| Message ID | 20180909234419.31261-1-jmkrzyszt@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ARM: OMAP1: ams-delta: Clean up GPIO setup for MODEM | expand |
On Monday, September 10, 2018 1:44:16 AM CEST Janusz Krzysztofik wrote: > > Convert modem related GPIO setup from integer space to GPIO descriptors. > Also, restore original initialization order of the MODEM device and its > related GPIO pins. > > Cleanup of MODEM relaated regulator setup is postponed while waiting for > upcoming conversion of fixed regulator API to GPIO descriptors. > > > Janusz Krzysztofik (3): > ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor > ARM: OMAP1: ams-delta: initialize latch2 pins to safe values > ARM: OMAP1: ams-delta: register MODEM device earlier > > > Changelog: > v2: > - rebased on v4.19-rc1 Hi Tony, I forgot to mention: please apply on top of "[PATCH v3 0/3] ARM: OMAP1: ams- delta: Complete driver gpiod migration" series. Sorry. Thanks, Janusz > - added Reviewed-by: obtained from Linus Walleij > > Please ignore the patch "ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO" > sent alone on 2018-07-17. > > Thanks, > Janusz > > > diffstat: > board-ams-delta.c | 121 ++++++++++++++++++++++++++++++++++++++ +--------------- > board-ams-delta.h | 7 --- > 2 files changed, 88 insertions(+), 40 deletions(-) > >
* Janusz Krzysztofik <jmkrzyszt@gmail.com> [180910 21:52]: > On Monday, September 10, 2018 1:44:16 AM CEST Janusz Krzysztofik wrote: > > > > Convert modem related GPIO setup from integer space to GPIO descriptors. > > Also, restore original initialization order of the MODEM device and its > > related GPIO pins. > > > > Cleanup of MODEM relaated regulator setup is postponed while waiting for > > upcoming conversion of fixed regulator API to GPIO descriptors. > > > > > > Janusz Krzysztofik (3): > > ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor > > ARM: OMAP1: ams-delta: initialize latch2 pins to safe values > > ARM: OMAP1: ams-delta: register MODEM device earlier > > > > > > Changelog: > > v2: > > - rebased on v4.19-rc1 > > Hi Tony, > > I forgot to mention: please apply on top of "[PATCH v3 0/3] ARM: OMAP1: ams- > delta: Complete driver gpiod migration" series. Sorry. Hmm but then in that thread you said that it won't apply.. So I'm applying this series into omap-for-v4.20/omap1 branch. I just modified the second patch in this series for the unchanged header location. I suggest you send the mtd patch separately to mtd maintainers, the fb patch separately to fb maintainers and then let's do the header move after all those are merged as a clean-up. That avoids some dependencies between these branches. Regards, Tony
Hi Tony, On Thursday, September 20, 2018 11:23:26 PM CEST Tony Lindgren wrote: > * Janusz Krzysztofik <jmkrzyszt@gmail.com> [180910 21:52]: > > On Monday, September 10, 2018 1:44:16 AM CEST Janusz Krzysztofik wrote: > > > > > > Convert modem related GPIO setup from integer space to GPIO descriptors. > > > Also, restore original initialization order of the MODEM device and its > > > related GPIO pins. > > > > > > Cleanup of MODEM relaated regulator setup is postponed while waiting for > > > upcoming conversion of fixed regulator API to GPIO descriptors. > > > > > > > > > Janusz Krzysztofik (3): > > > ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor > > > ARM: OMAP1: ams-delta: initialize latch2 pins to safe values > > > ARM: OMAP1: ams-delta: register MODEM device earlier > > > > > > > > > Changelog: > > > v2: > > > - rebased on v4.19-rc1 > > > > Hi Tony, > > > > I forgot to mention: please apply on top of "[PATCH v3 0/3] ARM: OMAP1: ams- > > delta: Complete driver gpiod migration" series. Sorry. > > Hmm but then in that thread you said that it won't apply.. So I'm applying > this series into omap-for-v4.20/omap1 branch. I just modified the second > patch in this series for the unchanged header location. OK, thank you. Janusz > I suggest you send the mtd patch separately to mtd maintainers, the fb patch > separately to fb maintainers and then let's do the header move after all > those are merged as a clean-up. That avoids some dependencies between these > branches. > > Regards, > > Tony >
Convert modem related GPIO setup from integer space to GPIO descriptors. Also, restore original initialization order of the MODEM device and its related GPIO pins. Cleanup of MODEM relaated regulator setup is postponed while waiting for upcoming conversion of fixed regulator API to GPIO descriptors. Janusz Krzysztofik (3): ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor ARM: OMAP1: ams-delta: initialize latch2 pins to safe values ARM: OMAP1: ams-delta: register MODEM device earlier Changelog: v2: - rebased on v4.19-rc1 - added Reviewed-by: obtained from Linus Walleij Please ignore the patch "ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO" sent alone on 2018-07-17. Thanks, Janusz diffstat: board-ams-delta.c | 121 +++++++++++++++++++++++++++++++++++++++--------------- board-ams-delta.h | 7 --- 2 files changed, 88 insertions(+), 40 deletions(-)