@@ -994,6 +994,7 @@ static struct phy_driver adin_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
.name = "ADIN1200",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = adin_probe,
.config_init = adin_config_init,
.soft_reset = adin_soft_reset,
@@ -1012,11 +1013,13 @@ static struct phy_driver adin_driver[] = {
.write_mmd = adin_write_mmd,
.cable_test_start = adin_cable_test_start,
.cable_test_get_status = adin_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
.name = "ADIN1300",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = adin_probe,
.config_init = adin_config_init,
.soft_reset = adin_soft_reset,
@@ -1035,6 +1038,7 @@ static struct phy_driver adin_driver[] = {
.write_mmd = adin_write_mmd,
.cable_test_start = adin_cable_test_start,
.cable_test_get_status = adin_cable_test_get_status,
+ },
},
};
@@ -323,6 +323,7 @@ static struct phy_driver adin_driver[] = {
.phy_id = PHY_ID_ADIN1100,
.phy_id_mask = 0xffffffcf,
.name = "ADIN1100",
+ .ops = &(const struct phy_driver_ops){
.get_features = adin_get_features,
.soft_reset = adin_soft_reset,
.probe = adin_probe,
@@ -335,6 +336,7 @@ static struct phy_driver adin_driver[] = {
.resume = adin_resume,
.get_sqi = adin_get_sqi,
.get_sqi_max = adin_get_sqi_max,
+ },
},
};
@@ -94,18 +94,22 @@ static struct phy_driver am79c_drivers[] = {
.name = "AM79C874",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = am79c_config_init,
.config_intr = am79c_config_intr,
.handle_interrupt = am79c_handle_interrupt,
+ },
},
{
.phy_id = PHY_ID_AC101L,
.name = "AC101L",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = am79c_config_init,
.config_intr = am79c_config_intr,
.handle_interrupt = am79c_handle_interrupt,
+ },
},
};
@@ -772,40 +772,49 @@ static struct phy_driver aqr_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
.name = "Aquantia AQ1202",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
.name = "Aquantia AQ2104",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
.name = "Aquantia AQR105",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
.suspend = aqr107_suspend,
.resume = aqr107_resume,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
.name = "Aquantia AQR106",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
.name = "Aquantia AQR107",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr107_config_init,
@@ -821,10 +830,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
.name = "Aquantia AQCS109",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqcs109_config_init,
@@ -840,10 +851,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
.name = "Aquantia AQR111",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr111_config_init,
@@ -859,10 +872,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
.name = "Aquantia AQR111B0",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr111_config_init,
@@ -878,18 +893,22 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
.name = "Aquantia AQR405",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -904,10 +923,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
.name = "Aquantia AQR412",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -922,10 +943,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
.name = "Aquantia AQR113",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr113c_config_init,
@@ -941,10 +964,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
.name = "Aquantia AQR113C",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr113c_config_init,
@@ -960,6 +985,7 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
};
@@ -99,24 +99,30 @@ static struct phy_driver asix_driver[] = {
PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),
.name = "Asix Electronics AX88772A",
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.read_status = asix_ax88772a_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
.soft_reset = asix_soft_reset,
.link_change_notify = asix_ax88772a_link_change_notify,
+ },
}, {
PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C),
.name = "Asix Electronics AX88772C",
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.suspend = genphy_suspend,
.resume = genphy_resume,
.soft_reset = asix_soft_reset,
+ },
}, {
.phy_id = PHY_ID_ASIX_AX88796B,
.name = "Asix Electronics AX88796B",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = asix_soft_reset,
+ },
} };
module_phy_driver(asix_driver);
@@ -255,17 +255,20 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "Broadcom Cygnus PHY",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm_cygnus_config_init,
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.suspend = genphy_suspend,
.resume = bcm_cygnus_resume,
+ },
}, {
.phy_id = PHY_ID_BCM_OMEGA,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom Omega Combo GPHY",
/* PHY_GBIT_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm_omega_config_init,
.suspend = genphy_suspend,
.resume = bcm_omega_resume,
@@ -275,6 +278,7 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
.get_strings = bcm_phy_get_strings,
.get_stats = bcm_omega_get_phy_stats,
.probe = bcm_omega_probe,
+ },
}
};
@@ -868,6 +868,7 @@ static struct phy_driver bcm54140_drivers[] = {
.name = "Broadcom BCM54140",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm54140_config_init,
.handle_interrupt = bcm54140_handle_interrupt,
.config_intr = bcm54140_config_intr,
@@ -879,6 +880,7 @@ static struct phy_driver bcm54140_drivers[] = {
.set_tunable = bcm54140_set_tunable,
.cable_test_start = bcm_phy_cable_test_start_rdb,
.cable_test_get_status = bcm_phy_cable_test_get_status_rdb,
+ },
},
};
module_phy_driver(bcm54140_drivers);
@@ -76,9 +76,11 @@ static struct phy_driver bcm63xx_driver[] = {
.name = "Broadcom BCM63XX (1)",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm63xx_config_init,
.config_intr = bcm63xx_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
+ },
}, {
/* same phy as above, with just a different OUI */
.phy_id = 0x002bdc00,
@@ -86,9 +88,11 @@ static struct phy_driver bcm63xx_driver[] = {
.name = "Broadcom BCM63XX (2)",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm63xx_config_init,
.config_intr = bcm63xx_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
+ },
} };
module_phy_driver(bcm63xx_driver);
@@ -847,6 +847,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_GBIT_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.config_init = bcm7xxx_28nm_config_init, \
.resume = bcm7xxx_28nm_resume, \
.get_tunable = bcm7xxx_28nm_get_tunable, \
@@ -855,6 +856,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.get_strings = bcm_phy_get_strings, \
.get_stats = bcm7xxx_28nm_get_phy_stats, \
.probe = bcm7xxx_28nm_probe, \
+ }, \
}
#define BCM7XXX_28NM_EPHY(_oui, _name) \
@@ -864,6 +866,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.config_init = bcm7xxx_28nm_ephy_config_init, \
.resume = bcm7xxx_28nm_ephy_resume, \
.get_sset_count = bcm_phy_get_sset_count, \
@@ -872,6 +875,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.probe = bcm7xxx_28nm_probe, \
.read_mmd = bcm7xxx_28nm_ephy_read_mmd, \
.write_mmd = bcm7xxx_28nm_ephy_write_mmd, \
+ }, \
}
#define BCM7XXX_40NM_EPHY(_oui, _name) \
@@ -881,10 +885,12 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.soft_reset = genphy_soft_reset, \
.config_init = bcm7xxx_config_init, \
.suspend = bcm7xxx_suspend, \
.resume = bcm7xxx_config_init, \
+ }, \
}
#define BCM7XXX_16NM_EPHY(_oui, _name) \
@@ -894,6 +900,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.get_sset_count = bcm_phy_get_sset_count, \
.get_strings = bcm_phy_get_strings, \
.get_stats = bcm7xxx_28nm_get_phy_stats, \
@@ -902,6 +909,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.config_aneg = genphy_config_aneg, \
.read_status = genphy_read_status, \
.resume = bcm7xxx_16nm_ephy_resume, \
+ }, \
}
static struct phy_driver bcm7xxx_driver[] = {
@@ -240,12 +240,14 @@ static struct phy_driver bcm84881_drivers[] = {
.phy_id = 0xae025150,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM84881",
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm84881_config_init,
.probe = bcm84881_probe,
.get_features = bcm84881_get_features,
.config_aneg = bcm84881_config_aneg,
.aneg_done = bcm84881_aneg_done,
.read_status = bcm84881_read_status,
+ },
},
};
@@ -200,6 +200,7 @@ static struct phy_driver bcm87xx_driver[] = {
.phy_id = PHY_ID_BCM8706,
.phy_id_mask = 0xffffffff,
.name = "Broadcom BCM8706",
+ .ops = &(const struct phy_driver_ops){
.get_features = bcm87xx_get_features,
.config_init = bcm87xx_config_init,
.config_aneg = bcm87xx_config_aneg,
@@ -207,10 +208,12 @@ static struct phy_driver bcm87xx_driver[] = {
.config_intr = bcm87xx_config_intr,
.handle_interrupt = bcm87xx_handle_interrupt,
.match_phy_device = bcm8706_match_phy_device,
+ },
}, {
.phy_id = PHY_ID_BCM8727,
.phy_id_mask = 0xffffffff,
.name = "Broadcom BCM8727",
+ .ops = &(const struct phy_driver_ops){
.get_features = bcm87xx_get_features,
.config_init = bcm87xx_config_init,
.config_aneg = bcm87xx_config_aneg,
@@ -218,6 +221,7 @@ static struct phy_driver bcm87xx_driver[] = {
.config_intr = bcm87xx_config_intr,
.handle_interrupt = bcm87xx_handle_interrupt,
.match_phy_device = bcm8727_match_phy_device,
+ },
} };
module_phy_driver(bcm87xx_driver);
@@ -1068,6 +1068,7 @@ static struct phy_driver broadcom_drivers[] = {
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5411",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1076,11 +1077,13 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
}, {
.phy_id = PHY_ID_BCM5421,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5421",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1089,12 +1092,14 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
}, {
.phy_id = PHY_ID_BCM54210E,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54210E",
/* PHY_GBIT_FEATURES */
.flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1108,11 +1113,13 @@ static struct phy_driver broadcom_drivers[] = {
.get_wol = bcm54xx_phy_get_wol,
.set_wol = bcm54xx_phy_set_wol,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1122,11 +1129,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54612E,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54612E",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1138,11 +1147,13 @@ static struct phy_driver broadcom_drivers[] = {
.led_brightness_set = bcm_phy_led_brightness_set,
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
+ },
}, {
.phy_id = PHY_ID_BCM54616S,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54616S",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = genphy_soft_reset,
.config_init = bcm54xx_config_init,
.config_aneg = bcm54616s_config_aneg,
@@ -1152,11 +1163,13 @@ static struct phy_driver broadcom_drivers[] = {
.probe = bcm54616s_probe,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5464,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5464",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1168,11 +1181,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = genphy_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5481,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5481",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1183,11 +1198,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54810,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54810",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1202,11 +1219,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = bcm54xx_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54811,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54811",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1219,11 +1238,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = bcm54xx_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5482,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5482",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1233,11 +1254,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM50610,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM50610",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1249,11 +1272,13 @@ static struct phy_driver broadcom_drivers[] = {
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM50610M,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM50610M",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1265,11 +1290,13 @@ static struct phy_driver broadcom_drivers[] = {
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM57780,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM57780",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1279,31 +1306,37 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCMAC131,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCMAC131",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+ },
}, {
.phy_id = PHY_ID_BCM5241,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5241",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+ },
}, {
.phy_id = PHY_ID_BCM5221,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5221",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
@@ -1311,24 +1344,28 @@ static struct phy_driver broadcom_drivers[] = {
.resume = brcm_fet_config_init,
.config_aneg = bcm5221_config_aneg,
.read_status = bcm5221_read_status,
+ },
}, {
.phy_id = PHY_ID_BCM5395,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5395",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
.probe = bcm54xx_phy_probe,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM53125,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM53125",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1338,12 +1375,14 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM53128,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM53128",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1353,11 +1392,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM89610,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM89610",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1366,6 +1407,7 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
} };
module_phy_driver(broadcom_drivers);
@@ -130,17 +130,21 @@ static struct phy_driver cis820x_driver[] = {
.name = "Cicada Cis8201",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &cis820x_config_init,
.config_intr = &cis820x_config_intr,
.handle_interrupt = &cis820x_handle_interrupt,
+ },
}, {
.phy_id = 0x000fc440,
.name = "Cicada Cis8204",
.phy_id_mask = 0x000fffc0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &cis820x_config_init,
.config_intr = &cis820x_config_intr,
.handle_interrupt = &cis820x_handle_interrupt,
+ },
} };
module_phy_driver(cis820x_driver);
@@ -79,9 +79,11 @@ static struct phy_driver cortina_driver[] = {
.phy_id_mask = 0xffffffff,
.name = "Cortina CS4340",
.features = PHY_10GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_aneg = gen10g_config_aneg,
.read_status = cortina_read_status,
.probe = cortina_probe,
+ },
},
};
@@ -176,35 +176,43 @@ static struct phy_driver dm91xx_driver[] = {
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x0181b8b0,
.name = "Davicom DM9161B/C",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x0181b8a0,
.name = "Davicom DM9161A",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x00181b80,
.name = "Davicom DM9131",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
} };
module_phy_driver(dm91xx_driver);
@@ -1520,12 +1520,14 @@ static struct phy_driver dp83640_driver = {
.phy_id_mask = 0xfffffff0,
.name = "NatSemi DP83640",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = dp83640_probe,
.remove = dp83640_remove,
.soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
.config_intr = dp83640_config_intr,
.handle_interrupt = dp83640_handle_interrupt,
+ },
};
static int __init dp83640_init(void)
@@ -544,7 +544,7 @@ static int dp83822_phy_reset(struct phy_device *phydev)
if (err < 0)
return err;
- return phydev->drv->config_init(phydev);
+ return phydev->drv->ops->config_init(phydev);
}
#ifdef CONFIG_OF_MDIO
@@ -704,6 +704,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.probe = dp83822_probe, \
.soft_reset = dp83822_phy_reset, \
.config_init = dp83822_config_init, \
@@ -714,6 +715,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}
#define DP83826_PHY_DRIVER(_id, _name) \
@@ -721,6 +723,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.probe = dp83826_probe, \
.soft_reset = dp83822_phy_reset, \
.config_init = dp83826_config_init, \
@@ -730,6 +733,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}
#define DP8382X_PHY_DRIVER(_id, _name) \
@@ -737,6 +741,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.soft_reset = dp83822_phy_reset, \
.config_init = dp8382x_config_init, \
.get_wol = dp83822_get_wol, \
@@ -745,6 +750,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}
static struct phy_driver dp83822_driver[] = {
@@ -139,6 +139,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
.name = _name, \
/* PHY_BASIC_FEATURES */ \
\
+ .ops = &(const struct phy_driver_ops){\
.soft_reset = genphy_soft_reset, \
.config_init = _config_init, \
.suspend = genphy_suspend, \
@@ -147,6 +148,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
/* IRQ related */ \
.config_intr = dp83848_config_intr, \
.handle_interrupt = dp83848_handle_interrupt, \
+ }, \
}
static struct phy_driver dp83848_driver[] = {
@@ -1180,6 +1180,7 @@ static struct phy_driver dp83867_driver[] = {
.name = "TI DP83867",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = dp83867_probe,
.config_init = dp83867_config_init,
.soft_reset = dp83867_phy_reset,
@@ -1206,6 +1207,7 @@ static struct phy_driver dp83867_driver[] = {
.led_hw_control_set = dp83867_led_hw_control_set,
.led_hw_control_get = dp83867_led_hw_control_get,
.led_polarity_set = dp83867_led_polarity_set,
+ },
},
};
module_phy_driver(dp83867_driver);
@@ -893,6 +893,7 @@ static int dp83869_phy_reset(struct phy_device *phydev)
{ \
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
+ .ops = &(const struct phy_driver_ops){ \
.probe = dp83869_probe, \
.config_init = dp83869_config_init, \
.soft_reset = dp83869_phy_reset, \
@@ -905,6 +906,7 @@ static int dp83869_phy_reset(struct phy_device *phydev)
.set_wol = dp83869_set_wol, \
.suspend = genphy_suspend, \
.resume = genphy_resume, \
+ }, \
}
static struct phy_driver dp83869_driver[] = {
@@ -390,6 +390,7 @@ static struct phy_driver dp83811_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "TI DP83TC811",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dp83811_config_init,
.config_aneg = dp83811_config_aneg,
.soft_reset = dp83811_phy_reset,
@@ -399,6 +400,7 @@ static struct phy_driver dp83811_driver[] = {
.handle_interrupt = dp83811_handle_interrupt,
.suspend = dp83811_suspend,
.resume = dp83811_resume,
+ },
},
};
module_phy_driver(dp83811_driver);
@@ -221,6 +221,7 @@ static struct phy_driver dp83td510_driver[] = {
PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
.name = "TI DP83TD510E",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = dp83td510_config_aneg,
.read_status = dp83td510_read_status,
.get_features = dp83td510_get_features,
@@ -231,6 +232,7 @@ static struct phy_driver dp83td510_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(dp83td510_driver);
@@ -165,6 +165,7 @@ static struct phy_driver dp83tg720_driver[] = {
PHY_ID_MATCH_MODEL(DP83TG720S_PHY_ID),
.name = "TI DP83TG720S",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = dp83tg720_config_aneg,
.read_status = dp83tg720_read_status,
.get_features = genphy_c45_pma_read_ext_abilities,
@@ -174,6 +175,7 @@ static struct phy_driver dp83tg720_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(dp83tg720_driver);
@@ -88,8 +88,10 @@ static struct phy_driver et1011c_driver[] = { {
.name = "ET1011C",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_aneg = et1011c_config_aneg,
.read_status = et1011c_read_status,
+ },
} };
module_phy_driver(et1011c_driver);
@@ -576,21 +576,26 @@ static struct phy_driver icplus_driver[] = {
PHY_ID_MATCH_MODEL(IP175C_PHY_ID),
.name = "ICPlus IP175C",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ip175c_config_init,
.config_aneg = ip175c_config_aneg,
.read_status = ip175c_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
PHY_ID_MATCH_MODEL(IP1001_PHY_ID),
.name = "ICPlus IP1001",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ip1001_config_init,
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.name = "ICPlus IP101A",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = ip101a_match_phy_device,
.probe = ip101a_g_probe,
.read_page = ip101a_read_page,
@@ -603,8 +608,10 @@ static struct phy_driver icplus_driver[] = {
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.name = "ICPlus IP101G",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = ip101g_match_phy_device,
.probe = ip101a_g_probe,
.read_page = ip101g_read_page,
@@ -620,6 +627,7 @@ static struct phy_driver icplus_driver[] = {
.get_stats = ip101g_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(icplus_driver);
@@ -353,105 +353,125 @@ static struct phy_driver xway_gphy[] = {
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_3,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.3",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_1_4,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_4,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.4",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_1_5,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_5,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_VR9_1_1,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_VR9_1_1,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
},
};
module_phy_driver(xway_gphy);
@@ -311,39 +311,47 @@ static struct phy_driver lxt97x_driver[] = {
.name = "LXT970",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = lxt970_config_init,
.config_intr = lxt970_config_intr,
.handle_interrupt = lxt970_handle_interrupt,
+ },
}, {
.phy_id = 0x001378e0,
.name = "LXT971",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_intr = lxt971_config_intr,
.handle_interrupt = lxt971_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x00137a10,
.name = "LXT973-A2",
.phy_id_mask = 0xffffffff,
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.probe = lxt973_probe,
.config_aneg = lxt973_config_aneg,
.read_status = lxt973a2_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x00137a10,
.name = "LXT973",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.probe = lxt973_probe,
.config_aneg = lxt973_config_aneg,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(lxt97x_driver);
@@ -240,6 +240,7 @@ static struct phy_driver mv88q2xxx_driver[] = {
.phy_id = MARVELL_PHY_ID_88Q2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88q2110",
+ .ops = &(const struct phy_driver_ops){
.get_features = mv88q2xxx_get_features,
.config_aneg = mv88q2xxx_config_aneg,
.config_init = mv88q2xxx_config_init,
@@ -248,6 +249,7 @@ static struct phy_driver mv88q2xxx_driver[] = {
.set_loopback = genphy_c45_loopback,
.get_sqi = mv88q2xxxx_get_sqi,
.get_sqi_max = mv88q2xxxx_get_sqi_max,
+ },
},
};
@@ -600,6 +600,7 @@ static struct phy_driver mv2222_drivers[] = {
.phy_id = MARVELL_PHY_ID_88X2222,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88X2222",
+ .ops = &(const struct phy_driver_ops){
.get_features = mv2222_get_features,
.soft_reset = mv2222_soft_reset,
.config_init = mv2222_config_init,
@@ -609,6 +610,7 @@ static struct phy_driver mv2222_drivers[] = {
.suspend = mv2222_suspend,
.resume = mv2222_resume,
.read_status = mv2222_read_status,
+ },
},
};
module_phy_driver(mv2222_drivers);
@@ -3273,6 +3273,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_config_init,
.config_aneg = m88e1101_config_aneg,
@@ -3285,12 +3286,14 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1112,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1112_config_init,
.config_aneg = marvell_config_aneg,
@@ -3305,12 +3308,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1111,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
@@ -3326,12 +3331,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1111_FINISAR,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111 (Finisar)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
@@ -3347,12 +3354,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1118,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1118_config_init,
.config_aneg = m88e1118_config_aneg,
@@ -3365,6 +3374,7 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1121R,
@@ -3372,6 +3382,7 @@ static struct phy_driver marvell_drivers[] = {
.name = "Marvell 88E1121R",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1121_hwmon_ops),
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1121_config_aneg,
@@ -3387,12 +3398,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1318S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1318S",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1318_config_init,
.config_aneg = m88e1318_config_aneg,
@@ -3413,12 +3426,14 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1145,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1145_config_init,
.config_aneg = m88e1101_config_aneg,
@@ -3433,12 +3448,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1149R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1149R",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1149_config_init,
.config_aneg = m88e1118_config_aneg,
@@ -3451,12 +3468,14 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1240,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1112_config_init,
.config_aneg = marvell_config_aneg,
@@ -3471,12 +3490,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1116R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1116R",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1116r_config_init,
.config_intr = marvell_config_intr,
@@ -3490,6 +3511,7 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1510,
@@ -3498,6 +3520,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
.features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = m88e1510_probe,
.config_init = m88e1510_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3524,6 +3547,7 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1540,
@@ -3532,6 +3556,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3555,15 +3580,17 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1545",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- .probe = marvell_probe,
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
+ .probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -3586,12 +3613,14 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E3016,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E3016",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e3016_config_init,
.aneg_done = marvell_aneg_done,
@@ -3605,6 +3634,7 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
@@ -3613,6 +3643,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e6390_config_aneg,
@@ -3631,6 +3662,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
@@ -3639,6 +3671,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e6390_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e6390_config_aneg,
@@ -3657,6 +3690,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6393_FAMILY,
@@ -3665,6 +3699,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e6393_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3683,12 +3718,14 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1340S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1340S",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
/* PHY_GBIT_FEATURES */
.config_init = marvell_1011gbe_config_init,
@@ -3705,14 +3742,16 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1548P,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1548P",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- .probe = marvell_probe,
.features = PHY_GBIT_FIBRE_FEATURES,
+ .ops = &(const struct phy_driver_ops){
+ .probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -3732,6 +3771,7 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
};
@@ -1403,9 +1403,10 @@ static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv3310_match_phy_device,
.name = "mv88x3310",
.driver_data = &mv3310_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv3310_match_phy_device,
.get_features = mv3310_get_features,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
@@ -1420,13 +1421,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_loopback = genphy_c45_loopback,
.get_wol = mv3110_get_wol,
.set_wol = mv3110_set_wol,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88X3310,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv3340_match_phy_device,
.name = "mv88x3340",
.driver_data = &mv3340_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv3340_match_phy_device,
.get_features = mv3310_get_features,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
@@ -1439,13 +1442,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv2110_match_phy_device,
.name = "mv88e2110",
.driver_data = &mv2110_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv2110_match_phy_device,
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
@@ -1459,13 +1464,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_loopback = genphy_c45_loopback,
.get_wol = mv3110_get_wol,
.set_wol = mv3110_set_wol,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv2111_match_phy_device,
.name = "mv88e2111",
.driver_data = &mv2111_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv2111_match_phy_device,
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
@@ -1477,6 +1484,7 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ },
},
};
@@ -1497,6 +1497,7 @@ static struct phy_driver mtk_socphy_driver[] = {
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
.name = "MediaTek MT7981 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt798x_phy_config_init,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
@@ -1510,10 +1511,12 @@ static struct phy_driver mtk_socphy_driver[] = {
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
.led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
},
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
.name = "MediaTek MT7988 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt798x_phy_config_init,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
@@ -1527,6 +1530,7 @@ static struct phy_driver mtk_socphy_driver[] = {
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
.led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
},
};
@@ -72,6 +72,7 @@ static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(0x03a29412),
.name = "MediaTek MT7530 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt7530_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -82,10 +83,12 @@ static struct phy_driver mtk_gephy_driver[] = {
.resume = genphy_resume,
.read_page = mtk_gephy_read_page,
.write_page = mtk_gephy_write_page,
+ },
},
{
PHY_ID_MATCH_EXACT(0x03a29441),
.name = "MediaTek MT7531 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt7531_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -96,6 +99,7 @@ static struct phy_driver mtk_gephy_driver[] = {
.resume = genphy_resume,
.read_page = mtk_gephy_read_page,
.write_page = mtk_gephy_write_page,
+ },
},
};
@@ -190,6 +190,7 @@ static struct phy_driver meson_gxl_phy[] = {
.name = "Meson GXL Internal PHY",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.soft_reset = genphy_soft_reset,
.config_init = meson_gxl_config_init,
.read_status = meson_gxl_read_status,
@@ -199,11 +200,13 @@ static struct phy_driver meson_gxl_phy[] = {
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
}, {
PHY_ID_MATCH_EXACT(0x01803301),
.name = "Meson G12A Internal PHY",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
.config_init = smsc_phy_config_init,
.soft_reset = genphy_soft_reset,
@@ -218,6 +221,7 @@ static struct phy_driver meson_gxl_phy[] = {
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
},
};
@@ -1502,8 +1502,8 @@ static int ksz9031_read_status(struct phy_device *phydev)
if ((regval & 0xFF) == 0xFF) {
phy_init_hw(phydev);
phydev->link = 0;
- if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr && phy_interrupt_is_valid(phydev))
+ phydev->drv->ops->config_intr(phydev);
return genphy_config_aneg(phydev);
}
@@ -1940,8 +1940,8 @@ static int kszphy_suspend(struct phy_device *phydev)
/* Disable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_DISABLED;
- if (phydev->drv->config_intr)
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr)
+ phydev->drv->ops->config_intr(phydev);
}
return genphy_suspend(phydev);
@@ -1990,8 +1990,8 @@ static int kszphy_resume(struct phy_device *phydev)
/* Enable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_ENABLED;
- if (phydev->drv->config_intr)
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr)
+ phydev->drv->ops->config_intr(phydev);
}
return 0;
@@ -4633,18 +4633,21 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KS8737",
/* PHY_BASIC_FEATURES */
.driver_data = &ks8737_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8021,
.phy_id_mask = 0x00ffffff,
.name = "Micrel KSZ8021 or KSZ8031",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4654,12 +4657,14 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8031,
.phy_id_mask = 0x00ffffff,
.name = "Micrel KSZ8031",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4669,12 +4674,14 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8041,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8041",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8041_config_init,
.config_aneg = ksz8041_config_aneg,
@@ -4686,12 +4693,14 @@ static struct phy_driver ksphy_driver[] = {
/* No suspend/resume callbacks because of errata DS80000700A,
* receiver error following software power down.
*/
+ },
}, {
.phy_id = PHY_ID_KSZ8041RNLI,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8041RNLI",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4701,10 +4710,12 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.name = "Micrel KSZ8051",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8051_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4715,12 +4726,14 @@ static struct phy_driver ksphy_driver[] = {
.match_phy_device = ksz8051_match_phy_device,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8001,
.name = "Micrel KSZ8001 or KS8721",
.phy_id_mask = 0x00fffffc,
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4730,6 +4743,7 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8081,
.name = "Micrel KSZ8081 or KSZ8091",
@@ -4737,6 +4751,7 @@ static struct phy_driver ksphy_driver[] = {
.flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8081_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8081_config_init,
.soft_reset = genphy_soft_reset,
@@ -4751,23 +4766,27 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.cable_test_start = ksz886x_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_KSZ8061,
.name = "Micrel KSZ8061",
.phy_id_mask = MICREL_PHY_ID_MASK,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8061_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
/* PHY_GBIT_FEATURES */
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
.config_init = ksz9021_config_init,
@@ -4780,12 +4799,14 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
}, {
.phy_id = PHY_ID_KSZ9031,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ9031 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
.config_init = ksz9031_config_init,
@@ -4800,13 +4821,15 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.cable_test_start = ksz9x31_cable_test_start,
.cable_test_get_status = ksz9x31_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_LAN8814,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip INDY Gigabit Quad PHY",
.flags = PHY_POLL_CABLE_TEST,
- .config_init = lan8814_config_init,
.driver_data = &lan8814_type,
+ .ops = &(const struct phy_driver_ops){
+ .config_init = lan8814_config_init,
.probe = lan8814_probe,
.soft_reset = genphy_soft_reset,
.read_status = ksz9031_read_status,
@@ -4819,12 +4842,14 @@ static struct phy_driver ksphy_driver[] = {
.handle_interrupt = lan8814_handle_interrupt,
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_LAN8804,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip LAN966X Gigabit PHY",
- .config_init = lan8804_config_init,
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
+ .config_init = lan8804_config_init,
.probe = kszphy_probe,
.soft_reset = genphy_soft_reset,
.read_status = ksz9031_read_status,
@@ -4835,12 +4860,14 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.config_intr = lan8804_config_intr,
.handle_interrupt = lan8804_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_LAN8841,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip LAN8841 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &lan8841_type,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan8841_config_init,
.probe = lan8841_probe,
.soft_reset = genphy_soft_reset,
@@ -4853,6 +4880,7 @@ static struct phy_driver ksphy_driver[] = {
.resume = genphy_resume,
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -4860,6 +4888,7 @@ static struct phy_driver ksphy_driver[] = {
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9131_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.soft_reset = genphy_soft_reset,
.config_init = ksz9131_config_init,
@@ -4875,16 +4904,19 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_start = ksz9x31_cable_test_start,
.cable_test_get_status = ksz9x31_cable_test_get_status,
.get_features = ksz9477_get_features,
+ },
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8873MLL Switch",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.config_aneg = ksz8873mll_config_aneg,
.read_status = ksz8873mll_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ886X,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -4892,6 +4924,7 @@ static struct phy_driver ksphy_driver[] = {
.driver_data = &ksz886x_type,
/* PHY_BASIC_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.config_aneg = ksz886x_config_aneg,
.read_status = ksz886x_read_status,
@@ -4899,24 +4932,29 @@ static struct phy_driver ksphy_driver[] = {
.resume = genphy_resume,
.cable_test_start = ksz886x_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.name = "Micrel KSZ87XX Switch",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.match_phy_device = ksz8795_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ9477,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9477",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ksz9477_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.get_features = ksz9477_get_features,
+ },
} };
module_phy_driver(ksphy_driver);
@@ -384,6 +384,7 @@ static struct phy_driver microchip_phy_driver[] = {
.name = "Microchip LAN88xx",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = lan88xx_probe,
.remove = lan88xx_remove,
@@ -400,6 +401,7 @@ static struct phy_driver microchip_phy_driver[] = {
.set_wol = lan88xx_set_wol,
.read_page = lan88xx_read_page,
.write_page = lan88xx_write_page,
+ },
} };
module_phy_driver(microchip_phy_driver);
@@ -866,6 +866,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.name = "Microchip LAN87xx T1",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan87xx_config_init,
.config_intr = lan87xx_phy_config_intr,
.handle_interrupt = lan87xx_handle_interrupt,
@@ -877,12 +878,14 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_LAN937X),
.name = "Microchip LAN937x T1",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan87xx_config_init,
.config_intr = lan87xx_phy_config_intr,
.handle_interrupt = lan87xx_handle_interrupt,
@@ -894,6 +897,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
+ },
}
};
@@ -273,21 +273,25 @@ static struct phy_driver microchip_t1s_driver[] = {
PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1),
.name = "LAN867X Rev.B1",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan867x_revb1_config_init,
.read_status = lan86xx_read_status,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0),
.name = "LAN865X Rev.B0 Internal Phy",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan865x_revb0_config_init,
.read_status = lan86xx_read_status,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
+ },
},
};
@@ -2256,15 +2256,18 @@ static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
.name = "YT8511 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = yt8511_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = yt8511_read_page,
.write_page = yt8511_write_page,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8521),
.name = "YT8521 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.get_features = yt8521_get_features,
.probe = yt8521_probe,
.read_page = yt8521_read_page,
@@ -2278,10 +2281,12 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.soft_reset = yt8521_soft_reset,
.suspend = yt8521_suspend,
.resume = yt8521_resume,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
.name = "YT8531 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.probe = yt8531_probe,
.config_init = yt8531_config_init,
.suspend = genphy_suspend,
@@ -2289,10 +2294,12 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.get_wol = ytphy_get_wol,
.set_wol = yt8531_set_wol,
.link_change_notify = yt8531_link_change_notify,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
.name = "YT8531S Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.get_features = yt8521_get_features,
.probe = yt8521_probe,
.read_page = yt8521_read_page,
@@ -2306,6 +2313,7 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.soft_reset = yt8521_soft_reset,
.suspend = yt8521_suspend,
.resume = yt8521_resume,
+ },
},
};
@@ -2342,6 +2342,7 @@ static struct phy_driver vsc85xx_driver[] = {
.name = "Microsemi GE VSC8501 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2360,12 +2361,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8502,
.name = "Microsemi GE VSC8502 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2384,12 +2387,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8504,
.name = "Microsemi GE VSC8504 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2409,11 +2414,13 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8514,
.name = "Microsemi GE VSC8514 SyncE",
.phy_id_mask = 0xfffffff0,
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8514_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2432,12 +2439,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8530,
.name = "Microsemi FE VSC8530",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2456,12 +2465,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8531,
.name = "Microsemi VSC8531",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2480,12 +2491,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8540,
.name = "Microsemi FE VSC8540 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2504,12 +2517,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8541,
.name = "Microsemi VSC8541 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2528,12 +2543,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8552,
.name = "Microsemi GE VSC8552 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2552,12 +2569,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC856X,
.name = "Microsemi GE VSC856X SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2574,12 +2593,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8572,
.name = "Microsemi GE VSC8572 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2599,12 +2620,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8574,
.name = "Microsemi GE VSC8574 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2624,12 +2647,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8575,
.name = "Microsemi GE VSC8575 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2647,12 +2672,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8582,
.name = "Microsemi GE VSC8582 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2670,12 +2697,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8584,
.name = "Microsemi GE VSC8584 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2694,6 +2723,7 @@ static struct phy_driver vsc85xx_driver[] = {
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
.link_change_notify = &vsc85xx_link_change_notify,
+ },
}
};
@@ -813,6 +813,7 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
.name = "Maxlinear Ethernet GPY2xx",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -826,11 +827,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY115B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY115B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -844,10 +847,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
.name = "Maxlinear Ethernet GPY115C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -861,11 +866,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY211B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY211B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -879,10 +886,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
.name = "Maxlinear Ethernet GPY211C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -896,11 +905,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY212B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY212B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -914,10 +925,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
.name = "Maxlinear Ethernet GPY212C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -931,11 +944,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY215B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY215B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -949,10 +964,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
.name = "Maxlinear Ethernet GPY215C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -966,10 +983,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
.name = "Maxlinear Ethernet GPY241B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -983,10 +1002,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM),
.name = "Maxlinear Ethernet GPY241BM",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -1000,10 +1021,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY245B),
.name = "Maxlinear Ethernet GPY245B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -1017,6 +1040,7 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
};
module_phy_driver(gpy_drivers);
@@ -162,9 +162,11 @@ static struct phy_driver dp83865_driver[] = { {
.phy_id_mask = 0xfffffff0,
.name = "NatSemi DP83865",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ns_config_init,
.config_intr = ns_config_intr,
.handle_interrupt = ns_handle_interrupt,
+ },
} };
module_phy_driver(dp83865_driver);
@@ -145,6 +145,7 @@ static struct phy_driver ncn26000_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_NCN26000),
.name = "NCN26000",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = ncn26000_config_init,
.config_intr = ncn26000_config_intr,
.config_aneg = ncn26000_config_aneg,
@@ -154,6 +155,7 @@ static struct phy_driver ncn26000_driver[] = {
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
.soft_reset = genphy_soft_reset,
+ },
},
};
@@ -1929,8 +1929,9 @@ static struct phy_driver nxp_c45_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_TJA_1103),
.name = "NXP C45 TJA1103",
- .get_features = nxp_c45_get_features,
.driver_data = &tja1103_phy_data,
+ .ops = &(const struct phy_driver_ops){
+ .get_features = nxp_c45_get_features,
.probe = nxp_c45_probe,
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
@@ -1949,12 +1950,14 @@ static struct phy_driver nxp_c45_driver[] = {
.get_sqi = nxp_c45_get_sqi,
.get_sqi_max = nxp_c45_get_sqi_max,
.remove = nxp_c45_remove,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_TJA_1120),
.name = "NXP C45 TJA1120",
- .get_features = nxp_c45_get_features,
.driver_data = &tja1120_phy_data,
+ .ops = &(const struct phy_driver_ops){
+ .get_features = nxp_c45_get_features,
.probe = nxp_c45_probe,
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
@@ -1974,6 +1977,7 @@ static struct phy_driver nxp_c45_driver[] = {
.get_sqi = nxp_c45_get_sqi,
.get_sqi_max = nxp_c45_get_sqi_max,
.remove = nxp_c45_remove,
+ },
},
};
@@ -199,6 +199,7 @@ static struct phy_driver cbtx_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110),
.name = "NXP CBTX (SJA1110)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = cbtx_soft_reset,
.config_init = cbtx_config_init,
.suspend = genphy_suspend,
@@ -210,6 +211,7 @@ static struct phy_driver cbtx_driver[] = {
.get_sset_count = cbtx_get_sset_count,
.get_strings = cbtx_get_strings,
.get_stats = cbtx_get_stats,
+ },
},
};
@@ -205,22 +205,22 @@ static int tja11xx_config_aneg_cable_test(struct phy_device *phydev)
if (phydev->link)
return 0;
- if (!phydev->drv->cable_test_start ||
- !phydev->drv->cable_test_get_status)
+ if (!phydev->drv->ops->cable_test_start ||
+ !phydev->drv->ops->cable_test_get_status)
return 0;
ret = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
if (ret)
return ret;
- ret = phydev->drv->cable_test_start(phydev);
+ ret = phydev->drv->ops->cable_test_start(phydev);
if (ret)
return ret;
/* According to the documentation this test takes 100 usec */
usleep_range(100, 200);
- ret = phydev->drv->cable_test_get_status(phydev, &finished);
+ ret = phydev->drv->ops->cable_test_get_status(phydev, &finished);
if (ret)
return ret;
@@ -805,6 +805,7 @@ static struct phy_driver tja11xx_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
.name = "NXP TJA1100",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -819,10 +820,12 @@ static struct phy_driver tja11xx_driver[] = {
.get_sset_count = tja11xx_get_sset_count,
.get_strings = tja11xx_get_strings,
.get_stats = tja11xx_get_stats,
+ },
}, {
PHY_ID_MATCH_MODEL(PHY_ID_TJA1101),
.name = "NXP TJA1101",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -837,10 +840,12 @@ static struct phy_driver tja11xx_driver[] = {
.get_sset_count = tja11xx_get_sset_count,
.get_strings = tja11xx_get_strings,
.get_stats = tja11xx_get_stats,
+ },
}, {
.name = "NXP TJA1102 Port 0",
.features = PHY_BASIC_T1_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = tja1102_p0_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -860,11 +865,13 @@ static struct phy_driver tja11xx_driver[] = {
.handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
+ },
}, {
.name = "NXP TJA1102 Port 1",
.features = PHY_BASIC_T1_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
/* currently no probe for Port 1 is need */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
@@ -883,6 +890,7 @@ static struct phy_driver tja11xx_driver[] = {
.handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
+ },
}
};
@@ -1522,5 +1522,7 @@ struct phy_driver genphy_c45_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic Clause 45 PHY",
+ .ops = &(const struct phy_driver_ops){
.read_status = genphy_c45_read_status,
+ },
};
@@ -576,8 +576,8 @@ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;
- if (phydev->drv && phydev->drv->read_mmd)
- return phydev->drv->read_mmd(phydev, devad, regnum);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->read_mmd)
+ return phydev->drv->ops->read_mmd(phydev, devad, regnum);
return mmd_phy_read(phydev->mdio.bus, phydev->mdio.addr,
phydev->is_c45, devad, regnum);
@@ -620,8 +620,8 @@ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;
- if (phydev->drv && phydev->drv->write_mmd)
- return phydev->drv->write_mmd(phydev, devad, regnum, val);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->write_mmd)
+ return phydev->drv->ops->write_mmd(phydev, devad, regnum, val);
return mmd_phy_write(phydev->mdio.bus, phydev->mdio.addr,
phydev->is_c45, devad, regnum, val);
@@ -968,18 +968,20 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
static int __phy_read_page(struct phy_device *phydev)
{
- if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
+ if (WARN_ONCE(!phydev->drv->ops || !phydev->drv->ops->read_page,
+ "read_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
- return phydev->drv->read_page(phydev);
+ return phydev->drv->ops->read_page(phydev);
}
static int __phy_write_page(struct phy_device *phydev, int page)
{
- if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
+ if (WARN_ONCE(!phydev->drv->ops || !phydev->drv->ops->write_page,
+ "write_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
- return phydev->drv->write_page(phydev, page);
+ return phydev->drv->ops->write_page(phydev, page);
}
/**
@@ -65,8 +65,9 @@ static void phy_process_state_change(struct phy_device *phydev,
phydev_dbg(phydev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state),
phy_state_to_str(phydev->state));
- if (phydev->drv && phydev->drv->link_change_notify)
- phydev->drv->link_change_notify(phydev);
+ if (phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->link_change_notify)
+ phydev->drv->ops->link_change_notify(phydev);
}
}
@@ -145,9 +146,9 @@ int phy_get_rate_matching(struct phy_device *phydev,
{
int ret = RATE_MATCH_NONE;
- if (phydev->drv->get_rate_matching) {
+ if (phydev->drv->ops && phydev->drv->ops->get_rate_matching) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_rate_matching(phydev, iface);
+ ret = phydev->drv->ops->get_rate_matching(phydev, iface);
mutex_unlock(&phydev->lock);
}
@@ -165,8 +166,8 @@ EXPORT_SYMBOL_GPL(phy_get_rate_matching);
static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
{
phydev->interrupts = interrupts ? 1 : 0;
- if (phydev->drv->config_intr)
- return phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->config_intr)
+ return phydev->drv->ops->config_intr(phydev);
return 0;
}
@@ -201,8 +202,8 @@ EXPORT_SYMBOL_GPL(phy_restart_aneg);
*/
int phy_aneg_done(struct phy_device *phydev)
{
- if (phydev->drv && phydev->drv->aneg_done)
- return phydev->drv->aneg_done(phydev);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->aneg_done)
+ return phydev->drv->ops->aneg_done(phydev);
else if (phydev->is_c45)
return genphy_c45_aneg_done(phydev);
else
@@ -552,11 +553,11 @@ static void phy_abort_cable_test(struct phy_device *phydev)
*/
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
{
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;
mutex_lock(&phydev->lock);
- phydev->drv->get_strings(phydev, data);
+ phydev->drv->ops->get_strings(phydev, data);
mutex_unlock(&phydev->lock);
return 0;
@@ -572,14 +573,14 @@ int phy_ethtool_get_sset_count(struct phy_device *phydev)
{
int ret;
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;
- if (phydev->drv->get_sset_count &&
- phydev->drv->get_strings &&
- phydev->drv->get_stats) {
+ if (phydev->drv->ops->get_sset_count &&
+ phydev->drv->ops->get_strings &&
+ phydev->drv->ops->get_stats) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_sset_count(phydev);
+ ret = phydev->drv->ops->get_sset_count(phydev);
mutex_unlock(&phydev->lock);
return ret;
@@ -599,11 +600,11 @@ EXPORT_SYMBOL(phy_ethtool_get_sset_count);
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;
mutex_lock(&phydev->lock);
- phydev->drv->get_stats(phydev, stats, data);
+ phydev->drv->ops->get_stats(phydev, stats, data);
mutex_unlock(&phydev->lock);
return 0;
@@ -628,13 +629,13 @@ int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
goto out;
}
- if (!phydev->drv->get_plca_cfg) {
+ if (!phydev->drv->ops || phydev->drv->ops->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+ ret = phydev->drv->ops->get_plca_cfg(phydev, plca_cfg);
mutex_unlock(&phydev->lock);
out:
@@ -691,8 +692,9 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
goto out;
}
- if (!phydev->drv->set_plca_cfg ||
- !phydev->drv->get_plca_cfg) {
+ if (!phydev->drv->ops ||
+ !phydev->drv->ops->set_plca_cfg ||
+ !phydev->drv->ops->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -705,7 +707,7 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+ ret = phydev->drv->ops->get_plca_cfg(phydev, curr_plca_cfg);
if (ret)
goto out_drv;
@@ -762,7 +764,7 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
goto out_drv;
}
- ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+ ret = phydev->drv->ops->set_plca_cfg(phydev, plca_cfg);
out_drv:
kfree(curr_plca_cfg);
@@ -789,13 +791,14 @@ int phy_ethtool_get_plca_status(struct phy_device *phydev,
goto out;
}
- if (!phydev->drv->get_plca_status) {
+ if (!phydev->drv->ops ||
+ !phydev->drv->ops->get_plca_status) {
ret = -EOPNOTSUPP;
goto out;
}
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_plca_status(phydev, plca_st);
+ ret = phydev->drv->ops->get_plca_status(phydev, plca_st);
mutex_unlock(&phydev->lock);
out:
@@ -814,9 +817,9 @@ int phy_start_cable_test(struct phy_device *phydev,
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;
- if (!(phydev->drv &&
- phydev->drv->cable_test_start &&
- phydev->drv->cable_test_get_status)) {
+ if (!(phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->cable_test_start &&
+ phydev->drv->ops->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable testing");
return -EOPNOTSUPP;
@@ -846,7 +849,7 @@ int phy_start_cable_test(struct phy_device *phydev,
phy_link_down(phydev);
netif_testing_on(dev);
- err = phydev->drv->cable_test_start(phydev);
+ err = phydev->drv->ops->cable_test_start(phydev);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
@@ -885,9 +888,9 @@ int phy_start_cable_test_tdr(struct phy_device *phydev,
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;
- if (!(phydev->drv &&
- phydev->drv->cable_test_tdr_start &&
- phydev->drv->cable_test_get_status)) {
+ if (!(phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->cable_test_tdr_start &&
+ phydev->drv->ops->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable test TDR");
return -EOPNOTSUPP;
@@ -917,7 +920,7 @@ int phy_start_cable_test_tdr(struct phy_device *phydev,
phy_link_down(phydev);
netif_testing_on(dev);
- err = phydev->drv->cable_test_tdr_start(phydev, config);
+ err = phydev->drv->ops->cable_test_tdr_start(phydev, config);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
@@ -944,8 +947,8 @@ EXPORT_SYMBOL(phy_start_cable_test_tdr);
int phy_config_aneg(struct phy_device *phydev)
{
- if (phydev->drv->config_aneg)
- return phydev->drv->config_aneg(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->config_aneg)
+ return phydev->drv->ops->config_aneg(phydev);
/* Clause 45 PHYs that don't implement Clause 22 registers are not
* allowed to call genphy_config_aneg()
@@ -1315,7 +1318,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
}
mutex_lock(&phydev->lock);
- ret = phydev->drv->handle_interrupt(phydev);
+ ret = phydev->drv->ops->handle_interrupt(phydev);
mutex_unlock(&phydev->lock);
return ret;
@@ -1401,7 +1404,7 @@ static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
func = &phy_check_link_status;
break;
case PHY_CABLETEST:
- err = phydev->drv->cable_test_get_status(phydev, &finished);
+ err = phydev->drv->ops->cable_test_get_status(phydev, &finished);
if (err) {
phy_abort_cable_test(phydev);
netif_testing_off(dev);
@@ -1683,9 +1686,9 @@ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
int ret;
- if (phydev->drv && phydev->drv->set_wol) {
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->set_wol) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->set_wol(phydev, wol);
+ ret = phydev->drv->ops->set_wol(phydev, wol);
mutex_unlock(&phydev->lock);
return ret;
@@ -1703,9 +1706,9 @@ EXPORT_SYMBOL(phy_ethtool_set_wol);
*/
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
- if (phydev->drv && phydev->drv->get_wol) {
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->get_wol) {
mutex_lock(&phydev->lock);
- phydev->drv->get_wol(phydev, wol);
+ phydev->drv->ops->get_wol(phydev, wol);
mutex_unlock(&phydev->lock);
}
}
@@ -274,7 +274,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
struct phy_driver *phydrv = to_phy_driver(drv);
struct net_device *netdev = phydev->attached_dev;
- if (!drv || !phydrv->suspend)
+ if (!drv || !phydrv->ops || !phydrv->ops->suspend)
return false;
/* PHY not attached? May suspend if the PHY has not already been
@@ -532,8 +532,8 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv)
if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
return 0;
- if (phydrv->match_phy_device)
- return phydrv->match_phy_device(phydev);
+ if (phydrv->ops && phydrv->ops->match_phy_device)
+ return phydrv->ops->match_phy_device(phydev);
if (phydev->is_c45) {
for (i = 1; i < num_ids; i++) {
@@ -1235,11 +1235,11 @@ int phy_init_hw(struct phy_device *phydev)
/* Deassert the reset signal */
phy_device_reset(phydev, 0);
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return 0;
- if (phydev->drv->soft_reset) {
- ret = phydev->drv->soft_reset(phydev);
+ if (phydev->drv->ops->soft_reset) {
+ ret = phydev->drv->ops->soft_reset(phydev);
if (ret < 0)
return ret;
@@ -1253,14 +1253,14 @@ int phy_init_hw(struct phy_device *phydev)
phy_interface_zero(phydev->possible_interfaces);
- if (phydev->drv->config_init) {
- ret = phydev->drv->config_init(phydev);
+ if (phydev->drv->ops->config_init) {
+ ret = phydev->drv->ops->config_init(phydev);
if (ret < 0)
return ret;
}
- if (phydev->drv->config_intr) {
- ret = phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr) {
+ ret = phydev->drv->ops->config_intr(phydev);
if (ret < 0)
return ret;
}
@@ -1419,7 +1419,7 @@ EXPORT_SYMBOL(phy_sfp_probe);
static bool phy_drv_supports_irq(const struct phy_driver *phydrv)
{
- return phydrv->config_intr && phydrv->handle_interrupt;
+ return phydrv->ops && phydrv->ops->config_intr && phydrv->ops->handle_interrupt;
}
/**
@@ -1978,10 +1978,10 @@ int phy_suspend(struct phy_device *phydev)
if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
return -EBUSY;
- if (!phydrv || !phydrv->suspend)
+ if (!phydrv || !phydrv->ops || !phydrv->ops->suspend)
return 0;
- ret = phydrv->suspend(phydev);
+ ret = phydrv->ops->suspend(phydev);
if (!ret)
phydev->suspended = true;
@@ -1996,10 +1996,10 @@ int __phy_resume(struct phy_device *phydev)
lockdep_assert_held(&phydev->lock);
- if (!phydrv || !phydrv->resume)
+ if (!phydrv || !phydrv->ops || !phydrv->ops->resume)
return 0;
- ret = phydrv->resume(phydev);
+ ret = phydrv->ops->resume(phydev);
if (!ret)
phydev->suspended = false;
@@ -2038,8 +2038,8 @@ int phy_loopback(struct phy_device *phydev, bool enable)
goto out;
}
- if (phydev->drv->set_loopback)
- ret = phydev->drv->set_loopback(phydev, enable);
+ if (phydev->drv->ops && phydev->drv->ops->set_loopback)
+ ret = phydev->drv->ops->set_loopback(phydev, enable);
else
ret = genphy_loopback(phydev, enable);
@@ -3130,7 +3130,7 @@ static int phy_led_set_brightness(struct led_classdev *led_cdev,
int err;
mutex_lock(&phydev->lock);
- err = phydev->drv->led_brightness_set(phydev, phyled->index, value);
+ err = phydev->drv->ops->led_brightness_set(phydev, phyled->index, value);
mutex_unlock(&phydev->lock);
return err;
@@ -3145,8 +3145,8 @@ static int phy_led_blink_set(struct led_classdev *led_cdev,
int err;
mutex_lock(&phydev->lock);
- err = phydev->drv->led_blink_set(phydev, phyled->index,
- delay_on, delay_off);
+ err = phydev->drv->ops->led_blink_set(phydev, phyled->index,
+ delay_on, delay_off);
mutex_unlock(&phydev->lock);
return err;
@@ -3172,7 +3172,7 @@ phy_led_hw_control_get(struct led_classdev *led_cdev,
int err;
mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_control_get(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_control_get(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);
return err;
@@ -3187,7 +3187,7 @@ phy_led_hw_control_set(struct led_classdev *led_cdev,
int err;
mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_control_set(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_control_set(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);
return err;
@@ -3201,7 +3201,7 @@ static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev,
int err;
mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_is_supported(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_is_supported(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);
return err;
@@ -3247,24 +3247,25 @@ static int of_phy_led(struct phy_device *phydev,
if (modes) {
/* Return error if asked to set polarity modes but not supported */
- if (!phydev->drv->led_polarity_set)
+ if (phydev->drv->ops && !phydev->drv->ops->led_polarity_set)
return -EINVAL;
- err = phydev->drv->led_polarity_set(phydev, index, modes);
+ err = phydev->drv->ops->led_polarity_set(phydev, index, modes);
if (err)
return err;
}
phyled->index = index;
- if (phydev->drv->led_brightness_set)
+ if (phydev->drv->ops && phydev->drv->ops->led_brightness_set)
cdev->brightness_set_blocking = phy_led_set_brightness;
- if (phydev->drv->led_blink_set)
+ if (phydev->drv->ops && phydev->drv->ops->led_blink_set)
cdev->blink_set = phy_led_blink_set;
#ifdef CONFIG_LEDS_TRIGGERS
- if (phydev->drv->led_hw_is_supported &&
- phydev->drv->led_hw_control_set &&
- phydev->drv->led_hw_control_get) {
+ if (phydev->drv->ops &&
+ phydev->drv->ops->led_hw_is_supported &&
+ phydev->drv->ops->led_hw_control_set &&
+ phydev->drv->ops->led_hw_control_get) {
cdev->hw_control_is_supported = phy_led_hw_is_supported;
cdev->hw_control_set = phy_led_hw_control_set;
cdev->hw_control_get = phy_led_hw_control_get;
@@ -3426,8 +3427,8 @@ static int phy_probe(struct device *dev)
/* Deassert the reset signal */
phy_device_reset(phydev, 0);
- if (phydev->drv->probe) {
- err = phydev->drv->probe(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->probe) {
+ err = phydev->drv->ops->probe(phydev);
if (err)
goto out;
}
@@ -3441,9 +3442,8 @@ static int phy_probe(struct device *dev)
if (phydrv->features) {
linkmode_copy(phydev->supported, phydrv->features);
genphy_c45_read_eee_abilities(phydev);
- }
- else if (phydrv->get_features)
- err = phydrv->get_features(phydev);
+ } else if (phydev->drv->ops && phydrv->ops->get_features)
+ err = phydrv->ops->get_features(phydev);
else if (phydev->is_c45)
err = genphy_c45_pma_read_abilities(phydev);
else
@@ -3540,8 +3540,9 @@ static int phy_remove(struct device *dev)
sfp_bus_del_upstream(phydev->sfp_bus);
phydev->sfp_bus = NULL;
- if (phydev->drv && phydev->drv->remove)
- phydev->drv->remove(phydev);
+ if (phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->remove)
+ phydev->drv->ops->remove(phydev);
/* Assert the reset signal */
phy_device_reset(phydev, 1);
@@ -3563,7 +3564,7 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
/* Either the features are hard coded, or dynamically
* determined. It cannot be both.
*/
- if (WARN_ON(new_driver->features && new_driver->get_features)) {
+ if (WARN_ON(new_driver->features && new_driver->ops && new_driver->ops->get_features)) {
pr_err("%s: features and get_features must not both be set\n",
new_driver->name);
return -EINVAL;
@@ -3637,10 +3638,12 @@ static struct phy_driver genphy_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_read_abilities,
.suspend = genphy_suspend,
.resume = genphy_resume,
.set_loopback = genphy_loopback,
+ },
};
static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
@@ -988,6 +988,7 @@ static struct phy_driver at803x_driver[] = {
PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
.name = "Qualcomm Atheros AR8035",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at8035_probe,
.config_aneg = at803x_config_aneg,
.config_init = at803x_config_init,
@@ -1004,11 +1005,13 @@ static struct phy_driver at803x_driver[] = {
.set_tunable = at803x_set_tunable,
.cable_test_start = at8031_cable_test_start,
.cable_test_get_status = at8031_cable_test_get_status,
+ },
}, {
/* Qualcomm Atheros AR8030 */
.phy_id = ATH8030_PHY_ID,
.name = "Qualcomm Atheros AR8030",
.phy_id_mask = AT8030_PHY_ID_MASK,
+ .ops = &(const struct phy_driver_ops){
.probe = at8035_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
@@ -1019,11 +1022,13 @@ static struct phy_driver at803x_driver[] = {
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
+ },
}, {
/* Qualcomm Atheros AR8031/AR8033 */
PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
.name = "Qualcomm Atheros AR8031/AR8033",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at8031_probe,
.config_init = at8031_config_init,
.config_aneg = at803x_config_aneg,
@@ -1042,12 +1047,14 @@ static struct phy_driver at803x_driver[] = {
.set_tunable = at803x_set_tunable,
.cable_test_start = at8031_cable_test_start,
.cable_test_get_status = at8031_cable_test_get_status,
+ },
}, {
/* Qualcomm Atheros AR8032 */
PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
.name = "Qualcomm Atheros AR8032",
- .probe = at803x_probe,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
+ .probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.suspend = at803x_suspend,
@@ -1057,14 +1064,16 @@ static struct phy_driver at803x_driver[] = {
.handle_interrupt = at803x_handle_interrupt,
.cable_test_start = at803x_cable_test_start,
.cable_test_get_status = at8032_cable_test_get_status,
+ },
}, {
/* ATHEROS AR9331 */
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
.name = "Qualcomm Atheros AR9331 built-in PHY",
+ .flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at803x_probe,
.suspend = at803x_suspend,
.resume = at803x_resume,
- .flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -1073,14 +1082,16 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.soft_reset = genphy_soft_reset,
.config_aneg = at803x_config_aneg,
+ },
}, {
/* Qualcomm Atheros QCA9561 */
PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
.name = "Qualcomm Atheros QCA9561 built-in PHY",
+ .flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at803x_probe,
.suspend = at803x_suspend,
.resume = at803x_resume,
- .flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -1089,6 +1100,7 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.soft_reset = genphy_soft_reset,
.config_aneg = at803x_config_aneg,
+ },
}, };
module_phy_driver(at803x_driver);
@@ -797,6 +797,7 @@ static struct phy_driver qca807x_drivers[] = {
.name = "Qualcomm QCA8072",
.flags = PHY_POLL_CABLE_TEST,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = qca807x_probe,
.config_init = qca807x_config_init,
.read_status = qca807x_read_status,
@@ -809,12 +810,14 @@ static struct phy_driver qca807x_drivers[] = {
.suspend = genphy_suspend,
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca808x_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
.name = "Qualcomm QCA8075",
.flags = PHY_POLL_CABLE_TEST,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = qca807x_probe,
.config_init = qca807x_config_init,
.read_status = qca807x_read_status,
@@ -832,6 +835,7 @@ static struct phy_driver qca807x_drivers[] = {
.led_hw_is_supported = qca807x_led_hw_is_supported,
.led_hw_control_set = qca807x_led_hw_control_set,
.led_hw_control_get = qca807x_led_hw_control_get,
+ },
},
};
module_phy_driver(qca807x_drivers);
@@ -609,6 +609,7 @@ static struct phy_driver qca808x_driver[] = {
PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
.name = "Qualcomm QCA8081",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = qca808x_probe,
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -632,6 +633,7 @@ static struct phy_driver qca808x_driver[] = {
.led_hw_control_set = qca808x_led_hw_control_set,
.led_hw_control_get = qca808x_led_hw_control_get,
.led_polarity_set = qca808x_led_polarity_set,
+ },
}, };
module_phy_driver(qca808x_driver);
@@ -220,8 +220,9 @@ static struct phy_driver qca83xx_driver[] = {
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8337 internal PHY",
/* PHY_GBIT_FEATURES */
- .probe = qca83xx_probe,
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
+ .probe = qca83xx_probe,
.config_init = qca83xx_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -229,15 +230,17 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8337_suspend,
.resume = qca83xx_resume,
+ },
}, {
/* QCA8327-A from switch QCA8327-AL1A */
.phy_id = QCA8327_A_PHY_ID,
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8327-A internal PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = qca83xx_link_change_notify,
.probe = qca83xx_probe,
- .flags = PHY_IS_INTERNAL,
.config_init = qca8327_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -245,15 +248,17 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8327_suspend,
.resume = qca83xx_resume,
+ },
}, {
/* QCA8327-B from switch QCA8327-BL1A */
.phy_id = QCA8327_B_PHY_ID,
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8327-B internal PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = qca83xx_link_change_notify,
.probe = qca83xx_probe,
- .flags = PHY_IS_INTERNAL,
.config_init = qca8327_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -261,6 +266,7 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8327_suspend,
.resume = qca83xx_resume,
+ },
}, };
module_phy_driver(qca83xx_driver);
@@ -148,9 +148,11 @@ static struct phy_driver qs6612_driver[] = { {
.name = "QS6612",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = qs6612_config_init,
.config_intr = qs6612_config_intr,
.handle_interrupt = qs6612_handle_interrupt,
+ },
} };
module_phy_driver(qs6612_driver);
@@ -867,37 +867,46 @@ static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
.name = "RTL8201CP Ethernet",
+ .ops = &(const struct phy_driver_ops){
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc816),
.name = "RTL8201F Fast Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = &rtl8201_config_intr,
.handle_interrupt = rtl8201_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_MODEL(0x001cc880),
.name = "RTL8208 Fast Ethernet",
+ .ops = &(const struct phy_driver_ops){
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc910),
.name = "RTL8211 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc912),
.name = "RTL8211B Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = &rtl8211b_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.read_mmd = &genphy_read_mmd_unsupported,
@@ -906,26 +915,32 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl8211b_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc913),
.name = "RTL8211C Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc914),
.name = "RTL8211DN Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc915),
.name = "RTL8211E Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = &rtl8211e_config_init,
.config_intr = &rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
@@ -933,9 +948,12 @@ static struct phy_driver realtek_drvs[] = {
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc916),
.name = "RTL8211F Gigabit Ethernet",
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
@@ -945,10 +963,12 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .flags = PHY_ALWAYS_CALL_SUSPEND,
+ },
}, {
PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
.name = "RTL8211F-VD Gigabit Ethernet",
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
@@ -958,9 +978,10 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .flags = PHY_ALWAYS_CALL_SUSPEND,
+ },
}, {
.name = "Generic FE-GE Realtek PHY",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = rtlgen_match_phy_device,
.read_status = rtlgen_read_status,
.suspend = genphy_suspend,
@@ -969,8 +990,10 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtlgen_read_mmd,
.write_mmd = rtlgen_write_mmd,
+ },
}, {
.name = "RTL8226 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = rtl8226_match_phy_device,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
@@ -981,9 +1004,11 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -993,9 +1018,11 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
.name = "RTL8226-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1003,9 +1030,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1013,9 +1042,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc849),
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1023,9 +1054,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc84a),
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1033,9 +1066,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc862),
.name = "RTL8251B 5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1043,9 +1078,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = &rtl8366rb_config_init,
/* These interrupts are handled by the irq controller
* embedded inside the RTL8366RB, they get unmasked when the
@@ -1056,10 +1093,12 @@ static struct phy_driver realtek_drvs[] = {
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001ccb00),
.name = "RTL9000AA_RTL9000AN Ethernet",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = rtl9000a_config_init,
.config_aneg = rtl9000a_config_aneg,
.read_status = rtl9000a_read_status,
@@ -1069,14 +1108,17 @@ static struct phy_driver realtek_drvs[] = {
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc942),
.name = "RTL8365MB-VC Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
/* Interrupt handling analogous to RTL8366RB */
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
},
};
@@ -177,12 +177,14 @@ static struct phy_driver rockchip_phy_driver[] = {
.name = "Rockchip integrated EPHY",
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = rockchip_link_change_notify,
.soft_reset = genphy_soft_reset,
.config_init = rockchip_integrated_phy_config_init,
.config_aneg = rockchip_config_aneg,
.suspend = genphy_suspend,
.resume = rockchip_phy_resume,
+ },
},
};
@@ -643,6 +643,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN83C185",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -656,12 +657,14 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8187",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -680,6 +683,7 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
/* This covers internal PHY (phy_id: 0x0007C0C3) for
* LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
@@ -689,6 +693,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN8700",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -712,12 +717,14 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN911x Internal PHY",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -727,6 +734,7 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
/* This covers internal PHY (phy_id: 0x0007C0F0) for
* LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
@@ -736,6 +744,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN8710/LAN8720",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -759,6 +768,7 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c110,
.phy_id_mask = 0xfffffff0,
@@ -766,6 +776,7 @@ static struct phy_driver smsc_phy_driver[] = {
/* PHY_BASIC_FEATURES */
.flags = PHY_RST_AFTER_CLK_EN,
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -792,6 +803,7 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c130, /* 0x0007c130 and 0x0007c131 */
/* This mask (0xfffffff2) is to differentiate from
@@ -803,6 +815,7 @@ static struct phy_driver smsc_phy_driver[] = {
/* PHY_BASIC_FEATURES */
.flags = PHY_RST_AFTER_CLK_EN,
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
@@ -829,6 +842,7 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(smsc_phy_driver);
@@ -105,21 +105,25 @@ static struct phy_driver ste10xp_pdriver[] = {
.phy_id_mask = 0xfffffff0,
.name = "STe101p",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = STE100P_PHY_ID,
.phy_id_mask = 0xffffffff,
.name = "STe100p",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(ste10xp_pdriver);
@@ -78,10 +78,12 @@ static struct phy_driver teranetics_driver[] = {
.phy_id_mask = 0xffffffff,
.name = "Teranetics TN2020",
.features = PHY_10GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.aneg_done = teranetics_aneg_done,
.config_aneg = gen10g_config_aneg,
.read_status = teranetics_read_status,
.match_phy_device = teranetics_match_phy_device,
+ },
},
};
@@ -84,8 +84,10 @@ static struct phy_driver upd60620_driver[1] = { {
.name = "Renesas uPD60620",
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.config_init = upd60620_config_init,
.read_status = upd60620_read_status,
+ },
} };
module_phy_driver(upd60620_driver);
@@ -408,99 +408,121 @@ static struct phy_driver vsc82xx_driver[] = {
.name = "Vitesse VSC8234",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8244,
.name = "Vitesse VSC8244",
.phy_id_mask = 0x000fffc0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8572,
.name = "Vitesse VSC8572",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8601,
.name = "Vitesse VSC8601",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8601_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC7385,
.name = "Vitesse VSC7385",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7388,
.name = "Vitesse VSC7388",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7395,
.name = "Vitesse VSC7395",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7398,
.name = "Vitesse VSC7398",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC8662,
.name = "Vitesse VSC8662",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
/* Vitesse 8221 */
.phy_id = PHY_ID_VSC8221,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8221",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
/* Vitesse 8211 */
.phy_id = PHY_ID_VSC8211,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8211",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
} };
module_phy_driver(vsc82xx_driver);
@@ -24,6 +24,7 @@ struct gmii2rgmii {
struct phy_device *phy_dev;
const struct phy_driver *phy_drv;
struct phy_driver conv_phy_drv;
+ struct phy_driver_ops conv_phy_drv_ops;
struct mdio_device *mdio;
};
@@ -51,8 +52,8 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
int err;
- if (priv->phy_drv->read_status)
- err = priv->phy_drv->read_status(phydev);
+ if (priv->phy_drv->ops && priv->phy_drv->ops->read_status)
+ err = priv->phy_drv->ops->read_status(phydev);
else
err = genphy_read_status(phydev);
if (err < 0)
@@ -68,8 +69,8 @@ static int xgmiitorgmii_set_loopback(struct phy_device *phydev, bool enable)
struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
int err;
- if (priv->phy_drv->set_loopback)
- err = priv->phy_drv->set_loopback(phydev, enable);
+ if (priv->phy_drv->ops && priv->phy_drv->ops->set_loopback)
+ err = priv->phy_drv->ops->set_loopback(phydev, enable);
else
err = genphy_loopback(phydev, enable);
if (err < 0)
@@ -113,8 +114,11 @@ static int xgmiitorgmii_probe(struct mdio_device *mdiodev)
priv->phy_drv = priv->phy_dev->drv;
memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
sizeof(struct phy_driver));
- priv->conv_phy_drv.read_status = xgmiitorgmii_read_status;
- priv->conv_phy_drv.set_loopback = xgmiitorgmii_set_loopback;
+ memcpy(&priv->conv_phy_drv_ops, priv->phy_dev->drv->ops,
+ sizeof(struct phy_driver_ops));
+ priv->conv_phy_drv_ops.read_status = xgmiitorgmii_read_status;
+ priv->conv_phy_drv_ops.set_loopback = xgmiitorgmii_set_loopback;
+ priv->conv_phy_drv.ops = &priv->conv_phy_drv_ops;
mdiodev_set_drvdata(&priv->phy_dev->mdio, priv);
priv->phy_dev->drv = &priv->conv_phy_drv;
@@ -882,19 +882,7 @@ struct phy_led {
#define to_phy_led(d) container_of(d, struct phy_led, led_cdev)
/**
- * struct phy_driver - Driver structure for a particular PHY type
- *
- * @mdiodrv: Data common to all MDIO devices
- * @phy_id: The result of reading the UID registers of this PHY
- * type, and ANDing them with the phy_id_mask. This driver
- * only works for PHYs with IDs which match this field
- * @name: The friendly name of this PHY type
- * @phy_id_mask: Defines the important bits of the phy_id
- * @features: A mandatory list of features (speed, duplex, etc)
- * supported by this PHY
- * @flags: A bitfield defining certain other features this PHY
- * supports (like interrupts)
- * @driver_data: Static driver data
+ * struct phy_driver_ops - Driver structure for all OPs of a particular PHY
*
* All functions are optional. If config_aneg or read_status
* are not implemented, the phy core uses the genphy versions.
@@ -903,16 +891,8 @@ struct phy_led {
* to be able to block when the bus transaction is happening,
* and be freed up by an interrupt (The MPC85xx has this ability,
* though it is not currently supported in the driver).
- */
-struct phy_driver {
- struct mdio_driver_common mdiodrv;
- u32 phy_id;
- char *name;
- u32 phy_id_mask;
- const unsigned long * const features;
- u32 flags;
- const void *driver_data;
-
+*/
+struct phy_driver_ops {
/**
* @soft_reset: Called to issue a PHY software reset
*/
@@ -1171,6 +1151,33 @@ struct phy_driver {
int (*led_polarity_set)(struct phy_device *dev, int index,
unsigned long modes);
};
+
+/**
+ * struct phy_driver - Driver structure for a particular PHY type
+ *
+ * @mdiodrv: Data common to all MDIO devices
+ * @phy_id: The result of reading the UID registers of this PHY
+ * type, and ANDing them with the phy_id_mask. This driver
+ * only works for PHYs with IDs which match this field
+ * @name: The friendly name of this PHY type
+ * @phy_id_mask: Defines the important bits of the phy_id
+ * @features: A mandatory list of features (speed, duplex, etc)
+ * supported by this PHY
+ * @flags: A bitfield defining certain other features this PHY
+ * supports (like interrupts)
+ * @driver_data: Static driver data
+ * @ops: Pointer to PHY driver OPs
+ */
+struct phy_driver {
+ struct mdio_driver_common mdiodrv;
+ u32 phy_id;
+ char *name;
+ u32 phy_id_mask;
+ const unsigned long * const features;
+ u32 flags;
+ const void *driver_data;
+ const struct phy_driver_ops *ops;
+};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)
@@ -1929,8 +1936,8 @@ static inline int phy_read_status(struct phy_device *phydev)
if (!phydev->drv)
return -EIO;
- if (phydev->drv->read_status)
- return phydev->drv->read_status(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->read_status)
+ return phydev->drv->ops->read_status(phydev);
else
return genphy_read_status(phydev);
}
Detach PHY driver OPs from phy_driver struct. This permits a strict separation between const OPs and PHY model/family specific values/flags. Many if not all PHYs driver currently have duplicated OPs for different PHY model/family where PHY_ID matching/mask can't be used. This limitation cause the side-effect of having to duplicate the PHY OPs for each PHY ID causing useless bloat/wasted space. To solve this problem, deatch PHY driver OPs from phy_driver so they can be declared statically and just be referenced by pointer. Each PHY driver is updated to this new phy_driver structure by simply declaring the OPs in a locally define struct inside phy_driver to reduce patch delta. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/net/phy/adin.c | 4 ++ drivers/net/phy/adin1100.c | 2 + drivers/net/phy/amd.c | 4 ++ drivers/net/phy/aquantia/aquantia_main.c | 26 ++++++++ drivers/net/phy/ax88796b.c | 6 ++ drivers/net/phy/bcm-cygnus.c | 4 ++ drivers/net/phy/bcm54140.c | 2 + drivers/net/phy/bcm63xx.c | 4 ++ drivers/net/phy/bcm7xxx.c | 8 +++ drivers/net/phy/bcm84881.c | 2 + drivers/net/phy/bcm87xx.c | 4 ++ drivers/net/phy/broadcom.c | 42 ++++++++++++ drivers/net/phy/cicada.c | 4 ++ drivers/net/phy/cortina.c | 2 + drivers/net/phy/davicom.c | 8 +++ drivers/net/phy/dp83640.c | 2 + drivers/net/phy/dp83822.c | 8 ++- drivers/net/phy/dp83848.c | 2 + drivers/net/phy/dp83867.c | 2 + drivers/net/phy/dp83869.c | 2 + drivers/net/phy/dp83tc811.c | 2 + drivers/net/phy/dp83td510.c | 2 + drivers/net/phy/dp83tg720.c | 2 + drivers/net/phy/et1011c.c | 2 + drivers/net/phy/icplus.c | 8 +++ drivers/net/phy/intel-xway.c | 20 ++++++ drivers/net/phy/lxt.c | 8 +++ drivers/net/phy/marvell-88q2xxx.c | 2 + drivers/net/phy/marvell-88x2222.c | 2 + drivers/net/phy/marvell.c | 44 +++++++++++- drivers/net/phy/marvell10g.c | 16 +++-- drivers/net/phy/mediatek-ge-soc.c | 4 ++ drivers/net/phy/mediatek-ge.c | 4 ++ drivers/net/phy/meson-gxl.c | 4 ++ drivers/net/phy/micrel.c | 54 ++++++++++++--- drivers/net/phy/microchip.c | 2 + drivers/net/phy/microchip_t1.c | 4 ++ drivers/net/phy/microchip_t1s.c | 4 ++ drivers/net/phy/motorcomm.c | 8 +++ drivers/net/phy/mscc/mscc_main.c | 30 +++++++++ drivers/net/phy/mxl-gpy.c | 24 +++++++ drivers/net/phy/national.c | 2 + drivers/net/phy/ncn26000.c | 2 + drivers/net/phy/nxp-c45-tja11xx.c | 8 ++- drivers/net/phy/nxp-cbtx.c | 2 + drivers/net/phy/nxp-tja11xx.c | 16 +++-- drivers/net/phy/phy-c45.c | 2 + drivers/net/phy/phy-core.c | 18 ++--- drivers/net/phy/phy.c | 85 ++++++++++++------------ drivers/net/phy/phy_device.c | 79 +++++++++++----------- drivers/net/phy/qcom/at803x.c | 18 ++++- drivers/net/phy/qcom/qca807x.c | 4 ++ drivers/net/phy/qcom/qca808x.c | 2 + drivers/net/phy/qcom/qca83xx.c | 12 +++- drivers/net/phy/qsemi.c | 2 + drivers/net/phy/realtek.c | 46 ++++++++++++- drivers/net/phy/rockchip.c | 2 + drivers/net/phy/smsc.c | 14 ++++ drivers/net/phy/ste10Xp.c | 4 ++ drivers/net/phy/teranetics.c | 2 + drivers/net/phy/uPD60620.c | 2 + drivers/net/phy/vitesse.c | 22 ++++++ drivers/net/phy/xilinx_gmii2rgmii.c | 16 +++-- include/linux/phy.h | 57 +++++++++------- 64 files changed, 654 insertions(+), 147 deletions(-)