Message ID | 20230601061850.3907800-5-AVKrasnov@sberdevices.ru (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | refactoring, fixes and updates for Meson NAND | expand |
Hi Arseniy, AVKrasnov@sberdevices.ru wrote on Thu, 1 Jun 2023 09:18:47 +0300: > This replaces constants and same patterns for OOB handling with special > macroses. > > Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> > --- > drivers/mtd/nand/raw/meson_nand.c | 33 ++++++++++++++++++------------- > 1 file changed, 19 insertions(+), 14 deletions(-) > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c > index e42c28be02f3..23a73268421b 100644 > --- a/drivers/mtd/nand/raw/meson_nand.c > +++ b/drivers/mtd/nand/raw/meson_nand.c > @@ -108,6 +108,9 @@ > > #define PER_INFO_BYTE 8 > > +#define NFC_USER_BYTES 2 > +#define NFC_OOB_PER_ECC(nand) ((nand)->ecc.bytes + NFC_USER_BYTES) OOB per ECC for me does not make sense. OOB is the whole area after the data. What about NFC_OOB_SZ_PER_ECC_STEP ? > + > struct meson_nfc_nand_chip { > struct list_head node; > struct nand_chip nand; > @@ -339,7 +342,7 @@ static u8 *meson_nfc_oob_ptr(struct nand_chip *nand, int i) > struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand); > int len; > > - len = nand->ecc.size * (i + 1) + (nand->ecc.bytes + 2) * i; > + len = nand->ecc.size * (i + 1) + NFC_OOB_PER_ECC(nand) * i; > > return meson_chip->data_buf + len; > } > @@ -350,7 +353,7 @@ static u8 *meson_nfc_data_ptr(struct nand_chip *nand, int i) > int len, temp; > > temp = nand->ecc.size + nand->ecc.bytes; > - len = (temp + 2) * i; > + len = (temp + NFC_USER_BYTES) * i; > > return meson_chip->data_buf + len; > } > @@ -364,7 +367,7 @@ static void meson_nfc_get_data_oob(struct nand_chip *nand, > u8 *dsrc, *osrc; > u8 *oobtail; > > - oob_len = nand->ecc.bytes + 2; > + oob_len = NFC_OOB_PER_ECC(nand); > for (i = 0; i < nand->ecc.steps; i++) { > if (buf) { > dsrc = meson_nfc_data_ptr(nand, i); > @@ -393,7 +396,7 @@ static void meson_nfc_set_data_oob(struct nand_chip *nand, > u8 *dsrc, *osrc; > u8 *oobtail; > > - oob_len = nand->ecc.bytes + 2; > + oob_len = NFC_OOB_PER_ECC(nand); > for (i = 0; i < nand->ecc.steps; i++) { > if (buf) { > dsrc = meson_nfc_data_ptr(nand, i); > @@ -452,7 +455,7 @@ static void meson_nfc_set_user_byte(struct nand_chip *nand, u8 *oob_buf) > __le64 *info; > int i, count; > > - for (i = 0, count = 0; i < nand->ecc.steps; i++, count += (nand->ecc.bytes + 2)) { > + for (i = 0, count = 0; i < nand->ecc.steps; i++, count += NFC_OOB_PER_ECC(nand)) { > info = &meson_chip->info_buf[i]; > *info |= oob_buf[count]; > *info |= oob_buf[count + 1] << 8; > @@ -465,7 +468,7 @@ static void meson_nfc_get_user_byte(struct nand_chip *nand, u8 *oob_buf) > __le64 *info; > int i, count; > > - for (i = 0, count = 0; i < nand->ecc.steps; i++, count += (nand->ecc.bytes + 2)) { > + for (i = 0, count = 0; i < nand->ecc.steps; i++, count += NFC_OOB_PER_ECC(nand)) { > info = &meson_chip->info_buf[i]; > oob_buf[count] = *info; > oob_buf[count + 1] = *info >> 8; > @@ -661,7 +664,7 @@ static u32 meson_nfc_oob_free_bytes(struct nand_chip *nand) > { > struct mtd_info *mtd = nand_to_mtd(nand); > > - return mtd->oobsize - nand->ecc.steps * (nand->ecc.bytes + 2); > + return mtd->oobsize - nand->ecc.steps * NFC_OOB_PER_ECC(nand); > } > > static int meson_nfc_write_oob(struct nand_chip *nand, int page) > @@ -712,11 +715,11 @@ static int meson_nfc_read_oob(struct nand_chip *nand, int page) > /* Read ECC codes and user bytes. */ > for (i = 0; i < nand->ecc.steps; i++) { > u32 ecc_offs = nand->ecc.size * (i + 1) + > - (nand->ecc.bytes + 2) * i; > + NFC_OOB_PER_ECC(nand) * i; > > ret = nand_change_read_column_op(nand, ecc_offs, > - oob_buf + i * (nand->ecc.bytes + 2), > - (nand->ecc.bytes + 2), false); > + oob_buf + i * NFC_OOB_PER_ECC(nand), > + NFC_OOB_PER_ECC(nand), false); > if (ret) > return ret; > } > @@ -918,12 +921,14 @@ static int meson_nfc_read_page_hwecc(struct nand_chip *nand, u8 *buf, > > for (i = 0; i < nand->ecc.steps ; i++) { > u8 *data = buf + i * ecc->size; > - u8 *oob = nand->oob_poi + i * (ecc->bytes + 2); > + u8 *oob = nand->oob_poi + i * NFC_OOB_PER_ECC(nand); > > if (correct_bitmap & BIT_ULL(i)) > continue; > + > ret = nand_check_erased_ecc_chunk(data, ecc->size, > - oob, ecc->bytes + 2, > + oob, > + NFC_OOB_PER_ECC(nand), > NULL, 0, > ecc->strength); > if (ret < 0) { > @@ -1073,7 +1078,7 @@ static int meson_ooblayout_ecc(struct mtd_info *mtd, int section, > if (section >= nand->ecc.steps) > return -ERANGE; > > - oobregion->offset = 2 + (section * (2 + nand->ecc.bytes)); > + oobregion->offset = NFC_USER_BYTES + (section * NFC_OOB_PER_ECC(nand)); No, the first "2" here is for bad block markers, it is not related to your ECC engine layout I believe. > oobregion->length = nand->ecc.bytes; > > return 0; > @@ -1091,7 +1096,7 @@ static int meson_ooblayout_free(struct mtd_info *mtd, int section, > /* Split rest of OOB area (not covered by ECC engine) per each > * ECC section. This will be OOB data available to user. > */ > - oobregion->offset = (section + nand->ecc.steps) * (2 + nand->ecc.bytes); > + oobregion->offset = (section + nand->ecc.steps) * NFC_OOB_PER_ECC(nand); > oobregion->length = oob_bytes / nand->ecc.steps; > > return 0; Thanks, Miquèl
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index e42c28be02f3..23a73268421b 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -108,6 +108,9 @@ #define PER_INFO_BYTE 8 +#define NFC_USER_BYTES 2 +#define NFC_OOB_PER_ECC(nand) ((nand)->ecc.bytes + NFC_USER_BYTES) + struct meson_nfc_nand_chip { struct list_head node; struct nand_chip nand; @@ -339,7 +342,7 @@ static u8 *meson_nfc_oob_ptr(struct nand_chip *nand, int i) struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand); int len; - len = nand->ecc.size * (i + 1) + (nand->ecc.bytes + 2) * i; + len = nand->ecc.size * (i + 1) + NFC_OOB_PER_ECC(nand) * i; return meson_chip->data_buf + len; } @@ -350,7 +353,7 @@ static u8 *meson_nfc_data_ptr(struct nand_chip *nand, int i) int len, temp; temp = nand->ecc.size + nand->ecc.bytes; - len = (temp + 2) * i; + len = (temp + NFC_USER_BYTES) * i; return meson_chip->data_buf + len; } @@ -364,7 +367,7 @@ static void meson_nfc_get_data_oob(struct nand_chip *nand, u8 *dsrc, *osrc; u8 *oobtail; - oob_len = nand->ecc.bytes + 2; + oob_len = NFC_OOB_PER_ECC(nand); for (i = 0; i < nand->ecc.steps; i++) { if (buf) { dsrc = meson_nfc_data_ptr(nand, i); @@ -393,7 +396,7 @@ static void meson_nfc_set_data_oob(struct nand_chip *nand, u8 *dsrc, *osrc; u8 *oobtail; - oob_len = nand->ecc.bytes + 2; + oob_len = NFC_OOB_PER_ECC(nand); for (i = 0; i < nand->ecc.steps; i++) { if (buf) { dsrc = meson_nfc_data_ptr(nand, i); @@ -452,7 +455,7 @@ static void meson_nfc_set_user_byte(struct nand_chip *nand, u8 *oob_buf) __le64 *info; int i, count; - for (i = 0, count = 0; i < nand->ecc.steps; i++, count += (nand->ecc.bytes + 2)) { + for (i = 0, count = 0; i < nand->ecc.steps; i++, count += NFC_OOB_PER_ECC(nand)) { info = &meson_chip->info_buf[i]; *info |= oob_buf[count]; *info |= oob_buf[count + 1] << 8; @@ -465,7 +468,7 @@ static void meson_nfc_get_user_byte(struct nand_chip *nand, u8 *oob_buf) __le64 *info; int i, count; - for (i = 0, count = 0; i < nand->ecc.steps; i++, count += (nand->ecc.bytes + 2)) { + for (i = 0, count = 0; i < nand->ecc.steps; i++, count += NFC_OOB_PER_ECC(nand)) { info = &meson_chip->info_buf[i]; oob_buf[count] = *info; oob_buf[count + 1] = *info >> 8; @@ -661,7 +664,7 @@ static u32 meson_nfc_oob_free_bytes(struct nand_chip *nand) { struct mtd_info *mtd = nand_to_mtd(nand); - return mtd->oobsize - nand->ecc.steps * (nand->ecc.bytes + 2); + return mtd->oobsize - nand->ecc.steps * NFC_OOB_PER_ECC(nand); } static int meson_nfc_write_oob(struct nand_chip *nand, int page) @@ -712,11 +715,11 @@ static int meson_nfc_read_oob(struct nand_chip *nand, int page) /* Read ECC codes and user bytes. */ for (i = 0; i < nand->ecc.steps; i++) { u32 ecc_offs = nand->ecc.size * (i + 1) + - (nand->ecc.bytes + 2) * i; + NFC_OOB_PER_ECC(nand) * i; ret = nand_change_read_column_op(nand, ecc_offs, - oob_buf + i * (nand->ecc.bytes + 2), - (nand->ecc.bytes + 2), false); + oob_buf + i * NFC_OOB_PER_ECC(nand), + NFC_OOB_PER_ECC(nand), false); if (ret) return ret; } @@ -918,12 +921,14 @@ static int meson_nfc_read_page_hwecc(struct nand_chip *nand, u8 *buf, for (i = 0; i < nand->ecc.steps ; i++) { u8 *data = buf + i * ecc->size; - u8 *oob = nand->oob_poi + i * (ecc->bytes + 2); + u8 *oob = nand->oob_poi + i * NFC_OOB_PER_ECC(nand); if (correct_bitmap & BIT_ULL(i)) continue; + ret = nand_check_erased_ecc_chunk(data, ecc->size, - oob, ecc->bytes + 2, + oob, + NFC_OOB_PER_ECC(nand), NULL, 0, ecc->strength); if (ret < 0) { @@ -1073,7 +1078,7 @@ static int meson_ooblayout_ecc(struct mtd_info *mtd, int section, if (section >= nand->ecc.steps) return -ERANGE; - oobregion->offset = 2 + (section * (2 + nand->ecc.bytes)); + oobregion->offset = NFC_USER_BYTES + (section * NFC_OOB_PER_ECC(nand)); oobregion->length = nand->ecc.bytes; return 0; @@ -1091,7 +1096,7 @@ static int meson_ooblayout_free(struct mtd_info *mtd, int section, /* Split rest of OOB area (not covered by ECC engine) per each * ECC section. This will be OOB data available to user. */ - oobregion->offset = (section + nand->ecc.steps) * (2 + nand->ecc.bytes); + oobregion->offset = (section + nand->ecc.steps) * NFC_OOB_PER_ECC(nand); oobregion->length = oob_bytes / nand->ecc.steps; return 0;
This replaces constants and same patterns for OOB handling with special macroses. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> --- drivers/mtd/nand/raw/meson_nand.c | 33 ++++++++++++++++++------------- 1 file changed, 19 insertions(+), 14 deletions(-)