@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Beelink GT-King
-==========================
+U-Boot for Beelink GT-King (S922X)
+==================================
-The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
-board with an S922X-H chip.
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an
+S922X-H chip and the following specifications:
- 4GB LPDDR4 RAM
- 64GB eMMC storage
@@ -18,10 +18,10 @@ board with an S922X-H chip.
- IR receiver
- 1x micro SD card slot
-Beelink do not provide public schematics, but have been willing
-to share them with known distro developers on request.
+Beelink do not provide public schematics, but have been willing to share them with known
+distro developers to assist with development.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -30,21 +30,21 @@ U-Boot compilation
$ make beelink-gtking_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Amlogic does not provide sources for the firmware and for tools needed
-to create the bootloader image. Beelink have provided the Amlogic "SDK"
-in their forums, but the u-boot sources included result in 2GB RAM being
-detected. The following FIPs were generated with newer private sources
-and give correct (4GB) RAM detection:
-
-https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
-NB: Beelink use a common board config for GT-King, GT-King Pro and the
-GS-King-X model, hence the "beelink-s922x" name.
+U-Boot Manual Signing
+---------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `beelink-s922x`
+Beelink released an Amlogic "SDK" dump in their forums, but the U-Boot sources included
+result in 2GB RAM detected. The following FIPs were generated with newer sources and
+detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
.. code-block:: bash
@@ -61,57 +61,57 @@ Go back to the mainline U-Boot source tree then:
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ fip/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
Improve documentation. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- doc/board/amlogic/beelink-gtking.rst | 120 +++++++++++++-------------- 1 file changed, 60 insertions(+), 60 deletions(-)