diff mbox series

[v1,01/11] dt-bindings: mailbox: mpfs: fix reg properties

Message ID 20241002-stingily-condone-576e948e6d67@spud (mailing list archive)
State New
Headers show
Series Redo PolarFire SoC's mailbox/clock devicestrees and related code | expand

Commit Message

Conor Dooley Oct. 2, 2024, 10:47 a.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

When the binding for this was originally written, and later modified,
mistakes were made - and the precise nature of the later modification
should have been a giveaway, but alas I was naive at the time.

A more correct modelling of the hardware is to use two syscons and have
a single reg entry for the mailbox, containing the mailbox region. The
two syscons contain the general control/status registers for the mailbox
and the interrupt related registers respectively. The reason for two
syscons is that the same mailbox is present on the non-SoC version of
the FPGA, which has no interrupt controller, and the shared part of the
rtl was unchanged between devices.

This is now coming to a head, because the control/status registers share
a register region with the "tvs" (temperature & voltage sensors)
registers and, as it turns out, people do want to monitor temperatures
and voltages...

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/mailbox/microchip,mpfs-mailbox.yaml    | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

Comments

Rob Herring (Arm) Oct. 2, 2024, 11:13 p.m. UTC | #1
On Wed, 02 Oct 2024 11:47:59 +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> When the binding for this was originally written, and later modified,
> mistakes were made - and the precise nature of the later modification
> should have been a giveaway, but alas I was naive at the time.
> 
> A more correct modelling of the hardware is to use two syscons and have
> a single reg entry for the mailbox, containing the mailbox region. The
> two syscons contain the general control/status registers for the mailbox
> and the interrupt related registers respectively. The reason for two
> syscons is that the same mailbox is present on the non-SoC version of
> the FPGA, which has no interrupt controller, and the shared part of the
> rtl was unchanged between devices.
> 
> This is now coming to a head, because the control/status registers share
> a register region with the "tvs" (temperature & voltage sensors)
> registers and, as it turns out, people do want to monitor temperatures
> and voltages...
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../bindings/mailbox/microchip,mpfs-mailbox.yaml    | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
index 404477910f029..1332aab9a888f 100644
--- a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -15,6 +15,8 @@  properties:
 
   reg:
     oneOf:
+      - items:
+          - description: mailbox data registers
       - items:
           - description: mailbox control & data registers
           - description: mailbox interrupt registers
@@ -23,6 +25,7 @@  properties:
           - description: mailbox control registers
           - description: mailbox interrupt registers
           - description: mailbox data registers
+        deprecated: true
 
   interrupts:
     maxItems: 1
@@ -41,12 +44,12 @@  additionalProperties: false
 examples:
   - |
     soc {
-      #address-cells = <2>;
-      #size-cells = <2>;
-      mbox: mailbox@37020000 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mailbox@37020800 {
         compatible = "microchip,mpfs-mailbox";
-        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
-              <0x0 0x37020800 0x0 0x100>;
+        reg = <0x37020800 0x100>;
         interrupt-parent = <&L1>;
         interrupts = <96>;
         #mbox-cells = <1>;