[net-next,v2,1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

Commit Message

Heiner Kallweit Nov. 8, 2018, 11:27 p.m. UTC

Flag PHY_HAS_INTERRUPT is used only here for this small check. I think
using interrupts isn't possible if a driver defines neither
config_intr nor ack_interrupts callback. So we can replace checking
flag PHY_HAS_INTERRUPT with checking for these callbacks.

Signed-off-by: Heiner Kallweit <[e-mail]>
---
v2:
- add helper for the check
---
 drivers/net/phy/phy_device.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d165a2c82..70895bc3f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2083,6 +2083,11 @@  static void of_set_phy_eee_broken(struct phy_device *phydev)
 	phydev->eee_broken_modes = broken;
 }
 
+static bool phy_drv_supports_irq(struct phy_driver *phydrv)
+{
+	return phydrv->config_intr || phydrv->ack_interrupt;
+}
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init
@@ -2104,8 +2109,7 @@  static int phy_probe(struct device *dev)
 	/* Disable the interrupt if the PHY doesn't support it
 	 * but the interrupt is still a valid one
 	 */
-	if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
-	    phy_interrupt_is_valid(phydev))
+	if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
 		phydev->irq = PHY_POLL;
 
 	if (phydrv->flags & PHY_IS_INTERNAL)