| Message ID | 20230823133938.1359106-3-lizetao1@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [-next,v2,01/25] spi: ar934x: Use helper function devm_clk_get_enabled() | expand |
On Wed, 23 Aug 2023 21:39:15 +0800 Li Zetao <lizetao1@huawei.com> wrote: > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > and enabled clocks"), devm_clk_get() and clk_prepare() can now be replaced > by devm_clk_get_prepared() when driver prepares the clocks for the whole > lifetime of the device. Moreover, it is no longer necessary to unprepare > the clocks explicitly. > > Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > v1 -> v2: Drop the empty remove function a3700_spi_remove(). > > drivers/spi/spi-armada-3700.c | 23 +++-------------------- > 1 file changed, 3 insertions(+), 20 deletions(-) > > diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c > index 0103ac0158c0..3c9ed412932f 100644 > --- a/drivers/spi/spi-armada-3700.c > +++ b/drivers/spi/spi-armada-3700.c > @@ -865,18 +865,12 @@ static int a3700_spi_probe(struct platform_device *pdev) > > init_completion(&spi->done); > > - spi->clk = devm_clk_get(dev, NULL); > + spi->clk = devm_clk_get_prepared(dev, NULL); > if (IS_ERR(spi->clk)) { > dev_err(dev, "could not find clk: %ld\n", PTR_ERR(spi->clk)); > goto error; > } > > - ret = clk_prepare(spi->clk); > - if (ret) { > - dev_err(dev, "could not prepare clk: %d\n", ret); > - goto error; > - } > - > host->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ, > clk_get_rate(spi->clk)); > host->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk), > @@ -888,40 +882,29 @@ static int a3700_spi_probe(struct platform_device *pdev) > dev_name(dev), host); > if (ret) { > dev_err(dev, "could not request IRQ: %d\n", ret); > - goto error_clk; > + goto error; > } > > ret = devm_spi_register_controller(dev, host); > if (ret) { > dev_err(dev, "Failed to register host\n"); > - goto error_clk; > + goto error; > } > > return 0; > > -error_clk: > - clk_unprepare(spi->clk); > error: > spi_controller_put(host); > out: > return ret; > } > > -static void a3700_spi_remove(struct platform_device *pdev) > -{ > - struct spi_controller *host = platform_get_drvdata(pdev); > - struct a3700_spi *spi = spi_controller_get_devdata(host); > - > - clk_unprepare(spi->clk); > -} > - > static struct platform_driver a3700_spi_driver = { > .driver = { > .name = DRIVER_NAME, > .of_match_table = of_match_ptr(a3700_spi_dt_ids), > }, > .probe = a3700_spi_probe, > - .remove_new = a3700_spi_remove, > }; > > module_platform_driver(a3700_spi_driver);
diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 0103ac0158c0..3c9ed412932f 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -865,18 +865,12 @@ static int a3700_spi_probe(struct platform_device *pdev) init_completion(&spi->done); - spi->clk = devm_clk_get(dev, NULL); + spi->clk = devm_clk_get_prepared(dev, NULL); if (IS_ERR(spi->clk)) { dev_err(dev, "could not find clk: %ld\n", PTR_ERR(spi->clk)); goto error; } - ret = clk_prepare(spi->clk); - if (ret) { - dev_err(dev, "could not prepare clk: %d\n", ret); - goto error; - } - host->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ, clk_get_rate(spi->clk)); host->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk), @@ -888,40 +882,29 @@ static int a3700_spi_probe(struct platform_device *pdev) dev_name(dev), host); if (ret) { dev_err(dev, "could not request IRQ: %d\n", ret); - goto error_clk; + goto error; } ret = devm_spi_register_controller(dev, host); if (ret) { dev_err(dev, "Failed to register host\n"); - goto error_clk; + goto error; } return 0; -error_clk: - clk_unprepare(spi->clk); error: spi_controller_put(host); out: return ret; } -static void a3700_spi_remove(struct platform_device *pdev) -{ - struct spi_controller *host = platform_get_drvdata(pdev); - struct a3700_spi *spi = spi_controller_get_devdata(host); - - clk_unprepare(spi->clk); -} - static struct platform_driver a3700_spi_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(a3700_spi_dt_ids), }, .probe = a3700_spi_probe, - .remove_new = a3700_spi_remove, }; module_platform_driver(a3700_spi_driver);
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare() can now be replaced by devm_clk_get_prepared() when driver prepares the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare the clocks explicitly. Signed-off-by: Li Zetao <lizetao1@huawei.com> --- v1 -> v2: Drop the empty remove function a3700_spi_remove(). drivers/spi/spi-armada-3700.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-)