diff mbox series

[4/4] arm64: dts: Add watchdog node for Amlogic-T7 SoCs

Message ID 20230726112146.1127145-5-huqiang.qin@amlogic.com (mailing list archive)
State Superseded
Headers show
Series Add watchdog support for Amlogic-T7 SoCs | expand

Commit Message

Huqiang Qin July 26, 2023, 11:21 a.m. UTC
Add watchdog device.

Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Dmitry Rokosov July 28, 2023, 7:17 a.m. UTC | #1
On Wed, Jul 26, 2023 at 07:21:46PM +0800, Huqiang Qin wrote:
> Add watchdog device.
> 
> Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>

> ---
>  arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index 1423d4a79156..6e34d11214b7 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -143,6 +143,12 @@ apb4: bus@fe000000 {
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>  
> +			watchdog@2100 {
> +				compatible = "amlogic,t7-wdt";
> +				reg = <0x0 0x2100 0x0 0x10>;
> +				clocks = <&xtal>;
> +			};
> +
>  			uart_a: serial@78000 {
>  				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
>  				reg = <0x0 0x78000 0x0 0x18>;
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index 1423d4a79156..6e34d11214b7 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -143,6 +143,12 @@  apb4: bus@fe000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			uart_a: serial@78000 {
 				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
 				reg = <0x0 0x78000 0x0 0x18>;