mbox series

[0/3] Add DSP node on i.MX8QXP board

Message ID 20190718151346.3523-1-daniel.baluta@nxp.com (mailing list archive)
Headers show
Series Add DSP node on i.MX8QXP board | expand

Message

Daniel Baluta July 18, 2019, 3:13 p.m. UTC 
i.MX8QXP boards feature an Hifi4 DSP from Tensilica. This patch series
adds the DT node.

Note that we switched to the new yaml format for bindings documentation.

The DSP will run SOF Firmware [1]. Patches adding support for Linux DSP
driver are already sent for review to SOF folks [2].

This patch series also contains a patch introducing DT related clocks.

The patch was already reviewed here:
	https://lkml.org/lkml/2019/7/17/975

but I added it in this patch series because it wasn't yet picked by
Shawn so patches 2/3 will not compiled without patch 1.

[1] https://github.com/thesofproject/sof
[2] https://github.com/thesofproject/linux/pull/1048/commits

Daniel Baluta (3):
  clk: imx8: Add DSP related clocks
  arm64: dts: imx8qxp: Add DSP DT node
  dt-bindings: dsp: fsl: Add DSP core binding support

 .../devicetree/bindings/dsp/fsl,dsp.yaml      | 87 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  4 +
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 32 +++++++
 drivers/clk/imx/clk-imx8qxp-lpcg.c            |  5 ++
 include/dt-bindings/clock/imx8-clock.h        |  6 +-
 5 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml

Comments

Marco Felsch July 19, 2019, 7 a.m. UTC | #1 
Hi Daniel,

thanks for your patches :) but it's quite common to bundle the driver
related and the dt related patches. Can you add the firmware related
patch to this series in your v2?

Regards,
  Marco

On 19-07-18 18:13, Daniel Baluta wrote:
> i.MX8QXP boards feature an Hifi4 DSP from Tensilica. This patch series
> adds the DT node.
> 
> Note that we switched to the new yaml format for bindings documentation.
> 
> The DSP will run SOF Firmware [1]. Patches adding support for Linux DSP
> driver are already sent for review to SOF folks [2].
> 
> This patch series also contains a patch introducing DT related clocks.
> 
> The patch was already reviewed here:
> 	https://lkml.org/lkml/2019/7/17/975
> 
> but I added it in this patch series because it wasn't yet picked by
> Shawn so patches 2/3 will not compiled without patch 1.
> 
> [1] https://github.com/thesofproject/sof
> [2] https://github.com/thesofproject/linux/pull/1048/commits
> 
> Daniel Baluta (3):
>   clk: imx8: Add DSP related clocks
>   arm64: dts: imx8qxp: Add DSP DT node
>   dt-bindings: dsp: fsl: Add DSP core binding support
> 
>  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 87 +++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  4 +
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 32 +++++++
>  drivers/clk/imx/clk-imx8qxp-lpcg.c            |  5 ++
>  include/dt-bindings/clock/imx8-clock.h        |  6 +-
>  5 files changed, 133 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> 
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Daniel Baluta July 19, 2019, 7:32 a.m. UTC | #2 
On Fri, Jul 19, 2019 at 10:00 AM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> Hi Daniel,
>
> thanks for your patches :) but it's quite common to bundle the driver
> related and the dt related patches. Can you add the firmware related
> patch to this series in your v2?

Sure. Will do that in v2.