mbox series

[v1,0/2] enable display on stm32mp157c-dk1 board

Message ID 1553863438-6720-1-git-send-email-yannick.fertre@st.com (mailing list archive)
Headers show
Series enable display on stm32mp157c-dk1 board | expand

Message

Yannick FERTRE March 29, 2019, 12:43 p.m. UTC 
Enable display on stm32mp157c-dk1 board. I2c node must be created first.

Yannick Fertré (2):
  ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board

 arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--
2.7.4

Comments

Alexandre TORGUE May 21, 2019, 10:22 a.m. UTC | #1 
Hi Yannick

On 3/29/19 1:43 PM, Yannick Fertré wrote:
> Enable display on stm32mp157c-dk1 board. I2c node must be created first.
> 
> Yannick Fertré (2):
>    ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
>    ARM: dts: stm32: enable display on stm32mp157c-dk1 board
> 
>   arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
>   1 file changed, 78 insertions(+)
> 
> --
> 2.7.4
> 

Series applied on stm32-next.

Regards
Alex