@@ -592,7 +592,7 @@ static void spi_dev_set_name(struct spi_device *spi)
}
dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev),
- spi->chip_select);
+ spi->chip_select[0]);
}
static int spi_dev_check(struct device *dev, void *data)
@@ -601,7 +601,8 @@ static int spi_dev_check(struct device *dev, void *data)
struct spi_device *new_spi = data;
if (spi->controller == new_spi->controller &&
- spi->chip_select == new_spi->chip_select)
+ spi->chip_select[0] == new_spi->chip_select[0] &&
+ spi->chip_select[1] == new_spi->chip_select[1])
return -EBUSY;
return 0;
}
@@ -616,7 +617,7 @@ static int __spi_add_device(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct device *dev = ctlr->dev.parent;
- int status;
+ int status, idx;
/*
* We need to make sure there's no other device with this
@@ -626,7 +627,7 @@ static int __spi_add_device(struct spi_device *spi)
status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
if (status) {
dev_err(dev, "chipselect %d already in use\n",
- spi->chip_select);
+ spi->chip_select[0]);
return status;
}
@@ -636,8 +637,10 @@ static int __spi_add_device(struct spi_device *spi)
return -ENODEV;
}
- if (ctlr->cs_gpiods)
- spi->cs_gpiod = ctlr->cs_gpiods[spi->chip_select];
+ if (ctlr->cs_gpiods) {
+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
+ spi->cs_gpiod[idx] = ctlr->cs_gpiods[spi->chip_select[idx]];
+ }
/*
* Drivers may modify this initial i/o setup, but will
@@ -677,13 +680,15 @@ int spi_add_device(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct device *dev = ctlr->dev.parent;
- int status;
+ int status, idx;
- /* Chipselects are numbered 0..max; validate. */
- if (spi->chip_select >= ctlr->num_chipselect) {
- dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
- ctlr->num_chipselect);
- return -EINVAL;
+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
+ /* Chipselects are numbered 0..max; validate. */
+ if (spi->chip_select[idx] >= ctlr->num_chipselect) {
+ dev_err(dev, "cs%d >= max %d\n", spi->chip_select[idx],
+ ctlr->num_chipselect);
+ return -EINVAL;
+ }
}
/* Set the bus ID string */
@@ -700,12 +705,15 @@ static int spi_add_device_locked(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct device *dev = ctlr->dev.parent;
+ int idx;
- /* Chipselects are numbered 0..max; validate. */
- if (spi->chip_select >= ctlr->num_chipselect) {
- dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
- ctlr->num_chipselect);
- return -EINVAL;
+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
+ /* Chipselects are numbered 0..max; validate. */
+ if (spi->chip_select[idx] >= ctlr->num_chipselect) {
+ dev_err(dev, "cs%d >= max %d\n", spi->chip_select[idx],
+ ctlr->num_chipselect);
+ return -EINVAL;
+ }
}
/* Set the bus ID string */
@@ -749,7 +757,7 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
- proxy->chip_select = chip->chip_select;
+ proxy->chip_select[0] = chip->chip_select;
proxy->max_speed_hz = chip->max_speed_hz;
proxy->mode = chip->mode;
proxy->irq = chip->irq;
@@ -953,29 +961,32 @@ static void spi_res_release(struct spi_controller *ctlr, struct spi_message *mes
static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
{
bool activate = enable;
+ u32 cs_num = __ffs(spi->cs_index_mask);
+ int idx;
/*
* Avoid calling into the driver (or doing delays) if the chip select
* isn't actually changing from the last time this was called.
*/
- if (!force && ((enable && spi->controller->last_cs == spi->chip_select) ||
- (!enable && spi->controller->last_cs != spi->chip_select)) &&
+ if (!force && ((enable &&
+ spi->controller->last_cs == spi->chip_select[cs_num]) ||
+ (!enable &&
+ spi->controller->last_cs != spi->chip_select[cs_num])) &&
(spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH)))
return;
trace_spi_set_cs(spi, activate);
- spi->controller->last_cs = enable ? spi->chip_select : -1;
+ spi->controller->last_cs = enable ? spi->chip_select[cs_num] : -1;
spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
- if ((spi->cs_gpiod || !spi->controller->set_cs_timing) && !activate) {
+ if ((spi->cs_gpiod[cs_num] || !spi->controller->set_cs_timing) && !activate)
spi_delay_exec(&spi->cs_hold, NULL);
- }
if (spi->mode & SPI_CS_HIGH)
enable = !enable;
- if (spi->cs_gpiod) {
+ if (spi->cs_gpiod[cs_num]) {
if (!(spi->mode & SPI_NO_CS)) {
/*
* Historically ACPI has no means of the GPIO polarity and
@@ -988,10 +999,10 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
* into account.
*/
if (has_acpi_companion(&spi->dev))
- gpiod_set_value_cansleep(spi->cs_gpiod, !enable);
+ gpiod_set_value_cansleep(spi->cs_gpiod[cs_num], !enable);
else
/* Polarity handled by GPIO library */
- gpiod_set_value_cansleep(spi->cs_gpiod, activate);
+ gpiod_set_value_cansleep(spi->cs_gpiod[cs_num], activate);
}
/* Some SPI masters need both GPIO CS & slave_select */
if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
@@ -1001,7 +1012,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
spi->controller->set_cs(spi, !enable);
}
- if (spi->cs_gpiod || !spi->controller->set_cs_timing) {
+ if (spi->cs_gpiod[cs_num] || !spi->controller->set_cs_timing) {
if (activate)
spi_delay_exec(&spi->cs_setup, NULL);
else
@@ -2139,8 +2150,8 @@ void spi_flush_queue(struct spi_controller *ctlr)
static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
struct device_node *nc)
{
- u32 value;
- int rc;
+ u32 value, cs[SPI_CS_CNT_MAX] = {0};
+ int rc, idx;
/* Mode (clock phase/polarity/etc.) */
if (of_property_read_bool(nc, "spi-cpha"))
@@ -2213,13 +2224,17 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
}
/* Device address */
- rc = of_property_read_u32(nc, "reg", &value);
- if (rc) {
+ rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1,
+ SPI_CS_CNT_MAX);
+ if (rc < 0 || rc > ctlr->num_chipselect) {
dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
nc, rc);
return rc;
}
- spi->chip_select = value;
+ for (idx = 0; idx < rc; idx++)
+ spi->chip_select[idx] = cs[idx];
+ /* By default set the spi->cs_index_mask as 1 */
+ spi->cs_index_mask = 0x01;
/* Device speed */
if (!of_property_read_u32(nc, "spi-max-frequency", &value))
@@ -2333,7 +2348,7 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
strlcpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias));
/* Use provided chip-select for ancillary device */
- ancillary->chip_select = chip_select;
+ ancillary->chip_select[0] = chip_select;
/* Take over SPI mode/speed from SPI main device */
ancillary->max_speed_hz = spi->max_speed_hz;
@@ -2580,7 +2595,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
spi->mode |= lookup.mode;
spi->irq = lookup.irq;
spi->bits_per_word = lookup.bits_per_word;
- spi->chip_select = lookup.chip_select;
+ spi->chip_select[0] = lookup.chip_select;
return spi;
}
@@ -3687,6 +3702,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
struct spi_controller *ctlr = spi->controller;
struct spi_transfer *xfer;
int w_size;
+ u32 cs_num = __ffs(spi->cs_index_mask);
if (list_empty(&message->transfers))
return -EINVAL;
@@ -3699,7 +3715,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
* cs_change is set for each transfer.
*/
if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) ||
- spi->cs_gpiod)) {
+ spi->cs_gpiod[cs_num])) {
size_t maxsize;
int ret;
@@ -19,6 +19,9 @@
#include <linux/acpi.h>
#include <linux/u64_stats_sync.h>
+/* Max no. of CS supported per spi device */
+#define SPI_CS_CNT_MAX 2
+
struct dma_chan;
struct software_node;
struct ptp_system_timestamp;
@@ -163,6 +166,7 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
* deasserted. If @cs_change_delay is used from @spi_transfer, then the
* two delays will be added up.
* @pcpu_statistics: statistics for the spi_device
+ * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array
*
* A @spi_device is used to interchange data between an SPI slave
* (usually a discrete chip) and CPU memory.
@@ -178,7 +182,7 @@ struct spi_device {
struct spi_controller *controller;
struct spi_controller *master; /* Compatibility layer */
u32 max_speed_hz;
- u8 chip_select;
+ u8 chip_select[SPI_CS_CNT_MAX];
u8 bits_per_word;
bool rt;
#define SPI_NO_TX BIT(31) /* No transmit wire */
@@ -199,7 +203,7 @@ struct spi_device {
void *controller_data;
char modalias[SPI_NAME_SIZE];
const char *driver_override;
- struct gpio_desc *cs_gpiod; /* Chip select gpio desc */
+ struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /* Chip select gpio desc */
struct spi_delay word_delay; /* Inter-word delay */
/* CS delays */
struct spi_delay cs_setup;
@@ -209,6 +213,14 @@ struct spi_device {
/* The statistics */
struct spi_statistics __percpu *pcpu_statistics;
+ /*
+ * Bit mask of the chipselect(s) that the driver need to use from
+ * the chipselect array.When the controller is capable to handle
+ * multiple chip selects & memories are connected in parallel
+ * then more than one bit need to be set in cs_index_mask.
+ */
+ u32 cs_index_mask : 2;
+
/*
* likely need more hooks for more protocol options affecting how
* the controller talks to each chip, like:
For supporting multiple CS the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. Multi CS support using GPIO is not tested due to unavailability of necessary hardware setup. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> --- drivers/spi/spi.c | 86 ++++++++++++++++++++++++----------------- include/linux/spi/spi.h | 16 +++++++- 2 files changed, 65 insertions(+), 37 deletions(-)