mbox series

[00/11] crypto: caam - add DPAA2 (DPSECI) driver

Message ID 20180910171550.5659-1-horia.geanta@nxp.com (mailing list archive)
Headers show
Series crypto: caam - add DPAA2 (DPSECI) driver | expand

Message

Horia Geanta Sept. 10, 2018, 5:15 p.m. UTC
Hi,

This patch set adds the CAAM crypto engine driver for DPAA2
(Data Path Acceleration Architecture v2) found on ARMv8-based SoCs
like LS1088A, LS2088A, LX2160A.

Previously sent RFC can be found here:
https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg27290.html

Driver consists of:
-DPSECI (Data Path SEC Interface) backend - low-level API that allows
to manage DPSECI devices (DPAA2 objects) that sit on
the Management Complex (MC) fsl-mc bus
-algorithms frontend - AEAD, skcipher and ahash algorithms implementation

Patches 1-4 are fsl-mc bus and DPIO dependencies.
Stuart, Laurentiu, Leo, Roy, please review the patches and let me know
if you have anything against going with them through the cryptodev tree.

Patches 5-10 are the core of the patch set, adding the driver.
For symmetric encryption the new skcipher interface is used.

Patch 11 enables driver on arm64. It will be built only if dependency
on DPIO (CONFIG_FSL_MC_DPIO) is satisfied.

Note: multiple modprobe/rmmod won't work without the following patches
[5/7,v7] bus/fsl-mc: support dma configure for devices on fsl-mc bus
https://patchwork.kernel.org/patch/10594179
[7/7,v7] arm64: dts: ls208xa: comply with the iommu map binding for fsl_mc
https://patchwork.kernel.org/patch/10594171
(for LS1088A a similar DT update is needed)

Thanks,
Horia

Horia Geantă (11):
  bus: fsl-mc: add support for dpseci device type
  Revert "staging: fsl-mc/dpio: remove couple of unused functions"
  soc: fsl: dpio: add frame list format support
  soc: fsl: dpio: add congestion notification support
  crypto: caam - add DPAA2-CAAM (DPSECI) backend API
  crypto: caam - add Queue Interface v2 error codes
  crypto: caam/qi2 - add DPAA2-CAAM driver
  crypto: caam/qi2 - add skcipher algorithms
  crypto: caam - export ahash shared descriptor generation
  crypto: caam/qi2 - add support for ahash algorithms
  arm64: defconfig: enable CAAM crypto engine on QorIQ DPAA2 SoCs

 arch/arm64/configs/defconfig        |    1 +
 drivers/bus/fsl-mc/fsl-mc-bus.c     |    5 +
 drivers/crypto/Makefile             |    2 +-
 drivers/crypto/caam/Kconfig         |   55 +-
 drivers/crypto/caam/Makefile        |   10 +-
 drivers/crypto/caam/caamalg_qi2.c   | 5165 +++++++++++++++++++++++++++++++++++
 drivers/crypto/caam/caamalg_qi2.h   |  223 ++
 drivers/crypto/caam/caamhash.c      |   79 +-
 drivers/crypto/caam/caamhash_desc.c |   80 +
 drivers/crypto/caam/caamhash_desc.h |   21 +
 drivers/crypto/caam/compat.h        |    1 +
 drivers/crypto/caam/dpseci.c        |  426 +++
 drivers/crypto/caam/dpseci.h        |  333 +++
 drivers/crypto/caam/dpseci_cmd.h    |  149 +
 drivers/crypto/caam/error.c         |   79 +-
 drivers/crypto/caam/error.h         |    6 +-
 drivers/crypto/caam/regs.h          |    2 +
 drivers/soc/fsl/dpio/dpio-service.c |   58 +
 include/linux/fsl/mc.h              |    6 +
 include/soc/fsl/dpaa2-fd.h          |  242 ++
 include/soc/fsl/dpaa2-global.h      |   15 +
 include/soc/fsl/dpaa2-io.h          |    4 +
 22 files changed, 6871 insertions(+), 91 deletions(-)
 create mode 100644 drivers/crypto/caam/caamalg_qi2.c
 create mode 100644 drivers/crypto/caam/caamalg_qi2.h
 create mode 100644 drivers/crypto/caam/caamhash_desc.c
 create mode 100644 drivers/crypto/caam/caamhash_desc.h
 create mode 100644 drivers/crypto/caam/dpseci.c
 create mode 100644 drivers/crypto/caam/dpseci.h
 create mode 100644 drivers/crypto/caam/dpseci_cmd.h