diff mbox series

[v4,5/9] reset: amlogic: use reset number instead of register count

Message ID 20240906-meson-rst-aux-v4-5-08824c3d108b@baylibre.com (mailing list archive)
State Superseded
Headers show
Series reset: amlogic: move audio reset drivers out of CCF | expand

Commit Message

Jerome Brunet Sept. 6, 2024, 1:34 p.m. UTC 
The reset driver from audio clock controller may register less
reset than a register can hold. To avoid making any change while
switching to auxiliary support, use the number of reset instead of the
register count to define the bounds of the reset controller.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/reset/reset-meson.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 6a90613c8095..e31c1b7c9e4d 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -17,7 +17,7 @@ 
 #include <linux/types.h>
 
 struct meson_reset_param {
-	unsigned int reg_count;
+	unsigned int reset_num;
 	unsigned int reset_offset;
 	unsigned int level_offset;
 	bool level_low_reset;
@@ -87,28 +87,28 @@  static const struct reset_control_ops meson_reset_ops = {
 };
 
 static const struct meson_reset_param meson8b_param = {
-	.reg_count	= 8,
+	.reset_num	= 256,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x7c,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param meson_a1_param = {
-	.reg_count	= 3,
+	.reset_num	= 96,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x40,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param meson_s4_param = {
-	.reg_count	= 6,
+	.reset_num	= 192,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x40,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param t7_param = {
-	.reg_count      = 7,
+	.reset_num      = 224,
 	.reset_offset	= 0x0,
 	.level_offset   = 0x40,
 	.level_low_reset = true,
@@ -156,8 +156,7 @@  static int meson_reset_probe(struct platform_device *pdev)
 				     "can't init regmap mmio region\n");
 
 	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
-		* regmap_config.reg_stride;
+	data->rcdev.nr_resets = data->param->reset_num;
 	data->rcdev.ops = &meson_reset_ops;
 	data->rcdev.of_node = dev->of_node;