[0/5] stm32-ddr-pmu driver creation

Message

Gerald BAEZA April 29, 2019, 10:03 a.m. UTC

The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1 SOC.

This series adds support for the DDRPERFM via a new stm32-ddr-pmu driver,
registered into the perf framework.

This driver is inspired from arch/arm/mm/cache-l2x0-pmu.c

This series depends on the "clk: stm32mp1: Add ddrperfm clock" patch,
sent separately.

Gerald Baeza (5):
  Documentation: perf: stm32: ddrperfm support
  dt-bindings: perf: stm32: ddrperfm support
  perf: stm32: ddrperfm driver creation
  ARM: configs: enable STM32_DDR_PMU
  ARM: dts: stm32: add ddrperfm on stm32mp157c

 .../devicetree/bindings/perf/stm32-ddr-pmu.txt     |  18 +
 Documentation/perf/stm32-ddr-pmu.txt               |  41 ++
 arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 +
 arch/arm/configs/multi_v7_defconfig                |   1 +
 drivers/perf/Kconfig                               |   6 +
 drivers/perf/Makefile                              |   1 +
 drivers/perf/stm32_ddr_pmu.c                       | 502 +++++++++++++++++++++
 7 files changed, 578 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
 create mode 100644 Documentation/perf/stm32-ddr-pmu.txt
 create mode 100644 drivers/perf/stm32_ddr_pmu.c