@@ -313,6 +313,7 @@ struct meson_sar_adc_param {
u8 temperature_trimming_bits;
unsigned int temperature_multiplier;
unsigned int temperature_divider;
+ u8 disable_ring_counter;
};
struct meson_sar_adc_data {
@@ -967,6 +968,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_DELTA_10_TS_REVE0, 0);
}
+ regval = FIELD_PREP(MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN,
+ priv->param->disable_ring_counter);
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN,
+ regval);
+
ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
if (ret)
return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
@@ -1196,6 +1203,7 @@ static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
.bandgap_reg = MESON_SAR_ADC_REG11,
.regmap_config = &meson_sar_adc_regmap_config_gxbb,
.resolution = 12,
+ .disable_ring_counter = 1,
};
static const struct meson_sar_adc_param meson_sar_adc_g12a_param = {
@@ -1204,6 +1212,7 @@ static const struct meson_sar_adc_param meson_sar_adc_g12a_param = {
.bandgap_reg = MESON_SAR_ADC_REG11,
.regmap_config = &meson_sar_adc_regmap_config_gxbb,
.resolution = 12,
+ .disable_ring_counter = 1,
};
static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
Disable internal continuous ring counter at init stage. Disable value depends on SoC family: gxl and later SoCs write 1, others write 0. This bit are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Signed-off-by: George Stark <gnstark@sberdevices.ru> --- drivers/iio/adc/meson_saradc.c | 9 +++++++++ 1 file changed, 9 insertions(+)