@@ -55,6 +55,8 @@
#define VCLK2_DIV_MASK 0xff
#define VCLK2_DIV_EN BIT(16)
#define VCLK2_DIV_RESET BIT(17)
+#define CTS_ENCL_SEL_MASK (0xf << 12)
+#define CTS_ENCL_SEL_SHIFT 12
#define CTS_VDAC_SEL_MASK (0xf << 28)
#define CTS_VDAC_SEL_SHIFT 28
#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
@@ -83,6 +85,7 @@
#define VCLK_DIV12_EN BIT(4)
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define CTS_ENCI_EN BIT(0)
+#define CTS_ENCL_EN BIT(3)
#define CTS_ENCP_EN BIT(2)
#define CTS_VDAC_EN BIT(4)
#define HDMI_TX_PIXEL_EN BIT(5)
@@ -1024,6 +1027,47 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
regmap_update_bits(priv->hhi, HHI_VID_CLK_CNTL, VCLK_EN, VCLK_EN);
}
+static void meson_dsi_clock_config(struct meson_drm *priv, unsigned int freq)
+{
+ meson_hdmi_pll_generic_set(priv, freq * 10);
+
+ /* Setup vid_pll divider value /5 */
+ meson_vid_pll_set(priv, VID_PLL_DIV_5);
+
+ /* Disable VCLK2 */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, 0);
+
+ /* Setup the VCLK2 divider value /2 */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV, VCLK2_DIV_MASK, 2 - 1);
+
+ /* select vid_pll for vclk2 */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
+ VCLK2_SEL_MASK, (0 << VCLK2_SEL_SHIFT));
+
+ /* enable vclk2 gate */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, VCLK2_EN);
+
+ /* select vclk2_div1 for encl */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
+ CTS_ENCL_SEL_MASK, (8 << CTS_ENCL_SEL_SHIFT));
+
+ /* release vclk2_div_reset and enable vclk2_div */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV, VCLK2_DIV_EN | VCLK2_DIV_RESET,
+ VCLK2_DIV_EN);
+
+ /* enable vclk2_div1 gate */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_DIV1_EN, VCLK2_DIV1_EN);
+
+ /* reset vclk2 */
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_SOFT_RESET, VCLK2_SOFT_RESET);
+ regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_SOFT_RESET, 0);
+
+ /* enable encl_clk */
+ regmap_update_bits(priv->hhi, HHI_VID_CLK_CNTL2, CTS_ENCL_EN, CTS_ENCL_EN);
+
+ usleep_range(10000, 11000);
+}
+
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
unsigned int phy_freq, unsigned int vclk_freq,
unsigned int venc_freq, unsigned int dac_freq,
@@ -1050,6 +1094,9 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
meson_vclk_set(priv, phy_freq, 0, 0, 0,
VID_PLL_DIV_5, 2, 1, 1, false, false);
return;
+ } else if (target == MESON_VCLK_TARGET_DSI) {
+ meson_dsi_clock_config(priv, phy_freq);
+ return;
}
hdmi_tx_div = vclk_freq / dac_freq;
@@ -17,6 +17,7 @@ enum {
MESON_VCLK_TARGET_CVBS = 0,
MESON_VCLK_TARGET_HDMI = 1,
MESON_VCLK_TARGET_DMT = 2,
+ MESON_VCLK_TARGET_DSI = 3,
};
/* 27MHz is the CVBS Pixel Clock */
The DSI path used the ENCL pixel encoder, thus this adds a clock config using the HDMI PLL in order to feed the ENCL encoder via the VCLK2 path and the CTS_ENCL clock output. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/gpu/drm/meson/meson_vclk.c | 47 ++++++++++++++++++++++++++++++ drivers/gpu/drm/meson/meson_vclk.h | 1 + 2 files changed, 48 insertions(+)