| Message ID | 20210201210508.1528-2-christianshewitt@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H | expand |
On 01/02/2021 22:05, Christian Hewitt wrote: > Minix NEO U9-H is based on the Amlogic Q200 reference board with an > S912-H chip and the following specs: > > - 2GB DDR3 RAM > - 16GB eMMC > - 10/100/1000 Base-T Ethernet > - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) > - RTC chip > - HDMI 2.1 video > - S/PDIF optical output > - ES8323 audio codec > - Analogue headphone output > - 3x USB 2.0 ports (1x OTG) > - IR receiver > - 1x Power LED (white) > - 1x Power button (rear) > - 1x Update/Reset button (underside) > - 1x micro SD card slot > > Tested-by: Wes Bradley <komplex@live.ie> > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../dts/amlogic/meson-gxm-minix-neo-u9h.dts | 120 ++++++++++++++++++ > 2 files changed, 121 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index dce41cd3f347..46e67de3d6d2 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts > new file mode 100644 > index 000000000000..a414cd39c2b1 > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts > @@ -0,0 +1,120 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "meson-gxm.dtsi" > +#include "meson-gx-p23x-q20x.dtsi" > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > + > +/ { > + compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm"; > + model = "Minix Neo U9-H"; > + > + leds { > + compatible = "gpio-leds"; > + > + white { > + color = <LED_COLOR_ID_WHITE>; > + function = LED_FUNCTION_POWER; > + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + panic-indicator; > + }; > + }; > + > + adc-keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 0>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1710000>; > + > + button-function { > + label = "update"; > + linux,code = <KEY_VENDOR>; > + press-threshold-microvolt = <10000>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <100>; > + > + button@0 { > + label = "power"; > + linux,code = <KEY_POWER>; > + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; > + > +ðmac { > + pinctrl-0 = <ð_pins>; > + pinctrl-names = "default"; > + phy-handle = <&external_phy>; > + amlogic,tx-delay-ns = <2>; > + phy-mode = "rgmii"; > +}; > + > +&external_mdio { > + external_phy: ethernet-phy@0 { > + /* Realtek RTL8211F (0x001cc916) */ > + reg = <0>; > + max-speed = <1000>; > + > + reset-assert-us = <10000>; > + reset-deassert-us = <80000>; > + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; > + > + interrupt-parent = <&gpio_intc>; > + /* MAC_INTR on GPIOZ_15 */ > + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&ir { > + linux,rc-map-name = "rc-minix-neo"; > +}; > + > +&i2c_B { > + status = "okay"; > + pinctrl-0 = <&i2c_b_pins>; > + pinctrl-names = "default"; > + > + rtc: rtc@51 { > + status = "okay"; > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "xin32k"; > + wakeup-source; > + }; > +}; > + > +&sd_emmc_a { > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; > + max-speed = <2000000>; > + clocks = <&wifi32k>; > + clock-names = "lpo"; > + }; > +}; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index dce41cd3f347..46e67de3d6d2 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts new file mode 100644 index 000000000000..a414cd39c2b1 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm"; + model = "Minix Neo U9-H"; + + leds { + compatible = "gpio-leds"; + + white { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-minix-neo"; +}; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + status = "okay"; + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + wakeup-source; + }; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +};