mbox series

[V3,0/3] ARM: dts: add Raspberry Pi 3 A+

Message ID 1543949899-13380-1-git-send-email-stefan.wahren@i2se.com (mailing list archive)
Headers show
Series ARM: dts: add Raspberry Pi 3 A+ | expand

Message

Stefan Wahren Dec. 4, 2018, 6:58 p.m. UTC 
This patch series adds support for the brand new Raspberry Pi 3 A+ .
Since there is no official DTS file yet, this one bases on a procfs dump. 

Changes in V3:
- add Eric's Reviewed-by
- fix wifi reset GPIO polarity

Changes in V2:
- add missing Makefile change for arm64

Stefan Wahren (3):
  dt-bindings: bcm: Add Raspberry Pi 3 A+
  ARM: dts: add Raspberry Pi 3 A+
  arm64: dts: broadcom: Add reference to RPi 3 A+

 .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt   |   4 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts         | 107 +++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile              |   3 +-
 .../boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts     |   2 +
 5 files changed, 116 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts