[00/20] Add new Marvell CN9130 SoC support

Message

Miquel Raynal Aug. 6, 2019, 2:54 p.m. UTC

Hello,

This is the third and last batch of changes to support new
Marvell CN9130 SoCs. The CN9130 is made of one AP807 and one internal
CP115. There are three development boards that are made of this SoC:
* CN9130-DB
* CN9131-DB (with one additional modular CP115 compared to CN9130-DB)
* CN9132-DB (with two additional modular CP115 compared to CN9130-DB)

This series applies on top of the AP806 and AP807 clock series (see
below) and will work only if applied on top of:
* CP110 COMPHY:
https://patchwork.kernel.org/cover/11067647/
* AP806 CPU clocks:
https://patchwork.kernel.org/cover/11038577/
* AP807 clocks:
https://patchwork.kernel.org/cover/11076435/
* CP115 pinctrl:
http://patchwork.ozlabs.org/cover/1142107/

As CP110 and CP115 (alternatively, AP806 and AP807) are very similar,
we first reorganize DT files to create CP11x (and AP80x) generic
files, before including them from the new specific CP110/CP115
(AP806/AP807) ones.

A few small improvements/fixes in these files are also carried.

Thanks,
Miquèl


Ben Peled (1):
  dt-bindings: ap80x: replace AP806 with AP80x

Grzegorz Jaszczyk (7):
  arm64: dts: marvell: Add AP806-dual cache description
  arm64: dts: marvell: Add AP806-quad cache description
  arm64: dts: marvell: Add AP807-quad cache description
  dt-bindings: marvell: Declare the CN913x SoC compatibles
  arm64: dts: marvell: Add support for Marvell CN9130-DB
  arm64: dts: marvell: Add support for Marvell CN9131-DB
  arm64: dts: marvell: Add support for Marvell CN9132-DB

Konstantin Porotchkin (1):
  arm64: dts: marvell: Prepare the introduction of AP807 based SoCs

Miquel Raynal (11):
  arm64: dts: marvell: Enumerate the first AP806 syscon
  arm64: dts: marvell: Add AP806-dual missing CPU clocks
  MAINTAINERS: Add new Marvell CN9130-based files to track
  arm64: dts: marvell: Move clocks to AP806 specific file
  arm64: dts: marvell: Add support for AP807/AP807-quad
  arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment
    alignment
  arm64: dts: marvell: Prepare the introduction of CP115
  arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
  arm64: dts: marvell: Externalize PCIe macros from CP11x file
  arm64: dts: marvell: Add support for CP115
  arm64: dts: marvell: Add support for Marvell CN9130 SoC support

 ...roller.txt => ap80x-system-controller.txt} |  14 +-
 .../bindings/arm/marvell/armada-7k-8k.txt     |  13 +-
 MAINTAINERS                                   |   3 +-
 arch/arm64/boot/dts/marvell/Makefile          |   3 +
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |  28 +-
 .../boot/dts/marvell/armada-8040-mcbin.dtsi   |   3 +-
 arch/arm64/boot/dts/marvell/armada-80x0.dtsi  |  56 +-
 .../boot/dts/marvell/armada-ap806-dual.dtsi   |  23 +
 .../boot/dts/marvell/armada-ap806-quad.dtsi   |  42 ++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 456 +-------------
 .../boot/dts/marvell/armada-ap807-quad.dtsi   |  93 +++
 arch/arm64/boot/dts/marvell/armada-ap807.dtsi |  29 +
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 444 ++++++++++++++
 .../arm64/boot/dts/marvell/armada-common.dtsi |   4 +-
 arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +-----------------
 arch/arm64/boot/dts/marvell/armada-cp115.dtsi |  12 +
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 568 +++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9130-db.dts     | 403 ++++++++++++
 arch/arm64/boot/dts/marvell/cn9130.dtsi       |  37 ++
 arch/arm64/boot/dts/marvell/cn9131-db.dts     | 202 ++++++
 arch/arm64/boot/dts/marvell/cn9132-db.dts     | 221 +++++++
 21 files changed, 2161 insertions(+), 1068 deletions(-)
 rename Documentation/devicetree/bindings/arm/marvell/{ap806-system-controller.txt => ap80x-system-controller.txt} (91%)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db.dts