9d87d08e4a2299e86f8a1600aedf87ecd3b636 You are awesome, thank you!
On Mon, 3 Aug 2020 16:18:50 +0200, Jerome Brunet wrote:
> The LEDs on the vim3 are active when the gpio is high, not low.
Applied, thanks!
[1/1] arm64: dts: meson: vim3: correct led polarity
(no commit info)
Best regards,
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 4510a63b0006..9e2995dc144b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -70,13 +70,13 @@ leds { led-white { label = "vim3:white:sys"; - gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-red { label = "vim3:red"; - gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; }; };
The LEDs on the vim3 are active when the gpio is high, not low. Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)