@@ -1,22 +1,23 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-N2L
-=====================
+U-Boot for ODROID-N2L (S922X)
+=============================
-ODROID-N2L is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-N2L is a Single Board Computer manufactured by Hardkernel with the following
+specifications:
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- 4GB DDR4 SDRAM
- HDMI 2.1 4K/60Hz display
- 40-pin GPIO header
- - 1 x USB 3.0 Host, 1 x USB USB 2.0 Host
+ - 1x USB 3.0 Host
+ - 1x USB 2.0 Host
- eMMC, microSD
- MIPI DSI Port
-Schematics are available on the manufacturer website.
+Schematics are available on the manufacturer website: https://wiki.odroid.com
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -25,7 +26,19 @@ U-Boot compilation
$ make odroid-n2l_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-n2l`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-n2l /path/to/u-boot/u-boot.bin my-output-dir
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
Improve documentation. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- doc/board/amlogic/odroid-n2l.rst | 33 ++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-)