[v2,0/7] add edma2 for i.mx7ulp

Message

Robin Gong May 27, 2019, 8:51 a.m. UTC

From: Robin Gong <[e-mail]>

  This patch set add new version of edma for i.mx7ulp, the main changes
are as belows:
  1. only one dmamux.
  2. another clock dma_clk except dmamux clk.
  3. 16 independent interrupts instead of only one interrupt for
     all channels.
  For the first change, need modify fsl-edma-common.c and mcf-edma,
so create the first two patches to prepare without any function impact.
  For the third change, need request single irq for every channel with
the legacy handler. But actually 2 dma channels share one interrupt(16
channel interrupts, but 32 channels.),ch0/ch16,ch1/ch17... For now, just
simply request irq without IRQF_SHARED flag, since 16 channels are enough
on i.mx7ulp whose M4 domain own some peripherals.

change from v1:
  1. Check .data of 'of_device_id' in probe instead of compatible name.
  2. pull binding doc patch before driver  patch.

Robin Gong (7):
  dmaengine: fsl-edma: add dmamux_nr for next version
  dmaengine: mcf-edma: update to 'dmamux_nr'
  dmaengine: fsl-edma-common: move dmamux register to another single
    function
  dmaengine: fsl-edma-common: version check for v2 instead
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  ARM: dts: imx7ulp: add edma device node

 Documentation/devicetree/bindings/dma/fsl-edma.txt | 44 ++++++++--
 arch/arm/boot/dts/imx7ulp.dtsi                     | 28 +++++++
 drivers/dma/fsl-edma-common.c                      | 74 +++++++++++------
 drivers/dma/fsl-edma-common.h                      |  4 +
 drivers/dma/fsl-edma.c                             | 95 +++++++++++++++++++---
 drivers/dma/mcf-edma.c                             |  1 +
 6 files changed, 204 insertions(+), 42 deletions(-)