| Message ID | 1544703110-27161-1-git-send-email-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | add PM functionality for act8945a PMIC | expand |
Hi Mark, I saw that previous version of this series was applied to your tree just after I've send this new one. The only difference b/w them is in the documentation patch where I moved the new header. No functionality change. Sorry for the noise, Claudiu Beznea On 13.12.2018 14:49, Claudiu Beznea - M18063 wrote: > From: Claudiu Beznea <claudiu.beznea@microchip.com> > > This series implements PM functionality for act8945a PMIC and use that support > on SAMA5D2 Xplained board. > > Changes in v4: > - move dt-bindings/regulator/active-semi,8945a-regulator.h in documentation > patch; driver uses macros included in this file; due to this documentation > patch and drivers patches should go through the same tree > - make documentation patch, patch 2 of this series > > Changes in v3: > - add patch "unlock expert registers"; it was wrongly missed in previous version > > Changes in v2: > - split patch 1/1 from previous series in 3 patches: one adding regmap, > one adding pm functionality, one adding shutdown functionality > - use dev_pm_ops suspend function to set register specific to PWRHLD line: this > is specific to PMIC itself and not to regulators > - add mode support for LDOs > - add constants for mode in dt-bindings/regulator/active-semi,8945a-regulator.h > - document modes and regulator suspend states > - remove rdevs from struct act8945a_pmic since were not used anywhere > - add op_mode field in struct act8945a_pmic, update it when setting mode and > return it when reading mode (avoiding one extra register read while > reading mode) > - add a patch to fix a checkpatch.pl warning > - in shutdown function use directly act8945a->regmap instead of an intermediary > struct regmap variable > > Boris Brezillon (2): > regulator: act8945a-regulator: Implement PM functionalities > ARM: dts: at91: sama5d2_xplained: Add proper regulator states for > suspend-to-mem > > Claudiu Beznea (3): > regulator: act8945a-regulator: fix line over 80 chars warning > regulator: act8945a-regulator: add shutdown function > regulator: add documentation for regulator modes and suspend states > > .../bindings/regulator/act8945a-regulator.txt | 34 ++++ > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 54 ++++++ > drivers/regulator/act8945a-regulator.c | 200 ++++++++++++++++++++- > .../regulator/active-semi,8945a-regulator.h | 30 ++++ > 4 files changed, 312 insertions(+), 6 deletions(-) > create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h >
On Thu, Dec 13, 2018 at 12:59:00PM +0000, Claudiu.Beznea@microchip.com wrote: > Hi Mark, > > I saw that previous version of this series was applied to your tree just > after I've send this new one. The only difference b/w them is in the > documentation patch where I moved the new header. No functionality change. > > Sorry for the noise, No problem.
From: Claudiu Beznea <claudiu.beznea@microchip.com> This series implements PM functionality for act8945a PMIC and use that support on SAMA5D2 Xplained board. Changes in v4: - move dt-bindings/regulator/active-semi,8945a-regulator.h in documentation patch; driver uses macros included in this file; due to this documentation patch and drivers patches should go through the same tree - make documentation patch, patch 2 of this series Changes in v3: - add patch "unlock expert registers"; it was wrongly missed in previous version Changes in v2: - split patch 1/1 from previous series in 3 patches: one adding regmap, one adding pm functionality, one adding shutdown functionality - use dev_pm_ops suspend function to set register specific to PWRHLD line: this is specific to PMIC itself and not to regulators - add mode support for LDOs - add constants for mode in dt-bindings/regulator/active-semi,8945a-regulator.h - document modes and regulator suspend states - remove rdevs from struct act8945a_pmic since were not used anywhere - add op_mode field in struct act8945a_pmic, update it when setting mode and return it when reading mode (avoiding one extra register read while reading mode) - add a patch to fix a checkpatch.pl warning - in shutdown function use directly act8945a->regmap instead of an intermediary struct regmap variable Boris Brezillon (2): regulator: act8945a-regulator: Implement PM functionalities ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem Claudiu Beznea (3): regulator: act8945a-regulator: fix line over 80 chars warning regulator: act8945a-regulator: add shutdown function regulator: add documentation for regulator modes and suspend states .../bindings/regulator/act8945a-regulator.txt | 34 ++++ arch/arm/boot/dts/at91-sama5d2_xplained.dts | 54 ++++++ drivers/regulator/act8945a-regulator.c | 200 ++++++++++++++++++++- .../regulator/active-semi,8945a-regulator.h | 30 ++++ 4 files changed, 312 insertions(+), 6 deletions(-) create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h