@@ -635,7 +635,7 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
return 0;
}
-static int ov5645_set_power_off(struct device *dev)
+static void __ov5645_set_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ov5645 *ov5645 = to_ov5645(sd);
@@ -643,8 +643,16 @@ static int ov5645_set_power_off(struct device *dev)
ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
- clk_disable_unprepare(ov5645->xclk);
regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
+}
+
+static int ov5645_set_power_off(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5645 *ov5645 = to_ov5645(sd);
+
+ __ov5645_set_power_off(dev);
+ clk_disable_unprepare(ov5645->xclk);
return 0;
}
@@ -686,7 +694,8 @@ static int ov5645_set_power_on(struct device *dev)
return 0;
exit:
- ov5645_set_power_off(dev);
+ __ov5645_set_power_off(dev);
+ clk_disable_unprepare(ov5645->xclk);
return ret;
}
Factor out all the power off logic, except clk_disable_unprepare(), to a new function __ov5645_set_power_off(). This allows ov5645_set_power_on() to excplicitly clean-out the clock during the error-path. The following smatch warning is fixed: drivers/media/i2c/ov5645.c:690 ov5645_set_power_on() warn: 'ov5645->xclk' from clk_prepare_enable() not released on lines: 690. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> --- drivers/media/i2c/ov5645.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)