@@ -285,7 +285,7 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
return ret;
}
- if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd))
dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
ret = amlogic_thermal_initialize(pdata);
@@ -343,7 +343,7 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
}
tmu->sensors[i].hw_id = i;
- if (devm_thermal_add_hwmon_sysfs(tmu->sensors[i].tzd))
+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd))
dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
}
@@ -116,7 +116,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
return ret;
}
- if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd))
dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
}
@@ -222,7 +222,7 @@ static int k3_bandgap_probe(struct platform_device *pdev)
goto err_alloc;
}
- if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
+ if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd))
dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
}
@@ -1210,7 +1210,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_peri_therm;
}
- ret = devm_thermal_add_hwmon_sysfs(tzdev);
+ ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
if (ret)
dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
@@ -689,7 +689,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
return PTR_ERR(tzd);
}
adc_tm->channels[i].tzd = tzd;
- if (devm_thermal_add_hwmon_sysfs(tzd))
+ if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
dev_warn(adc_tm->dev,
"Failed to add hwmon sysfs attributes\n");
}
@@ -459,7 +459,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return ret;
}
- if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
dev_warn(&pdev->dev,
"Failed to add hwmon sysfs attributes\n");
@@ -1189,7 +1189,7 @@ static int tsens_register(struct tsens_priv *priv)
if (priv->ops->enable)
priv->ops->enable(priv, i);
- if (devm_thermal_add_hwmon_sysfs(tzd))
+ if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
dev_warn(priv->dev,
"Failed to add hwmon sysfs attributes\n");
}
@@ -157,7 +157,7 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
return ret;
}
- if (devm_thermal_add_hwmon_sysfs(tzd))
+ if (devm_thermal_add_hwmon_sysfs(dev, tzd))
dev_warn(dev,
"Failed to add hwmon sysfs attributes\n");
@@ -475,7 +475,7 @@ static int sun8i_ths_register(struct ths_device *tmdev)
if (IS_ERR(tmdev->sensor[i].tzd))
return PTR_ERR(tmdev->sensor[i].tzd);
- if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
+ if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd))
dev_warn(tmdev->dev,
"Failed to add hwmon sysfs attributes\n");
}
@@ -528,7 +528,7 @@ static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
return 0;
}
- if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
+ if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd))
dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
return 0;
@@ -263,7 +263,7 @@ static void devm_thermal_hwmon_release(struct device *dev, void *res)
thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
}
-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
{
struct thermal_zone_device **ptr;
int ret;
@@ -280,7 +280,7 @@ int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
}
*ptr = tz;
- devres_add(&tz->device, ptr);
+ devres_add(dev, ptr);
return ret;
}
@@ -17,7 +17,7 @@
#ifdef CONFIG_THERMAL_HWMON
int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz);
void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
#else
static inline int
@@ -27,7 +27,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
}
static inline int
-devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
{
return 0;
}
@@ -182,7 +182,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
ti_bandgap_set_sensor_data(bgp, id, data);
ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
- if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
+ if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
return 0;
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal zone structure pointer as parameter. Actually, it uses the tz->device to add it in the devres list. It is preferable to use the device registering the thermal zone instead of the thermal zone device itself. That prevents the driver accessing the thermal zone structure internals and it is from my POV more correct regarding how devm_ is used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/amlogic_thermal.c | 2 +- drivers/thermal/imx8mm_thermal.c | 2 +- drivers/thermal/imx_sc_thermal.c | 2 +- drivers/thermal/k3_bandgap.c | 2 +- drivers/thermal/mediatek/auxadc_thermal.c | 2 +- drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 2 +- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 2 +- drivers/thermal/qcom/tsens.c | 2 +- drivers/thermal/qoriq_thermal.c | 2 +- drivers/thermal/sun8i_thermal.c | 2 +- drivers/thermal/tegra/tegra30-tsensor.c | 2 +- drivers/thermal/thermal_hwmon.c | 4 ++-- drivers/thermal/thermal_hwmon.h | 4 ++-- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- 14 files changed, 16 insertions(+), 16 deletions(-)