[0/8] stm32 m4 remoteproc on STM32MP157c

Message

Fabien DESSENNE March 5, 2019, 2:24 p.m. UTC

STMicrolectronics STM32MP157 MPU are based on a Dual Arm Cortex-A7 core and a
Cortex-M4.
This patchset adds the support of the stm32_rproc driver allowing to control
the M4 remote processor.

Fabien Dessenne (8):
  dt-bindings: stm32: add bindings for ML-AHB interconnect
  dt-bindings: remoteproc: add bindings for stm32 remote processor
    driver
  remoteproc: stm32: add an ST stm32_rproc driver
  ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
  ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
  ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
  ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
  ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1

 .../devicetree/bindings/arm/stm32/mlahb.txt        |  30 +
 .../devicetree/bindings/remoteproc/stm32-rproc.txt |  67 +++
 arch/arm/boot/dts/stm32mp157a-dk1.dts              |  54 ++
 arch/arm/boot/dts/stm32mp157c-ed1.dts              |  54 ++
 arch/arm/boot/dts/stm32mp157c.dtsi                 |  21 +
 drivers/remoteproc/Kconfig                         |  15 +
 drivers/remoteproc/Makefile                        |   1 +
 drivers/remoteproc/stm32_rproc.c                   | 624 +++++++++++++++++++++
 8 files changed, 866 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
 create mode 100644 Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
 create mode 100644 drivers/remoteproc/stm32_rproc.c

Comments

Alexandre TORGUE March 26, 2019, 10:37 a.m. UTC | #1

Hi fabien

On 3/5/19 3:24 PM, Fabien Dessenne wrote:
> STMicrolectronics STM32MP157 MPU are based on a Dual Arm Cortex-A7 core and a
> Cortex-M4.
> This patchset adds the support of the stm32_rproc driver allowing to control
> the M4 remote processor.
> 
> Fabien Dessenne (8):
>    dt-bindings: stm32: add bindings for ML-AHB interconnect
>    dt-bindings: remoteproc: add bindings for stm32 remote processor
>      driver
>    remoteproc: stm32: add an ST stm32_rproc driver
>    ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
>    ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
>    ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
>    ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
>    ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1
> 
>   .../devicetree/bindings/arm/stm32/mlahb.txt        |  30 +
>   .../devicetree/bindings/remoteproc/stm32-rproc.txt |  67 +++
>   arch/arm/boot/dts/stm32mp157a-dk1.dts              |  54 ++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts              |  54 ++
>   arch/arm/boot/dts/stm32mp157c.dtsi                 |  21 +
>   drivers/remoteproc/Kconfig                         |  15 +
>   drivers/remoteproc/Makefile                        |   1 +
>   drivers/remoteproc/stm32_rproc.c                   | 624 +++++++++++++++++++++
>   8 files changed, 866 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
>   create mode 100644 Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
>   create mode 100644 drivers/remoteproc/stm32_rproc.c
> 

Concerning DT patches, at first glance I don't see obvious issues. I'll 
take Dt patches as soon as driver and bindings patches are acked.

regards
Alex