@@ -3,6 +3,8 @@
* Copyright (c) 2019 Amlogic, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
#include <dt-bindings/gpio/meson-a1-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -115,6 +117,21 @@ gpio_intc: interrupt-controller@440 {
<49 50 51 52 53 54 55 56>;
};
+ clkc_periphs: clock-controller@800 {
+ compatible = "amlogic,a1-peripherals-clkc";
+ reg = <0 0x800 0 0x104>;
+ #clock-cells = <1>;
+ clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div3",
+ "fclk_div5", "fclk_div7",
+ "hifi_pll", "xtal";
+ };
+
uart_AO: serial@1c00 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@@ -134,6 +151,15 @@ uart_AO_B: serial@2000 {
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ clkc_pll: pll-clock-controller@7c80 {
+ compatible = "amlogic,a1-pll-clkc";
+ reg = <0 0x7c80 0 0x18c>;
+ #clock-cells = <1>;
+ clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+ <&clkc_periphs CLKID_HIFIPLL_IN>;
+ clock-names = "fixpll_in", "hifipll_in";
+ };
};
gic: interrupt-controller@ff901000 {
This patch adds clkc and clkc_pll dts nodes to A1 SoC main dtsi. The first one is responsible for all SoC peripherals clocks excluding audio clocks. The second one is used by A1 SoC PLLs. Actually, there are two different APB heads, so we have two different drivers. Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> --- arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+)